Vishay CRCW0603KFNECHP Pulse proof, high power thick film chip resistor Datasheet

CRCW....-HP e3
Vishay
Pulse Proof, High Power Thick Film Chip Resistors
FEATURES
•
•
•
•
•
•
Excellent pulse load capability
Enhanced power rating
Double side printed resistor element
Protective overglaze
Lead (Pb)-free solder contacts on Ni barrier layer
Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compliant to RoHS directive 2002/95/EC
• AEC-Q200, rev. C compliant
STANDARD ELECTRICAL SPECIFICATIONS
SIZE
MODEL
INCH METRIC
CRCW0402-HP e3
0402
1005
CRCW0603-HP e3
0603
1608
CRCW0805-HP e3
0805
2012
CRCW1206-HP e3
1206
3216
CRCW2010-HP e3
2010
5025
CRCW2512-HP e3
2512
6332
POWER RATING
P70
W
LIMITING
ELEMENT
VOLTAGE
MAX. V
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
± 100
± 200
Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 2.5 A
± 100
0.25
75
± 200
Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 4 A
± 100
0.33
150
± 200
Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 5 A
± 100
0.5
200
± 200
Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 6 A
± 100
1.0
400
± 200
Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 10 A
± 100
1.5
500
± 200
Zero-Ohm-Resistor: Rmax. = 0.010 Ω, Imax. = 14 A
0.125 (1)
50
RESISTANCE
RANGE
E-SERIES
Ω
±1
±5
1R to 1M
E24 + E96
E24
±1
±5
1R to 1M
E24 + E96
E24
±1
±5
1R to 1M
E24 + E96
E24
±1
±5
1R to 1M
E24 + E96
E24
±1
±5
1R to 1M
E24 + E96
E24
±1
±5
1R to 1M
E24 + E96
E24
Notes
(1) CRCW0402-HP resistors feature a single side printed resistive layer only
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime
• Marking and packaging: see appropriate catalog or web page
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
TECHNICAL SPECIFICATIONS
PARAMETER
Rated Dissipation P70 (1)
Limiting Element Voltage
Umax. AC/DC
Insulation Voltage Uins. (1 min)
Insulation Resistance
Category Temperature Range
Weight
UNIT CRCW0402-HP CRCW0603-HP CRCW0805-HP CRCW1206-HP CRCW2010-HP CRCW2512-HP
W
0.125
0.25
0.33
0.5
1.0
1.5
V
50
75
150
200
V
Ω
°C
mg
> 75
> 100
> 200
400
500
> 300
> 109
- 55 to + 155
0.65
2
5.5
10
25.5
42
Note
(1) The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
www.vishay.com
1
For technical questions, contact: [email protected]
Document Number: 20043
Revision: 07-May-09
CRCW....-HP e3
Pulse Proof, High Power Thick Film Chip Resistors
Vishay
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: CRCW0603562RFKEAHP (1)
C
R
C
W
MODEL/SIZE
CRCW0402
CRCW0603
CRCW0805
CRCW1206
CRCW2010
CRCW2512
0
6
0
VALUE
R = Decimal
K = Thousand
M = Million
0000 = Jumper
3
5
6
2
TOLERANCE
F=±1%
J=±5%
Z = Jumper
R
F
K
E
A
H
P
TCR
K = ± 100 ppm/K
N = ± 200 ppm/K
