Aluminum Electrolytic Capacitors/ FC Radial Lead Type Series: FC Type: A ■ Features ● Endurance : 105 °C 1000 h to 5000 h ● Low impedance ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current –55 °C to +105 °C 6.3 V.DC to 100 V.DC 2.2 μF to 15000 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) W.V. (V) 6.3 10 16 25 35 50 63 100 tan d 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 tan d (120 Hz/+20 °C) For capacitance value > 1000 μF, add 0.02 per every 1000 μF. After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified bellow. Duration : 04 to 06.3: 1000 hours, 08: 2000 hours , 010: 3000 hours , 012.5 to 018: 5000 hours Endurance Capacitance change ±20 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life ■ Frequency correction factor for ripple current W.V.(V.DC) Frequency (Hz) Cap (μF) 2.2 to 120 1k 10 k 100 k 330 0.55 0.65 0.85 0.90 1.00 to 1000 0.70 0.75 0.90 0.95 1.00 1200 to 2200 0.75 0.80 0.90 0.95 1.00 2700 to 15000 0.80 0.85 0.95 1.00 1.00 390 6.3 to 100 60 ■ Dimensions in mm (not to scale) (Unit : mm) Sleeve 04 to 08 0d±0.05 Pressure relief 06.3 010 + L= 14 min. 0D±0.5 3 min. F±0.5 – But exclude 7 mm height 0D±0.5 = L16 : L±1.0 (=08L15, 016L15, 018L15 : L±1.5) L20 : L±2.0 L>11 Body Dia. 0D L=7 4 5 6.3 8 10 12.5 Lead Dia. 0d 0.45 0.5 0.5 0.6 0.6 0.6 Lead space F 1.5 2.0 2.5 3.5 5.0 5.0 16 18 4 5 6.3 0.8 0.8 0.8 0.45 0.45 0.45 5.0 7.5 7.5 1.5 2.0 2.5 15 to 25 30 to 40 Body Length L Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Dec. 2013 – EEE-63 – Aluminum Electrolytic Capacitors/ FC ■ Case size/ Impedance/ Ripple Current 6.3 V to 35 V W.V(V.DC) Case size (0D×L) 50 V 63 V 100 V Ripple Ripple Ripple Ripple Impedance Impedance Impedance Impedance Current Current Current Current (Ω)/(100 kHz) (Ω)/(100 kHz) (Ω)/(100 kHz) (Ω)/(100 kHz) (mA r.m.s) (mA r.m.s) (mA r.m.s) (mA r.m.s) 20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz) 20 °C –10 °C /(100 kHz) 4 × 7 5 × 7 0.950 2.40 120 6.3 × 7 0.450 1.20 200 2.00 5.00 65 4 × 11 1.30 2.60 120 2.50 5.00 90 3.50 7.00 80 5 × 11 0.800 1.60 175 145 4.10 8.20 80 0.500 1.00 235 ✽ 215 4.00 × 15 ✽ 1.80 2.00 5 ✽ 0.900 1.30 2.60 200 2.80 5.60 90 6.3 × 11.2 0.350 0.700 290 0.600 1.20 260 1.00 2.00 240 1.80 3.60 114 6.3 × 15 0.250 0.500 400 0.400 0.800 360 0.700 1.40 330 1.10 2.20 155 8 × 11.5 0.117 0.234 555 0.234 0.468 485 0.342 0.684 405 0.680 1.36 260 8 × 15 0.085 0.170 730 0.155 0.310 635 0.230 0.460 535 0.450 0.900 340 8 × 20 0.065 0.130 995 0.120 0.240 860 0.178 0.356 690 0.330 0.660 455 10 × 12.5 0.090 0.180 755 0.162 0.324 615 0.256 0.512 535 0.530 1.06 306 10 × 16 0.068 0.136 1050 0.119 0.238 850 0.194 0.388 600 0.360 0.720 400 10 × 20 0.052 0.104 1220 0.090 0.180 1030 0.147 0.294 885 0.240 0.480 463 10 × 25 0.045 0.090 1440 0.082 0.164 1200 0.130 0.260 1050 0.210 0.420 599 10 × 30 0.035 0.070 1815 0.060 0.120 1610 0.090 0.180 1300 0.150 0.300 698 12.5 × 15 0.065 0.130 1205 0.110 0.220 1150 0.150 0.300 1020 0.230 0.460 511 12.5 × 20 0.038 0.076 1655 0.063 0.126 1480 0.085 0.170 1285 0.180 0.360 671 12.5 × 25 0.030 0.060 1945 0.050 0.100 1832 0.070 0.140 1720 0.110 0.220 807 12.5 × 30 0.025 0.050 2310 0.040 0.080 2215 0.055 0.110 2090 0.098 0.196 937 12.5 × 35 0.022 0.044 2510 0.034 