OFM15 15W U l t r a m i n i a ture Open Fram e C las s I I Switch in g Po we r Su p p lie s series Universal 90-264VAC Input Class II Regulated Outputs 3000VAC Isolation Single and Dual Outputs UL60950-1, EN60950-1 & IEC60950-1 Approved 1.89”W x 2.76”L x 1.04”H Model Number Output Voltage Output Amps(max) (pk) Ripple & Noise SINGLE OUTPUT OFM-1500 OFM-1501 OFM-1502 OFM-1503 OFM-1505 3.3 VDC 5 VDC 12 VDC 15VDC 24VDC 3.5A 3A 1.25A 1A 0.63A 3.8A 3.6A 1.5A 1.25A 0.75A 100mV pk-pk max. 100mV pk-pk max. 100mV pk-pk max. 100mV pk-pk max. 240mV pk-pk max. DUAL OUTPUT OFM-1506 OFM-1507 +/-12VDC +/-15VDC +/-0.63A +/-0.5A +/-0.8A +/-0.65A 300mV pk-pk max. 300mV pk-pk max. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 OFM15 15W U l t r a m i n i a ture Open Fram e C las s I I Switch in g Po we r Su p p lie s INPUT SPECIFICATIONS Input Voltage Range Frequency Range Inrush Current, max. Leakage Current GENERAL SPECIFICATIONS 90-264 VAC (100-240VAC nom.) 47-440 Hz (50-60Hz nom.) 20A@100V, 40A@200V Input * <3.5mA @ 240VAC, 50Hz OUTPUT SPECIFICATIONS Voltage and Current Load Regulation (20%-FL) Line Regulation Cross Regulation (Duals) Preset Accuracy DC Voltage Adjust (typ) Temperature Coefficient Ripple/Noise Over Voltage Protection Over Temp. Protection Short Circuit Protection Hold Up Time series See Selection Chart Single: +/- 3%, Duals: +/- 3% Single +/- 0.1~1%, typ Duals +/- 0.3~1%, typ 2% 1% +/- 6% of FS (Primary) +/-0.03%/°C See Selection Chart Clamp, 110-150%; * 3.3V:170-200% * Latching, Cool and Repower Continuous, self-recovering 20mS typ. @ 120VAC Input-Out Isolation Efficiency @ Nom Input Switching Frequency Safety UL/cUL: UL-EU: CE: CB: 3KVAC 75%~78%, typ (68% for 3.3V typ.) 100Khz, (fixed, typical) UL60950-1 2nd ed./ C22.2 60950-1 2nd ed. EN60950-1 2nd ed. EN60601-1-2 IEC60950-1 2nd ed. PHYSICAL SPECIFICATIONS Size Construction Weight 1.89” x 2.76” x 1.04” Open Frame 2.5oz (70g) ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Storage Temperature Relative Humidity EMI MTBF 0 to +50°C (See Derate) -25 to +71°C * 0 to + 95%, non-cond * EN55011 Class A (Mil Std 217, 25°C) 559,000 Hrs All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 OFM15 15W U l t r a m i n i a ture Open Fram e C las s I I Switch in g Po we r Su p p lie s series OUTPUT DERATING CURVE 100 90 80 Load (%) 70 60 50 40 30 20 10 0 0 10 20 30 40 50 70 60 Ambient Temperature °C MECHANICAL DIMENSIONS -VOUT ACN 1.89in 48mm COM +VOUT .945in 24mm .492in 12.5mm ACL .157in 4mm Pin # Single Outputs Dual Outputs 1 2 6 8 9 AC Line AC Neutral + Output NC - Output AC Line AC Neutral +Output Common - Output Length & Width tolerance : .157in 4mm .945in 24mm 1.398in 35.5mm 2.44in 62mm 2.75in 69.9mm .874in 22.2mm max .17in 4.3mm .07in 1.78mm .04in 1.02mm .15in 3.81mm .063in 1.6mm 0.1mm (0.004in ) Pin : 1.0x10.2x0.6 copper core with Ni-plating DRAWING NO. REV OFM1506_D DESCRIPTION A1 Height changes from 25mm to 26.5mm WWW.ASTRODYNETDI.COM DATE SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) 2012/8/3 DIMENSION X<8 2015 8<X<25 25<X<100 100<X<300 300<X<800 UNIT SIZE mm A4 MATERIAL PART NO. 1:1 ASTRODYNE USA: 1-800-823-8082 MODEL NO. ASTRODYNE PACIFIC: OF 886-2-26983458 SCALE PIERCINGBENDING ANGULAR SHEET ±0.1 ±0.15 ±0.3° ±0.5° Projection ±0.1 ±0.2 ±0.5° DRAWN ±0.15 ±0.2 ±0.25 ±0.3 ±1° CHECKED ±0.3 ±0.5 ±1.5° APPROVED TITLE Erica OFM 2D out