3.0x2.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: AA3020RWC/A WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic Features glove when handling the LEDs. 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM All devices, equipment and machinery must be electrically SPACE REQUIRED. grounded. SUITABLE FOR COMPACT OPTOELECTRONIC Applications APPLICATIONS. LOW POWER CONSUMPTION. traffic signaling. PACKAGE : 2000PCS / REEL. backlighting (illuminated advertising , general lighting). MOISTURE SENSITIVITY LEVEL : LEVEL 4. interior and exterior automotive lighting. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. substitution of micro incandescent lamps. TYP. COLOR TEMPERATURE:6500K reading lamps. COLOR COORDINATES:X=0.33,Y=0.34 ACC. TO signal and symbol luminaire for orientation. CIE1931(WHITE). marker lights (e.g. steps, exit ways, etc). OPTICAL EFFICIENCY:9.5 lm/W(TYP.) decorative and entertainment lighting. COLOR REPRODUCTION INDEX:80. indoor and outdoor commercial and residential RoHS COMPLIANT. architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAG3658 REV NO: V.4 DATE: MAY/22/2006 PAGE: 1 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201001589 Selection Guide Note2 Part No. Dice AA3020RWC/A Lens Type WHITE (InGaN) Note3 luminous Intensity Iv(mcd) @ 20 mA WATER CLEAR v (mlm) @ 20 mA Viewing Note1 Angle Min. Typ. Typ. 2θ θ1/2 70 125 630 90° Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 114 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 300 140 °C/W °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥16 mm2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Value Unit Note1 0.33 - Note1 0.34 - Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage 2.7 VF Note2 IF=20mA [Max.] Reverse Current (VR=5V) [Typ.] Reverse Current (VR=5V) [Max.] 3.3 V 3.8 0.01 IR 10 µA Temperature coefficient of x [Typ.] IF=20mA, -10°C T 100°C TC x -0.1 10-3 / °C Temperature coefficient of y [Typ.] IF=20mA, -10°C T 100°C TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C T 100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ± 0.1V. SPEC NO: DSAG3658 REV NO: V.4 DATE: MAY/22/2006 PAGE: 2 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201001589 Brightness codes Note1 Note2 luminous Intensity Iv(mcd) @ 20mA v (mlm) @ 20mA Code. Min. Max. Typ. M 70 130 480 N 110 220 710 P 180 320 960 Q 280 420 1270 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White AA3020RWC/A SPEC NO: DSAG3658 REV NO: V.4 DATE: MAY/22/2006 PAGE: 3 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201001589 White AA3020RWC/A SPEC NO: DSAG3658 REV NO: V.4 DATE: MAY/22/2006 PAGE: 4 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201001589 Color Codes AA3020RWC/A SPEC NO: DSAG3658 REV NO: V.4 DATE: MAY/22/2006 PAGE: 5 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201001589 AA3020RWC/A Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAG3658 REV NO: V.4 DATE: MAY/22/2006 PAGE: 6 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201001589 PACKING & LABEL SPECIFICATIONS AA3020RWC/A SPEC NO: DSAG3658 REV NO: V.4 DATE: MAY/22/2006 PAGE: 7 OF 7 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP: 1201001589