0.068 2285 0.047 0.094 2265 0.087 0.174 1040 12.5 × 40 0.018 0.036 2655 0.030 0.060 2590 0.042 0.084 2560 0.072 0.144 1130 16 × 15 0.043 0.086 1690 0.080 0.160 1610 0.090 0.180 1410 0.140 0.280 793 16 × 20 0.029 0.058 2205 0.048 0.096 1835 0.059 0.118 1765 0.110 0.220 995 16 × 25 0.022 0.044 2555 0.034 0.068 2235 0.050 0.100 2160 0.089 0.178 1170 16 × 31.5 0.018 0.036 3010 0.028 0.056 2700 0.043 0.086 2670 0.062 0.124 1520 16 × 35.5 0.016 0.032 3150 0.025 0.050 2790 0.036 0.072 2770 0.053 0.106 1730 16 × 40 0.015 0.030 3360 0.023 0.046 2845 0.030 0.060 2825 0.047 0.094 1920 18 × 15 0.038 0.076 2000 0.068 0.136 1900 0.086 0.172 1690 0.120 0.240 917 18 × 20 0.028 0.056 2490 0.042 0.084 2420 0.055 0.110 2290 0.080 0.160 1230 18 × 25 0.020 0.040 2740 0.029 0.058 2610 0.043 0.086 2585 0.070 0.140 1420 18 × 31.5 0.016 0.032 3635 0.025 0.050 3000 0.032 0.064 2950 0.062 0.124 1600 18 18 × 35.5 × 40 0.015 0.014 0.030 0.028 3680 3735 0.023 – 0.046 – 3100 – 0.030 0.025 0.060 0.050 3095 3205 0.041 0.036 0.082 0.072 1770 2300 ✽ Case size (0D×L) Capacitance (μF) 5 × 11 1.0 2.2 3.3 4.7 10 12 15 18 22 Impedance (Ω)/(100 kHz) 20 °C 2.40 1.80 1.30 1.30 1.30 1.30 1.30 1.30 1.30 –10 °C 4.80 3.60 2.60 2.60 2.60 2.60 2.60 2.60 2.60 Ripple Current (mA r.m.s)(100 kHz) 20 45 65 95 125 135 145 155 155 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 – EEE-64 – Oct. 2013 Aluminum Electrolytic Capacitors/ FC ■ Standard Products Endurance : 105 °C φ4 to φ6.3=1000 h, φ8=2000 h, φ10=3000 h, φ12.5 to φ18=5000 h Case size Specification Lead Length Ripple Imped- Endur- Lead Lead Space Cap. W.V. (±20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (V) (µF) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 27 56 68 100 120 150 220 270 330 390 470 560 820 1000 1200 1500 6.3 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 4 5 4 5 6.3 5 6.3 6.3 6.3 6.3 8 8 8 8 10 10 8 10 10 12.5 10 10 16 10 12.5 16 12.5 18 12.5 12.5 16 12.5 16 12.5 16 18 16 16 18 16 18 18 7 7 11 11 7 15 11.2 11.2 11.2 15 11.5 11.5 11.5 15 12.5 12.5 20 16 20 15 25 25 15 30 20 15 20 15 25 30 20 35 20 40 25 20 31.5 35.5 25 40 31.5 35.5 65 120 120 175 200 235 290 290 290 400 555 555 555 730 755 755 995 1050 1220 1205 1440 1440 1690 1815 1655 1690 1655 2000 1945 2310 2205 2510 2205 2655 2555 2490 3010 3150 2740 3360 3635 3680 2.000 0.950 1.300 0.800 0.450 0.500 0.350 0.350 0.350 0.250 0.117 0.117 0.117 0.085 0.090 0.090 0.065 0.068 0.052 0.065 0.045 0.045 0.043 0.035 0.038 0.043 0.038 0.038 0.030 0.025 0.029 0.022 0.029 0.018 0.022 0.028 0.018 0.016 0.020 0.015 0.016 0.015 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 2000 2000 2000 3000 3000 2000 3000 3000 5000 3000 3000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.45 0.45 0.45 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 1.5 2.0 2.5 2.0 2.5 2.5 2.5 2.5 3.5 3.5 3.5 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 5.0 7.5 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEAFC0J270( ) EEAFC0J560( ) EEUFC0J680( ) EEUFC0J101( ) EEAFC0J121( ) EEUFC0J151( ) EEUFC0J221( ) EEUFC0J271( ) EEUFC0J331S( ) EEUFC0J331( ) EEUFC0J391( ) EEUFC0J471( ) EEUFC0J561( ) EEUFC0J821L( ) EEUFC0J821( ) EEUFC0J102( ) EEUFC0J122L( ) EEUFC0J122( ) EEUFC0J152( ) EEUFC0J152S( ) EEUFC0J182( ) EEUFC0J222( ) EEUFC0J222S( ) EEUFC0J272L