Miniature Slides Series MS Distinctive Characteristics Available in flat frame and bracketed PC mounting types. Over-center actuator block and plunger design gives crisp actuation with clear indication of circuit status; this design also diminishes sparking and increases operating life. Guide interlocked with actuator block prevents window locking and maintains correct plunger alignment to assure contact stability. Antijamming design protects contacts from damage due to excessive downward force on the actuator. High internal barriers between poles and insulating sheet between case and actuator block give added protection to contacts. Specially composed silver alloy contacts for power applications or gold contacts for logic level applications give high contact reliability. Prominent external insulating barriers increase insulation resistance and dielectric strength. Epoxy sealed terminals prevent entry of flux, solvents, and other contaminants. Clinching of frame to case well above base and terminals provides 1,500V dielectric strength. Actual Size NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS General Specifications Electrical Capacity (Resistive Load) Power Level (code W): Logic Level (code G): Logic/Power Level (code A): Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Contact Timing: Total Travel: Materials & Finishes Actuator: Frame: Dust Cover: Case: Movable Contacts: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Processing Soldering: Cleaning: Standards & Certifications Flammability Standards: UL Recognized: C-UL Recognized: R CSA Certified: 6A @ 125V AC or 3A @ 250V AC 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Combines W & G ratings Note: Find additional explanation of dual rating & operating range in Supplement section. 10 milliohms maximum for silver; 20 milliohms maximum for gold 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 100,000 operations minimum 25,000 operations minimum for silver; 50,000 operations minimum for gold Nonshorting (break-before-make) On-None-On circuit .087” (2.2mm); all other circuits .138” (3.5mm) Glass fiber reinforced polyester Stainless steel for panel & PCB mount; phosphor bronze with tin plating for bracket mount Phosphor bronze with nickel plating Glass fiber reinforced diallyl phthalate resin (UL94V-0) Silver alloy (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Silver capped copper with silver plating (code W); copper with gold plating (code G); or silver alloy with gold plating (code A) Copper or brass with silver or gold plating –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Wave Soldering recommended (PC Mount). See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. These devices are not process sealed. Hand clean locally using alcohol based solution. UL94V-0 rated case All Single & Double Pole Double Throw models recognized at 6A @ 125V AC & 3A @ 250V AC; UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch. All Single & Double Pole Double Throw models recognized at 6A @ 125V AC & 3A @ 250V AC; UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch. All Double Throw & 3 Throw models certified at 6A @ 125V AC, 3A @ 250V AC, & 0.4VA maximum @ 28V DC; CSA File No. 023535-0-000; add “/C” to end of part number to order CSA mark on switch. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS TYPICAL SWITCH ORDERING EXAMPLE 1 MS A 2 S G POLES 30 TERMINALS 1 SPDT 2 DPDT SP3T CIRCUITS 2 ON NONE ON 3 ON OFF ON 0 ON ON ON MOUNTING 01 Solder Lug F Panel Mount (Terminal 01 only) 03 Straight PC 13 Straight with Bracket N PCB Mount (Terminal 03 only) 30 Right Angle PC 40 Vertical PC S Bracket Mount (Terminals 13, 30, & 40 only) CONTACT MATERIALS & RATINGS ACTUATORS A .150” (3.8mm) Wide for Single or Double Pole B .323” (8.2mm) Wide for Double Pole W Silver; Rated 6A @ 125V AC & 3A @ 250V AC G Gold; Rated 0.4VA max. @ 28V AC/DC max. A Gold over Silver; Rated 6A @ 125V AC & 0.4VA max. @ 28V AC/DC max. IMPORTANT: Switches are supplied without UL, C-UL & CSA markings unless specified. Specific models & ratings are noted on General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE MS12ASG30 .150” (3.8mm) Wide Actuator SPDT ON-NONE-ON Circuit Gold Contacts with 0.4VA Rating Right Angle PC Terminals with Support Bracket NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS POLES & CIRCUITS Slide Position Pole SP DP Connected Terminals Left Center Right MS12 ON NONE ON MS13 ON OFF ON MS22 ON NONE ON MS23 ON OFF ON Throw & Schematics Left Center Right 2-1 OPEN 2-3 Note: Terminal numbers are not actually on the switch. Model 2 (COM) SPDT 1 2-1 5-4 OPEN 2-3 5-6 2 DPDT 1 3 (COM) 3 5 6 4 For 3 Throw (3-On) Connected Terminals & Schematics Pole SP Model MS20 Left Center Right ON ON ON External Connection 5 2 (in) 3 4 (out) 6 (out) 1 (out) External Connection 5 2 (in) 1 (out) 2-1 5-4 External Connection The SP3T model utilizes a double pole base. External Connection 5 2 (in) 3 4 (out) 6 (out) 1 (out) 2-3 5-4 (out) 3 4 (out) 6 (out) 2-3 5-6 External connections must be made during field installation. External Conn 6 3 5 2 4 1 (out) Common (in) (out) ACTUATORS A .150” (3.8mm) Wide for Single Pole (3.8) .150 .150” (3.8mm) Wide for Double Pole (3.8) .150 (3.8) .150 B .323” (8.2mm) Wide for Double Pole Only (3.8) .150 (3.8) .150 (8.2) .323 CONTACT MATERIALS & RATINGS W Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC G Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Note: Complete explanation of operating range in Supplement section. A Gold over Silver Power Level or Logic Level 6A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section for complete explanation of dual rating and operating range. NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Miniature Slides Series MS MOUNTING TYPES & TERMINALS F (2.4) Dia Typ .094 (2.4) Dia Typ .094 Panel Mount (Combines with Solder Lug Terminal 01 only) A A (4.19) .165 Straight PC Mount (Combines with Straight PC Terminal 03 only) (9.0) .354 SP or DP with .150” (3.8mm) Actuator Maximum Panel Thickness: .197” (5.0mm) S (17.53) .690 (17.53) .690 Dimension A = .268” (6.8mm) for on-none-on .319” (8.1mm) for on-off-on & on-on-on N DP only with .323” (8.2mm) Actuator Support Bracket Mount (For Terminals 13, 30, & 40) Maximum Panel Thickness: For Straight PC with Bracket Terminal 13: .197” (5.0mm) For Angle Mount Terminals 30 & 40: .177” (4.5mm) 01 03 Solder Lug Epoxy Seal Straight PC (4.0) .157 Epoxy Seal (2.0) .079 (2.0) (1.1) .079 .043 Thk = (0.8) .031 (6.35) (4.8) .250 .189 (1.17) .046 Thk = (0.8) .031 13 Straight PC with Bracket 30 Right Angle PC 40 Vertical PC TYPICAL SWITCH DIMENSIONS Solder Lug Terminals Single Pole (1.1) x (2.0) Typ .043 x .079 (1.2) R Typ .047 (0.8) Typ .031 ON (3.8) Sq .150 (19.6) .772 (6.1) .240 (6.6) .260 MS12AFW01 3 (12.7) .500 2 (4.7) Typ .185 ON (17.53) .690 (0.4) .016 (5.1) (6.4) (4.5) .201 .252 .177 1 (0.5) .020 (0.5) .020 (2.0) .079 Actuator in LEFT Position Solder Lug Terminals Double Pole (1.2) R Typ .047 (1.2) R Typ .047 (1.1) x (2.0) Typ .043 x .079 (2.0) Typ .079 (17.53) .690 (19.6) .772 (3.8) .150 (6.1) .240 