0 = Jumper
PACKAGING (2)
EA
EB
EC
ED
EE
EI
EL
EF
EG
EH
SPECIAL
Up to 2 digits
HP = Pulse proof,
High Power
PRODUCT DESCRIPTION: CRCW0603-HP 100 562R 1 % ET1 e3
CRCW0603-HP
100
562R
1%
ET1
e3
MODEL
TCR
RESISTANCE VALUE
TOLERANCE
PACKAGING (2)
LEAD (Pb)-FREE
CRCW0402-HP
CRCW0603-HP
CRCW0805-HP
CRCW1206-HP
CRCW2010-HP
CRCW2512-HP
± 100 ppm/K
± 200 ppm/K
10R = 10 Ω
562R = 562 Ω
10K = 10 kΩ
1M = 1 MΩ
0R0 = Jumper
±1%
±5%
ET1
ET5
ET6
ET7
EF4
EG1
E20
E02
E67
E82
e3 = Pure tin
termination
finish
Notes
(1) Preferred way for ordering products is by use of the PART NUMBER
(2) Please refer to table PACKAGING, see below
PACKAGING
REEL
MODEL
PACKAGING CODE
TAPE
WIDTH
DIAMETER
PITCH
PIECES/
REEL
PART NUMBER
PAPER
CRCW0402-HP
8 mm
180 mm/7"
330 mm/13"
2 mm
2 mm
10 000
50 000
ED
EE
CRCW0603-HP
8 mm
180 mm/7"
285 mm/11.25"
330 mm/13"
4 mm
4 mm
4 mm
5000
10 000
20 000
EA
EB
EC
8 mm
180 mm/7"
285 mm/11.25"
330 mm/13"
4 mm
4 mm
4 mm
5000
10 000
20 000
EA
EB
EC
8 mm
180 mm/7"
285 mm/11.25"
330 mm/13"
4 mm
4 mm
4 mm
5000
10 000
20 000
EA
EB
EC
CRCW0805-HP
CRCW1206-HP
BLISTER
PRODUCT DESC.
PAPER
BLISTER
ET7
EF4
EI
EL
EI
EL
EI
EL
ET1
ET5
ET6
EG1
ET1
ET5
ET6
EG1
ET1
ET5
ET6
EG1
E20
E20
E20
CRCW2010-HP
12 mm
180 mm/7"
4 mm
4000
EF
E02
CRCW2512-HP
12 mm
180 mm/7"
8 mm
4 mm
2000
4000
EG
EH
E67
E82
Document Number: 20043
Revision: 07-May-09
For technical questions, contact: [email protected]
www.vishay.com
2
CRCW....-HP e3
Pulse Proof, High Power Thick Film Chip Resistors
Vishay
DIMENSIONS in millimeters
b
l
a
SOLDER PAD DIMENSIONS
SIZE
RESISTANCE
RANGE
Ω
DIMENSIONS
INCH METRIC
0402
1005
1R - 1M
REFLOW
SOLDERING
WAVE
SOLDERING
a
L
W
H
T1
T2
a
b
l
1.0 ± 0.05
0.5 ± 0.05
0.3 ± 0.1
0.25 ± 0.1
0.2 ± 0.1
0.4
0.6
0.5
b
l
0603
1608
1R - 1M
1.6 ± 0.1
0.85 ± 0.1
0.45 ± 0.1
0.3 ± 0.2
0.3 ± 0.2
0.5
0.9
1.0
0.9
0.9
1.0
0805
2012
1R - 1M
2.0 ± 0.15
1.25 ± 0.15
0.50 ± 0.1
0.4 ± 0.2
0.35 ± 0.2
0.7
1.3
1.2
0.9
1.3
1.3
1206
3216
1R - 1M
3.1 ± 0.2
1.6 ± 0.15
0.50 ± 0.15
0.5 ± 0.2
0.45 ± 0.2
0.9
1.7
2.0
1.1
1.7
2.3
2010
5025
1R - 1M
5.0 ± 0.15
2.5 ± 0.15
0.6 ± 0.1
0.6 ± 0.2
0.6 ± 0.2
1.0
2.5
3.9
1.2
2.5
3.9
2512
6332
1R - 1M
6.3 ± 0.2
3.15 ± 0.15
0.6 ± 0.1
0.6 ± 0.2
0.6 ± 0.2
1.0
3.2
5.2
1.2
3.2
5.2
Pulse Load Pmax. (W)
FUNCTIONAL PERFORMANCE
10 000
2512
2010
1206
0805
0603
0402
1000
100
10
1
0.1
0.01
0.000001 0.00001 0.0001
0.001
0.01
0.1
Single Pulse
100
1
10
Pulse Duration ti (s)
Continuous Pulse Load Pmax. (W)
Maximum pulse dissipation as a function of the pulse duration, single pulse for CRCW...-HP
10 000
2512
2010
1206
0805
0603
0402
1000
100
10
1
0.1
0.01
0.000001 0.00001 0.0001
Continuous Pulse
0.001
0.01
0.1
1
10
100
Pulse Duration ti (s)