EEUFC0J272( ) EEUFC0J272S( ) EEUFC0J332( ) EEUFC0J332S( ) EEUFC0J392( ) EEUFC0J472 EEUFC0J472S( ) EEUFC0J562L EEUFC0J562( ) EEUFC0J682L EEUFC0J682( ) EEUFC0J682S( ) EEUFC0J822 EEUFC0J103 EEUFC0J103S( ) EEUFC0J123L EEUFC0J123 EEUFC0J153 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 100 50 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 500 500 1000 500 500 500 500 500 250 500 250 500 250 500 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-65 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ FC ■ Standard Products Endurance : 105 °C φ4 to φ6.3=1000 h, φ8=2000 h, φ10=3000 h, φ12.5 to φ18=5000 h Case size Specification Lead Length Ripple Imped- Endur- Lead Lead Space Cap. W.V. (±20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (V) (µF) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 22 39 47 82 100 150 180 220 330 390 470 560 680 820 1000 10 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 4 5 4 5 6.3 5 5 6.3 6.3 6.3 6.3 8 8 8 10 8 10 10 8 10 10 12.5 10 12.5 16 10 12.5 12.5 18 12.5 16 12.5 16 12.5 16 16 18 16 18 16 18 18 18 7 7 11 11 7 11 15 11.2 11.2 11.2 15 11.5 11.5 11.5 12.5 15 12.5 16 20 16 20 15 25 20 15 30 20 25 15 30 20 35 20 40 25 25 20 31.5 25 35.5 31.5 35.5 40 65 120 120 175 200 175 235 290 290 290 400 555 555 555 755 730 755 1050 995 1050 1220 1205 1440 1655 1690 1815 1655 1945 2000 2310 2205 2510 2205 2655 2555 2555 2490 3010 2740 3150 3635 3680 3735 2.000 0.950 1.300 0.800 0.450 0.800 0.500 0.350 0.350 0.350 0.250 0.117 0.117 0.117 0.090 0.085 0.090 0.068 0.065 0.068 0.052 0.065 0.045 0.038 0.043 0.035 0.038 0.030 0.038 0.025 0.029 0.022 0.029 0.018 0.022 0.022 0.028 0.018 0.020 0.016 0.016 0.015 0.014 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 2000 2000 3000 2000 3000 3000 2000 3000 3000 5000 3000 5000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.45 0.45 0.45 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 1.5 2.0 2.5 2.0 2.0 2.5 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEAFC1A220( ) EEAFC1A390( ) EEUFC1A470( ) EEUFC1A820( ) EEAFC1A820( ) EEUFC1A101S( ) EEUFC1A101( ) EEUFC1A151( ) EEUFC1A181( ) EEUFC1A221S( ) EEUFC1A221( ) EEUFC1A331( ) EEUFC1A391( ) EEUFC1A471( ) EEUFC1A561( ) EEUFC1A681L( ) EEUFC1A681( ) EEUFC1A821( ) EEUFC1A102L( ) EEUFC1A102( ) EEUFC1A122( ) EEUFC1A122S( ) EEUFC1A152( ) EEUFC1A182( ) EEUFC1A182S( ) EEUFC1A222L EEUFC1A222( ) EEUFC1A272( ) EEUFC1A272S( ) EEUFC1A332 EEUFC1A332S( ) EEUFC1A392L EEUFC1A392( ) EEUFC1A472L EEUFC1A472( ) EEUFC1A562( ) EEUFC1A562S( ) EEUFC1A682 EEUFC1A682S( ) EEUFC1A822L EEUFC1A822 EEUFC1A103 EEUFC1A123 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 250 500 500 250 250 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-66 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ FC ■ Standard Products Endurance : 105 °C φ4 to φ6.3=1000 h, φ8=2000 h, φ10=3000 h, φ12.5 to φ18=5000 h Case size Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. W.V. (±20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (V) (µF) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 15 27 39 47 56 68 82 100 120 180 220 270 330 390 470 560 680 820 16 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 