MS22BFW01 ON (0.8) Typ .031 (3.8) .150 (6.1) .240 (8.2) .323 ON (17.53) .690 (19.6) .772 (5.1) .201 (4.7) Typ .185 (0.5) (0.4) .020 .016 (7.6) (4.5) .299 .177 6 3 5 2 4 1 (4.8) .189 (11.4) .449 (12.7) .500 (0.5) .020 Actuator in LEFT Position NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Series MS Miniature Slides TYPICAL SWITCH DIMENSIONS Straight PC Terminals Single Pole (0.8) Typ .031 3 ON 3 ON (4.7) Typ .185 Actuator in LEFT Position Straight PC Terminals Double Pole ON 6 ON (4.7) Typ .185 (4.8) .189 (1.17) Typ .046 (0.8) Typ .031 (3.8) .150 (1.8) Dia Typ .073 (0.5) .020 (1.17) .046 MS12ANG03 (4.7) Typ .185 1 1 (4.8) .189 (5.1) (6.4) (6.35) .201 .252 .250 (6.6) .260 2 (12.7) .500 2 (3.8) Sq .150 3 6 2 5 1 4 3 5 2 4 1 (12.7) .500 (4.7) Typ .185 (1.8) Dia Typ .073 (8.2) .323 (3.8) .150 MS22BNG03 (5.1) .201 (7.6) .299 (4.8) .189 (11.4) .449 (4.8) .189 (6.35) .250 Actuator in LEFT Position Straight PC Terminals with Bracket Single Pole (3.8) .150 ON (4.8) .189 (0.4) Typ .016 (3.2) .126 (1.2) Typ .047 3 (12.7) .500 2 (6.7) .264 (13.1) .516 (5.1) .201 Actuator in LEFT Position Straight PC Terminals with Bracket Double Pole (3.8) .150 (8.2) .323 ON (4.8) .189 (0.8) Typ .031 (15.8) (4.7) Typ .622 .185 ON (3.8) .150 (0.4) Typ .016 (0.36) .014 (10.4) .409 (10.4) .409 (5.1) .201 (6.7) .264 (14.3) .563 (3.2) .126 (1.8) Dia Typ .073 (1.5) Dia Typ .059 (0.5) .020 (1.17) .046 (1.6) Typ .063 (2.4) Typ .095 (1.2) Typ .047 6 3 5 2 4 1 (1.17) Typ .046 (4.7) Typ .185 1 (7.1) .280 MS12ASG13 (7.9) Typ .311 2 1 (0.36) .014 (5.6) .220 (1.6) Typ .063 3 (0.8) Typ .031 (15.8) (4.7) Typ .622 .185 ON (3.8) .150 MS22BSG13 (0.5) .020 (12.7) .500 (0.5) .020 (4.8) .189 (11.9) .469 3 6 2 5 1 4 CL (7.9) Typ .311 (4.7) Typ .185 (1.8) Dia Typ .073 (1.5) Dia Typ .059 Actuator in LEFT Position NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Series MS Miniature Slides TYPICAL SWITCH DIMENSIONS Right Angle PC Terminals Single Pole (5.1) .201 (12.7) .500 1 (3.8) Sq .150 (0.4) Typ .016 MS12ASG30 (1.2) .047 (9.53) .375 (1.27) .050 (1.8) Dia Typ .073 (4.7) Typ .185 3 (6.6) .260 (3.2) (3.81) .126 .150 (5.7) .224 (13.2) .520 2 3 2 1 (9.53) .375 (0.5) .020 (0.8) Typ .031 (4.7) Typ .185 (6.6) Typ .260 (1.5) Dia Typ .059 Actuator in LEFT Position Right Angle PC Terminals Double Pole (3.8) .150 (5.1) .201 (3.8) .150 (12.7) .500 4 5 6 6 (8.2) .323 (3.8) .150 (0.4) Typ .016 (0.4) Typ .016 (13.2) .520 (6.2) .245 (1.2) .047 (12.7) .500 (5.7) .224 (13.2) .520 MS22BSG30 (11.4) .449 (3.2) .126 (0.5) .020 1 2 (1.27) Typ .050 (3.81) .150 (1.8) Dia Typ .073 (4.7) Typ .185 5 4 2 3 (3.81) .150 1 (12.7) .500 3 (0.8) Typ .031 (4.7) Typ .185 (1.5) Dia Typ .059 (6.6) Typ .260 Actuator in LEFT Position Vertical PC Terminals Single Pole (5.1) .201 (1.8) Dia Typ .073 3 ON 3 (12.7) .500 2 (6.9) .270 ON (3.8) Sq .150 (3.81) Typ .150 2 1 1 (10.16) .400 (1.2) Typ .047 (4.45) .175 (0.4) .016 (10.16) .400 (5.3) .209 MS12ASG40 (0.8) Typ (2.7) .031 .106 (3.81) Typ .150 (4.45) Typ .175 (1.5) Dia Typ .059 Actuator in LEFT Position Vertical PC Terminals Double Pole (8.2) .323 (5.1) .201 (11.4) .449 ON (3.8) .150 (1.2) Typ .047 (4.45) .175 (1.2) Typ .047 (4.45) .175 (6.9) .270 ON (3.8) .150 MS22BSG40 (6.6) .260 (1.27) .050 (0.5) .020 (5.3) .209 (0.4) .016 (12.7) .500 (0.8) Typ (2.7) .031 .106 (3.81) Typ .150 (0.5) .020 6 3 5 2 4 1 3 (12.7) .500 (1.8) Dia Typ .073 (4.8) .189 6 2 5 1 4 (12.7) .500 (1.27) Typ .050 (4.8) .189 (3.81) Typ .150 (4.45) Typ .175 (1.5) Dia Typ .059 Actuator in LEFT Position NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07