GBPC1005 thru GBPC110 Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES • UL recognition file number E54214 • Ideal for printed circuit boards ~ e4 • Typical IR less than 0.1 µA • High surge current capability ~ • High case dielectric strength 1500 VRMS • Solder dip 260 °C, 40 s ~ ~ • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Case Style GBPC1 TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for switching power supply, home appliances, office equipment, industrial automation applications. PRIMARY CHARACTERISTICS IF(AV) 3A VRRM 50 V to 1000 V IFSM 60 A IR 5 µA VF 1.0 V TJ max. 150 °C MECHANICAL DATA Case: GBPC1 Epoxy meets UL 94V-0 flammability rating Terminals: Silver plated leads, solderable per J-STD-002 and JESD22-B102 E4 suffix for consumer grade Polarity: As marked, positive lead by belevled corner Mounting Torque: 10 cm-kg (8.8 inches-lbs) max. Recommended Torque: 5.7 cm-kg (5 inches-lbs) MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) SYMBOL GBPC 1005 GBPC 101 GBPC 102 GBPC 104 GBPC 106 GBPC 108 GBPC 110 Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS bridge input voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V PARAMETER Maximum DC blocking voltage Maximum average forward rectified output current at (1) TC = 60 °C TA = 25 °C (2) Peak forward surge current single sine-wave superimposed on rated load Rating for fusing (t < 8.3 ms) Operating junction and storage temperature range IF(AV) 3.0 2.0 UNIT A IFSM 60 A I2t 15 A 2s TJ, TSTG - 55 to + 150 °C Notes: (1) Unit mounted on 4.0 x 4.0 x 0.11" thick (10.5 x 10.5 x 0.3 cm) aluminum Plate (2) Unit mounted on P.C.B. at 0.375" (9.5 mm) lead length with 0.5 x 0.5" (12 x 12 mm) copper pads Document Number: 88611 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 GBPC1005 thru GBPC110 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) TEST CONDITIONS PARAMETER SYMBOL GBPC 1005 GBPC 101 GBPC 102 GBPC 104 GBPC 106 GBPC 108 GBPC 110 UNIT Maximum instantaneous forward voltage drop per diode 1.5 A VF 1.0 V Maximum DC reverse current at rated DC blocking voltage per diode TA = 25 °C TA = 125 °C IR 5.0 500 µA Typical junction capacitance per diode 4.0 V, 1 MHz CJ 21 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL GBPC 1005 GBPC 101 GBPC 102 RθJA RθJC Typical thermal resistance (1) GBPC 104 GBPC 106 GBPC 108 GBPC 110 12 8.0 UNIT °C/W Note: (1) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 2.5 51 100 Paper box GBPC106-E4/51 RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 60 Case Temperature, TC Heatsink Mounting 4.0 x 4.0 x 0.11" Thk. (10.5 x 10.5 x 0.3 cm) Al. Plate 60 Hz Resistive or Inductive Load 4.0 3.0 Peak Forward Surge Current (A) Average Forward Output Current (A) 5.0 2.0 1.0 Ambient Temperature, TA P.C.B. Mounting 0.375" (9.5 mm) Lead Length 0 0 50 TC = 60 °C Single Sine-Wave 50 40 30 20 10 1.0 Cycle 0 100 150 1 100 10 Ambient Temperature (°C) Number of Cycles at 60 Hz Figure 1. Derating Curve Output Rectified Current Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88611 Revision: 15-Apr-08 GBPC1005 thru GBPC110 Vishay General Semiconductor 100 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 1 0.1 0.01 0.4 0.6 0.8 1.2 1.0 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 10 Transient Thermal Impedance (°C/W) 100 Instantaneous Reverse Current (µA) 10 1 0.1 1.6 1.4 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = 125 °C 1 0.1 TJ = 25 °C 20 40 60 80 1 0.1 0.01 0.01 0 10 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Heating Time (s) Figure 4. Typical Reverse Leakage Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style GBPC1 Hole For #6 Screw 0.158 (4.01) DIA. 0.142 (3.61) 0.630 (16.00) 0.590 (14.98) 0.445 (11.30) 0.405 (10.29) AC 0.630 (16.00) 0.590 (14.98) 0.445 (11.30) 0.405 (10.29) AC 0.128 (3.25) 0.048 (1.22) 0.094 (2.4) x 45° 0.040 (1.02) TYP. 0.032 (0.81) DIA. 0.028 (0.71) 0.750 (19.05) MIN. 0.200 (5.08) 0.160 (4.06) Polarity shown on side of case: Positive lead by beveled corner Document Number: 88611 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1