HF (High Function) Type [1-Channel (Form A) Type] PhotoMOS RELAYS FEATURES 8.8±0.05 .346±.002 6.4±0.05 .252±.002 3.9±0.2 .154±.008 6.4±0.05 .252±.002 8.8±0.05 .346±.002 3.6±0.2 .142±.008 mm inch 1 6 1 6 2 5 2 5 3 4 3 4 (AQV10 series) (AQV20 series) 1. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 2. Control with low-level input signals 3. Controls various types of loads such as relays, motors, lamps and solenoids. 4. Optical coupling for extremely high isolation Unlike mechanical relays, the PhotoMOS relay combines LED and optoelectronic device to transfer signals using light for extremely high isolation. 5. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 6. Stable on resistance 7. Low-level off state leakage current 8. Eliminates the need for a power supply to drive the power MOSFET A power supply used to drive the power MOSFET is unnecessary because of the built-in optoelectronic device. This results in easy circuit design and small PC board area. 9. Low thermal electromotive force (Approx. 1 µV) TYPICAL APPLICATIONS • High-speed inspection machines • Telephone equipment • Data communication equipment • Computer TYPES 1. DC type (AQV10 types) Part No. Output rating* Load voltage Load current 40 V 60 V 250 V 400 V 700 mA 600 mA 300 mA 180 mA Through hole terminal Surface-mount terminal Tube packing style AQV101 AQV102 AQV103 AQV104 AQV101A AQV102A AQV103A AQV104A Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side AQV101AX AQV101AZ AQV102AX AQV102AZ AQV103AX AQV103AZ AQV104AX AQV104AZ Packing quantity Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. 2. AC/DC type (AQV20 types) Part No. Output rating* Load voltage Load current 40 V 60 V 250 V 400 V 500 mA 400 mA 200 mA 150 mA Through hole terminal Surface-mount terminal Tube packing style AQV201 AQV202 AQV203 AQV204 AQV201A AQV202A AQV203A AQV204A Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side AQV201AX AQV201AZ AQV202AX AQV202AZ AQV203AX AQV203AZ AQV204AX AQV204AZ *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. 184 Packing quantity Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs AQV10❍, 20❍ RATING 1. DC type (AQV10 types) 1) Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current Symbol AQV101(A) AQV102(A) AQV103(A) AQV104(A) Remarks IF 50 mA VR 6V IFP 1A f = 100 Hz, Duty factor = 0.1% Pin 150 mW VL 40 V 60 V 250 V 400 V IL 0.7 A 0.6 A 0.3 A 0.18 A 1.8 A 1.5 A 0.6 A 0.5 A 100 ms (1 shot) Ipeak Pout 360 mW PT 410 mW Viso 1,500 V (AC) Non-condensing at low Topr –40°C to +85°C –40°F to +185°F temperatures –40°C to +100°C –40°F to +212°F Tstg LED reverse voltage Peak forward current Power dissipation Load voltage (DC) Continuous load current (DC) Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Input Temperature limits Operating Storage 2) Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol AQV101(A) AQV102(A) AQV103(A) AQV104(A) LED operate current Input LED turn off current LED dropout voltage Typical Maximum Minimum Typical Typical Maximum IFon IFoff VF Typical On resistance Ron Maximum Output Off state leakage current Switching speed Transfer characteristics Turn on time* Turn off time* I/O capacitance Initial I/O isolation resistance Maximum Typical