4 5 4 5 5 6.3 5 5 6.3 6.3 6.3 8 8 8 10 8 10 10 8 10 10 12.5 10 10 10 16 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 18 16 18 16 18 16 18 16 18 7 7 11 11 11 7 11 15 11.2 11.2 15 11.5 11.5 11.5 12.5 15 12.5 16 20 16 20 15 20 25 25 15 30 20 15 25 15 25 20 30 20 35 20 25 20 31.5 25 35.5 31.5 40 35.5 65 120 120 175 175 200 175 235 290 290 400 555 555 555 755 730 755 1050 995 1050 1220 1205 1220 1440 1440 1690 1815 1655 1690 1945 2000 1945 2205 2310 2205 2510 2490 2555 2490 3010 2740 3150 3635 3360 3680 2.000 0.950 1.30 0.800 0.800 0.450 0.800 0.500 0.350 0.350 0.250 0.117 0.117 0.117 0.090 0.085 0.090 0.068 0.065 0.068 0.052 0.065 0.052 0.045 0.045 0.043 0.035 0.038 0.043 0.030 0.038 0.030 0.029 0.025 0.029 0.022 0.028 0.022 0.028 0.018 0.020 0.016 0.016 0.015 0.015 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 2000 2000 3000 2000 3000 3000 2000 3000 3000 5000 3000 3000 3000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.45 0.45 0.45 0.50 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 1.5 2.0 2.0 2.5 2.0 2.0 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEAFC1C150( ) EEAFC1C270( ) EEUFC1C390( ) EEUFC1C470( ) EEUFC1C560( ) EEAFC1C560( ) EEUFC1C680( ) EEUFC1C820( ) EEUFC1C101( ) EEUFC1C121( ) EEUFC1C181( ) EEUFC1C221( ) EEUFC1C271( ) EEUFC1C331( ) EEUFC1C391( ) EEUFC1C471L( ) EEUFC1C471( ) EEUFC1C561( ) EEUFC1C681L( ) EEUFC1C681( ) EEUFC1C821( ) EEUFC1C821S( ) EEUFC1C102S( ) EEUFC1C102( ) EEUFC1C122( ) EEUFC1C122S( ) EEUFC1C152L EEUFC1C152( ) EEUFC1C152S( ) EEUFC1C182( ) EEUFC1C182S( ) EEUFC1C222( ) EEUFC1C222S( ) EEUFC1C272L EEUFC1C272( ) EEUFC1C332 EEUFC1C332S( ) EEUFC1C392( ) EEUFC1C392S( ) EEUFC1C472 EEUFC1C472S( ) EEUFC1C562L EEUFC1C562 EEUFC1C682 EEUFC1C822 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 50 100 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 250 500 250 500 250 500 250 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-67 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ FC ■ Standard Products Endurance : 105 °C φ4 to φ6.3=1000 h, φ8=2000 h, φ10=3000 h, φ12.5 to φ18=5000 h Case size Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. W.V. (±20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (V) (µF) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 10 22 27 39 47 56 82 100 120 180 220 270 330 390 470 560 25 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 4 5 4 5 6.3 5 5 6.3 6.3 6.3 8 8 10 8 10 10 8 10 10 12.5 10 10 12.5 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 18 16 16 18 16 18 18 18 7 7 11 11 7 11 15 11.2 11.2 15 11.5 11.5 12.5 15 12.5 16 20 16 20 15 20 25 20 30 20 15 25 15 25 20 30 20 35 20 25 31.5 25 35.5 31.5 35.5 40 65 120 120 175 200 175 235 290 290 400 555 555 755 730 755 1050 995 1050 1220 1205 1220 1440 1655 1815 1655 1690 1945 2000 1945 2205 2310 2205 2510 2490 2555 3010 2740 3150 3635 3680 3735 2.000 0.950 1.30 0.800 0.450 0.800 0.500 0.350 0.350 0.250 0.117 0.117 0.090 0.085 0.090 0.068 0.065 0.068 0.052 0.065 0.052 0.045 0.038 0.035 0.038 0.043 0.030 0.038 0.030 0.029 0.025 0.029 0.022 0.028 0.022 0.018 0.020 0.016 0.016 0.015 0.014 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 2000 3000 2000 3000 3000 2000 3000 3000 5000 3000 3000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.45 0.45 0.45 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 1.5 2.0 2.5 2.0 2.0 2.5 2.5 2.