Maximum pulse dissipation as a function of the pulse duration, continuous pulse for CRCW...-HP
www.vishay.com
3
For technical questions, contact: [email protected]
Document Number: 20043
Revision: 07-May-09
CRCW....-HP e3
Pulse Proof, High Power Thick Film Chip Resistors
Vishay
Pulse Voltage U max. (V)
2000
2512
1800
1600
2010
1400
1200
1000
800
1206
600
0805
400
0603
200
0
0.00001
0402
0.0001
0.001
0.01
Pulse Voltage
0.1
1
10
Pulse Duration ti (s)
Rated Power in %
Maximum pulse voltage, single and continuous pulses; applicable if P ≤ Pmax.;
for permissible resistance change equivalent to 8000 h operation
120
100
80
60
40
20
0
- 55
Derating
Document Number: 20043
Revision: 07-May-09
- 25
0
25
50
75
70
100
125
155 175
Ambient Temperature in °C
For technical questions, contact: [email protected]
www.vishay.com
4
CRCW....-HP e3
Pulse Proof, High Power Thick Film Chip Resistors
Vishay
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1
TEST
(clause)
REQUIREMENTS
PERMISSIBLE CHANGE
(ΔR)
CONDITIONS OF TEST
STABILITY CLASS 2
OR BETTER
Stability for product types:
1 Ω - 1 MΩ
CRCW....-HP e3
Resistance (4.5)
-
± 1 %, ± 5 %
20/- 55/20 °C and
20/125/20 °C
± 100 ppm/K, ± 200 ppm/K
U = 2.5 x P 70 x R
≤ 2 × Umax.;
Duration: according the style
± (0.5 % R + 0.05 Ω)
Aging 4 h at 155 °C, dryheat
Solder bath method; 235 °C; 2 s
Visual examination
Good tinning (≥ 95 % covered)
no visible damage
Resistance to soldering heat (4.18.2)
Solder bath method;
(260 ± 5) °C; (10 ± 1) s
± (1 % R + 0.05 Ω)
Rapid change of temperature (4.19)
30 min at LCT = - 55 °C;
30 min at UCT = 125 °C; 5 cycles
± (1 % R + 0.05 Ω)
(40 ± 2) °C; 56 days;
(93 ± 3) % RH
± (2 % R + 0.05 Ω)
16 h at UCT = 125 °C; 1 cycle at 55 °C;
2 h at LCT = - 55 °C;
1 h/1 kPa at 15 °C to 35 °C;
5 cycles at 55 °C
U = P 70 x R
U = Umax.; whichever is less severe
± (2 % R + 0.05 Ω)
U = P 70 x R
U = Umax.; whichever is less severe
1.5 h ON; 0.5 h OFF;
70 °C; 1000 h
± (2 % R + 0.05 Ω)
UCT = 155 °C; 1000 h
± (2 % R + 0.05 Ω)
Temperature coefficient (4.8.4.2)
Overload (4.13)
Solderability (4.17.5)
Damp heat, steady state (4.24)
Climatic sequence (4.23)
Endurance at 70 °C (4.25.1)
Endurance at upper category temperature
(4.25.3)
APPLICABLE SPECIFICATIONS
• EN 60115-1
Generic specification
• AEC-Q200
Generic specification
• EN 140400
Sectional specification
• EN 140401-802
Detail specification
• IEC 60068-2-X
Variety of environmental test procedures
• IEC 60286-3
Packaging of SMD components
www.vishay.com
5
For technical questions, contact: [email protected]
Document Number: 20043
Revision: 07-May-09
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages