RoHS Compliant E-Series 4-Way 0° Power Divider 2 – 1000 MHz Features • • • • • • MAPD-007246-ES4700 V1P SM-46 package Surface mount Wide frequency range 4-Way—0° Lead Free RoHS* Compliant and is 2600C reflow compatible. Available on Tape and Reel, reel quantity 2000 Description M/A-COM’s MAPD-007246-ES4700 is a RoHS compliant 4 Way 0° Power Divider in a low cost, surface mount package. Ideally suited for high volume cellular and wireless applications. Parts are packaged in tape & reel. Pin Configuration Orientation Dot Absolute Maximum Ratings 1,2 Pin No. Function Parameter Absolute Maximum 1 Ground Maximum Power Rating 1 Watt 2 Port 1 Internal Load Dissipation 0.125 Watt 3 Input Pin Temperature (10 Sec) 260°C 4 Port 2 5 Ground Operating Temperature 6 Port 3 Storage Temperature 7 Ground 8 Port 4 Operating Temperature 2 -0°C to +70°C -40°C to +85°C -55°C to +125°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. Ordering Information Part Number Package MAPD-007246-ES4700 300 piece reel Note: Reference Application Note M513 for reel size information. This PRELIMINARY Data Sheet contains information regarding a product M/A-COM has under development. Performance is based on measured results and target specifications. Commitment to produce in volume is not guaranteed. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. RoHS Compliant E-Series 4-Way 0° Power Divider 2 – 1000 MHz MAPD-007246-ES4700 V1P Electrical Specifications: TA = 25°C, Z0 = 50Ω 1 Parameter Test Conditions Frequency Units Min Typ Max RF Frequency — 2 - 1000 MHz — — — Insertion Loss FL—fU 2 - 20 20 –500 500 - 1000 dB dB dB — — — 0.5 0.7 0.8 0.8 1.1 1.5 Isolation FL—fU 2 - 20 20 –500 500 - 1000 dB dB dB 20 20 15 35 35 23 — — — Input & Output Return Loss FL—fU 2 - 1000 dB 15.0 — — Amplitude Unbalance FL—fU 2 - 20 20 –500 500 - 1000 dB dB dB — — — — — — 0.1 0.2 0.5 Phase Unbalance FL—fU 2 - 20 20 –500 500 - 1000 Degrees Degrees Degrees — — — — — — 1° 5° 10° 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.