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEAFC1E100( ) EEAFC1E220( ) EEUFC1E270( ) EEUFC1E390( ) EEAFC1E390( ) EEUFC1E470( ) EEUFC1E560( ) EEUFC1E820( ) EEUFC1E101S( ) EEUFC1E121( ) EEUFC1E181( ) EEUFC1E221( ) EEUFC1E271( ) EEUFC1E331L( ) EEUFC1E331( ) EEUFC1E391( ) EEUFC1E471L( ) EEUFC1E471( ) EEUFC1E561( ) EEUFC1E561S( ) EEUFC1E681( ) EEUFC1E821( ) EEUFC1E821S( ) EEUFC1E102L EEUFC1E102( ) EEUFC1E102S( ) EEUFC1E122( ) EEUFC1E122S( ) EEUFC1E152( ) EEUFC1E152S( ) EEUFC1E182L EEUFC1E182( ) EEUFC1E222 EEUFC1E222S( ) EEUFC1E272( ) EEUFC1E332 EEUFC1E332S( ) EEUFC1E392L EEUFC1E392 EEUFC1E472 EEUFC1E562 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 50 50 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 500 250 500 250 500 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-68 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ FC ■ Standard Products Endurance : 105 °C φ4 to φ6.3=1000 h, φ8=2000 h, φ10=3000 h, φ12.5 to φ18=5000 h Case size Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. W.V. (±20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (V) (µF) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 6.8 12 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 35 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4 5 4 5 5 6.3 5 5 6.3 6.3 6.3 6.3 8 8 8 10 8 10 10 8 10 10 12.5 10 10 12.5 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 16 18 12.5 16 18 16 18 16 18 18 18 7 7 11 11 11 7 11 15 11.2 11.2 11.2 15 11.5 11.5 11.5 12.5 15 12.5 16 20 16 20 15 20 25 20 30 20 15 25 15 25 20 30 20 35 25 20 40 25 20 31.5 25 35.5 31.5 35.5 40 65 120 120 175 175 200 175 235 290 290 290 400 555 555 555 755 730 755 1050 995 1050 1220 1205 1220 1440 1655 1815 1655 1690 1945 2000 1945 2205 2310 2205 2510 2555 2490 2655 2555 2490 3010 2740 3150 3635 3680 3735 2.000 0.950 1.300 0.800 0.800 0.450 0.080 0.500 0.350 0.350 0.350 0.250 0.117 0.117 0.117 0.090 0.085 0.090 0.068 0.065 0.068 0.052 0.065 0.052 0.045 0.038 0.035 0.038 0.043 0.030 0.038 0.030 0.029 0.025 0.029 0.022 0.022 0.028 0.018 0.022 0.028 0.018 0.020 0.016 0.016 0.015 0.014 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 2000 2000 3000 2000 3000 3000 2000 3000 3000 5000 3000 3000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.45 0.45 0.45 0.50 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 1.5 2.0 2.0 2.5 2.0 2.0 2.5 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEAFC1V6R8( ) EEAFC1V120( ) EEUFC1V180( ) EEUFC1V220( ) EEUFC1V270( ) EEAFC1V270( ) EEUFC1V330( ) EEUFC1V390( ) EEUFC1V470( ) EEUFC1V560( ) EEUFC1V680( ) EEUFC1V820( ) EEUFC1V101( ) EEUFC1V121( ) EEUFC1V151( ) EEUFC1V181( ) EEUFC1V221L( ) EEUFC1V221( ) EEUFC1V271( ) EEUFC1V331L( ) EEUFC1V331( ) EEUFC1V391( ) EEUFC1V391S( ) EEUFC1V471( ) EEUFC1V561( ) EEUFC1V561S( ) EEUFC1V681L EEUFC1V681( ) EEUFC1V681S( ) EEUFC1V821L( ) EEUFC1V821( ) EEUFC1V102( ) EEUFC1V102S( ) EEUFC1V122L EEUFC1V122( ) EEUFC1V152L EEUFC1V152( ) EEUFC1V152S( ) EEUFC1V182L EEUFC1V182( ) EEUFC1V182S( ) EEUFC1V222 EEUFC1V222S( ) EEUFC1V272L EEUFC1V272 EEUFC1V332 EEUFC1V392 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 500 250 500 250 500 250 250 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-69 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ FC ■ Standard Products Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size Specification Lead Length Ripple Imped- Endur- Lead Lead Space Cap. W.V. (±20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (V) (μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm) 1.0 2.2 3.3 4.7 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 50 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 5 5 5 5 4 5 5 5 5 5 5 6.3 6.3 6.3 6.3 8 8 10 8 10 10 8 10 10 12.5 10 10 12.5 12.5 16 10 12.5 12.5 18 12.5 16 12.5 18 12.5 16 16 18 16 16 18 18 11 11 11 11 11 11 11 11 11 11 15 11.2 11.2 11.2 15 11.5 11.5 12.5 15 12.5 16 20 16 20 15 25 30 20 20 15 30 25 25 15 30 20 35 20 40 25 31.5 25 35.5 40 31.5 35.5 20 45 65 95 90 125 135 145 155 155 215 260 260 260 360 485 485 615 635 615 850 860 850 1030 1150 1200 1610 1480 1480 1610 1610 1832 1832 1900 2215 1835 2285 2420 2590 2235 2700 2610 2790 2845 3000 3100 2.400 1.800 1.300 1.300 2.500 1.300 1.300 1.300 1.300 1.300 0.900 0.600 0.600 0.600 0.400 0.234 0.234 0.162 0.155 0.162 0.119 0.120 0.119 0.090 0.110 0.082 0.060 0.063 0.063 0.080 0.060 0.050 0.050 0.068 0.040 0.048 0.034 0.042 0.030 0.034 0.028 0.029 0.025 0.023 0.025 0.023 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 2000 3000 2000 3000 3000 2000 3000 3000 5000 3000 3000 5000 5000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.50 0.50 0.50 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 2.0 2.0 2.0 2.0 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 2.5 2.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEUFC1H1R0( )✽✽✽ EEUFC1H2R2( ) EEUFC1H3R3( ) EEUFC1H4R7( ) EEUFC1H100( ) EEUFC1H100L( ) EEUFC1H120( ) EEUFC1H150( ) EEUFC1H180( ) EEUFC1H220( ) EEUFC1H270( ) EEUFC1H330( ) EEUFC1H390( ) EEUFC1H470( ) EEUFC1H560( ) EEUFC1H680( ) EEUFC1H820( ) EEUFC1H101( ) EEUFC1H121L( ) EEUFC1H121( ) EEUFC1H151( ) EEUFC1H181L( ) EEUFC1H181( ) EEUFC1H221( ) EEUFC1H221S( ) EEUFC1H271( ) EEUFC1H331L EEUFC1H331( ) EEUFC1H391( ) EEUFC1H391S( ) EEUFC1H471L EEUFC1H471( ) EEUFC1H561( ) EEUFC1H561S( ) EEUFC1H681L EEUFC1H681( ) EEUFC1H821L EEUFC1H821( ) EEUFC1H102L EEUFC1H102( ) EEUFC1H122 EEUFC1H122S( ) EEUFC1H152L EEUFC1H182L EEUFC1H182 EEUFC1H222 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 100 100 200 200 100 100 100 100 100 100 100 100 100 100 100 50 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 250 500 500 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. ✽✽✽ Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 – EEE-70 – Oct. 2013 Aluminum Electrolytic Capacitors/ FC ■ Standard Products Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size Specification Lead Length Ripple Imped- Endur- Lead Lead Space Cap. W.V. (±20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (V) (μF) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm) 6.8 12 18 22 33 39 47 56 68 82 100 120 150 180 220 63 270 330 390 470 560 680 820 1000 1200 1500 1800 4 5 5 6.3 6.3 6.3 8 8 8 10 8 10 10 8 10 12.5 10 10 12.5 16 10 12.5 12.5 18 12.5 16 16 12.5 16 18 12.5 16 18 16 16 16 18 18 18 11 11 15 11.2 11.2 15 11.5 11.5 11.5 12.5 15 12.5 16 20 20 15 20 25 20 15 30 20 25 15 30 20 25 35 25 20 40 31.5 25 31.5 35.5 40 31.5 35.5 40 80 145 200 240 240 330 405 405 405 535 535 535 600 690 885 1020 885 1050 1285 1410 1300 1285 1720 1690 2090 1765 2160 2265 2160 2290 2560 2670 2585 2670 2770 2825 2950 3095 3205 3.500 2.000 1.300 1.000 1.000 0.700 0.342 0.342 0.342 0.256 0.230 0.256 0.194 0.178 0.147 0.150 0.147 0.130 0.085 0.090 0.090 0.085 0.070 0.086 0.055 0.059 0.050 0.047 0.050 0.055 0.042 0.043 0.043 0.043 0.036 0.030 0.032 0.030 0.025 1000 1000 1000 1000 1000 1000 2000 2000 2000 3000 2000 3000 3000 2000 3000 5000 3000 3000 5000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.45 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 2.0 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 5.0 7.5 5.0 7.5 7.5 5.0 7.5 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEUFC1J6R8( ) EEUFC1J120( ) EEUFC1J180( ) EEUFC1J220( ) EEUFC1J330( ) EEUFC1J390( ) EEUFC1J470( ) EEUFC1J560( ) EEUFC1J680( ) EEUFC1J820( ) EEUFC1J101L( ) EEUFC1J101( ) EEUFC1J121( ) EEUFC1J151( ) EEUFC1J181( ) EEUFC1J181S( ) EEUFC1J221X( ) EEUFC1J221( ) EEUFC1J221S( ) EEUFC1J271( ) EEUFC1J331L EEUFC1J331( ) EEUFC1J391( ) EEUFC1J391S( ) EEUFC1J471L EEUFC1J471( ) EEUFC1J561( ) EEUFC1J681L EEUFC1J681( ) EEUFC1J681S( ) EEUFC1J821L EEUFC1J821 EEUFC1J821S( ) EEUFC1J102U EEUFC1J102 EEUFC1J122L EEUFC1J122 EEUFC1J152 EEUFC1J182 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 250 500 500 250 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 – EEE-71 – Oct. 2013 Aluminum Electrolytic Capacitors/ FC ■ Standard Products Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size W.V. Cap. (±20 %) (V) (μF) 5.6 8.2 12 18 22 33 39 56 68 100 100 120 150 180 220 270 330 390 470 560 680 Specification Lead Length Ripple Imped- Endur- Lead Lead Space Current ance ance Dia. Dia. Length Taping Taping (100 kHz) (100 kHz) Straight ✽B ✽H (+105 °C) (+20 °C) (mm) (mm) (mA r.m.s.) (Ω) (hours) (mm) (mm) (mm) (mm) 5 5 6.3 6.3 8 8 10 8 10 10 10 12.5 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 18 16 18 16 18 16 18 18 11 15 11.2 15 11.5 15 12.5 20 16 20 25 15 30 20 15 25 15 30 20 35 25 40 20 31.5 25 35.5 31.5 40 35.5 40 80 90 114 155 260 340 306 455 400 463 599 511 698 671 793 807 917 937 995 1040 1170 1130 1230 1520 1420 1730 1600 1920 1770 2300 4.10 2.80 1.80 1.10 0.680 0.450 0.530 0.330 0.360 0.240 0.210 0.230 0.150 0.180 0.140 0.110 0.120 0.098 0.110 0.087 0.089 0.072 0.080 0.062 0.070 0.053 0.062 0.047 0.041 0.036 1000 1000 1000 1000 2000 2000 3000 2000 3000 3000 3000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 2.0 2.0 2.5 2.5 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEUFC2A5R6( ) EEUFC2A8R2( ) EEUFC2A120( ) EEUFC2A180( ) EEUFC2A220( ) EEUFC2A330L( ) EEUFC2A330( ) EEUFC2A390L( ) EEUFC2A390( ) EEUFC2A560( ) EEUFC2A680L( ) EEUFC2A680( ) EEUFC2A101L EEUFC2A101( ) EEUFC2A121S( ) EEUFC2A151( ) EEUFC2A151S( ) EEUFC2A181L EEUFC2A181( ) EEUFC2A221L EEUFC2A221( ) EEUFC2A271L EEUFC2A271S( ) EEUFC2A331 EEUFC2A331S( ) EEUFC2A391L EEUFC2A391 EEUFC2A471 EEUFC2A561 EEUFC2A681 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 50 100 50 50 2000 2000 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 – EEE-72 – Oct. 2013