Maximum Typical Maximum Typical Maximum Minimum Note: Recommendable LED forward current IF= 10 mA. 2.3 mA 5 mA 0.8 mA 2.2 mA 2.3 V 3V Ton Toff Ciso Riso IL = Max. IL = Max. IF = 10 mA 0.3 Ω 0.37 Ω 2.7 Ω 6.3 Ω 0.5 Ω 0.7 Ω 4Ω 8Ω 1 µA — 0.23 ms 0.22 ms IF = 10 mA IL = Max. Within 1 s on time IF = 0, VL = Max. 0.13 ms 0.09 ms IF = 10 mA IL = Max. 0.07 ms 1 ms 1.3 pF 3 pF 0.08 ms IF = 10 mA IL = Max. 1 ms 0.07 ms Condition 0.07 ms 1,000 MΩ f = 1 MHz 500 V DC For type of connection, see page 31. *Turn on/Turn off time Input 90% Output 10% Ton Toff 185 AQV10❍, 20❍ 2. AC/DC type (AQV20 types) 1) Absolute maximum ratings (Ambient temperature: 25°C 77°F) Type of Symbol connec- AQV201(A) AQV202(A) AQV203(A) AQV204(A) Remarks tion LED forward current IF 50 mA LED reverse voltage VR 6V Input Peak forward current IFP 1A f = 100 Hz, Duty factor = 0.1% Power dissipation Pin 150 mW Load voltage (peak AC) VL 40 V 60 V 250 V 400 V A 0.5 A 0.4 A 0.2 A 0.15 A A connection: Peak AC, DC B 0.7 A 0.6 A 0.3 A 0.18 A Continuous load current IL B, C connection: DC Output C 1.0 A 0.8 A 0.4 A 0.25 A A connection 100 ms (1 shot) Peak load current Ipeak 1.8 A 1.5 A 0.6 A 0.5 A VL = DC Power dissipation Pout 360 mW Total power dissipation PT 410 mW I/O isolation voltage Viso 1,500 V AC Non-condensing at low Operating Topr –40°C to +85°C –40°F to +185°F Temperature temperature limits Storage Tstg –40°C to +100°C –40°F to +212°F Item 2) Electrical characteristics (Ambient temperature: 25°C 77°F) Item LED operate current Input LED turn off current LED dropout voltage Typical Maximum Minimum Typical Typical Maximum Typical Maximum Typical On resistance Maximum Output Type of Symbol connec- AQV201(A) AQV202(A) AQV203(A) AQV204(A) Remarks tion 2.4 mA IFon — IL = Max. 5 mA 0.8 mA IFoff — IL = Max. 2.2 mA 2.3 V VF — IF = 10 mA 3V IF = 10 mA 0.6 Ω 0.74 Ω 5.5 Ω 12.4 Ω IL = Max. Ron A 1Ω 1.4 Ω 8Ω 16 Ω Within 1 s on time I F = 10 mA 0.3 Ω 0.37 Ω 2.7 Ω 6.2 Ω Ron B IL = Max. 0.5 Ω 0.7 Ω 4Ω 8Ω Within 1 s on time Typical Ron C — — Ton — Toff — Ciso — Riso — Maximum Off state leakage current Switching speed Transfer characteristics Turn on time* Turn off time* I/O capacitance Initial I/O isolation resistance Maximum Typical Maximum Typical Maximum Typical Maximum Minimum Note: Recommendable LED forward current IF= 10 mA. 0.15 Ω 0.18 Ω 1.4 Ω 3.1 Ω 0.25 Ω 0.35 Ω 2Ω 4Ω 1 µA 0.38 ms 0.41 ms IF = 0, VL = Max. 0.21 ms 0.18 ms IF = 10 mA IL = Max. 0.07 ms 1 ms 1.3 pF 3 pF 0.07 ms IF = 10 mA IL = Max. 1 ms 0.08 ms IF = 10 mA IL = Max. Within 1 s on time 0.08 ms 1,000 MΩ f = 1 MHz 500 V DC For type of connection, see page 31. *Turn on/Turn off time Input 90% Output 10% Ton Toff ■ For Dimensions, see Page 27. ■ For Schematic and Wiring Diagrams, see Page 31. ■ For Cautions for Use, see Page 36. 186 AQV10❍, 20❍ REFERENCE DATA 1.-(1) Load current vs. ambient temperature characteristics (DC type) 1.-(2) Load current vs. ambient temperature characteristics (AC/DC type) 2.-(1) On resistance vs. ambient temperature characteristics (DC type: AQV101, AQV102) Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Type of connection: A LED current: 10 mA; Continuous load current: Max. (DC) 0.8 0.8 AQV101(A) 0.5 0.4 AQV103(A) 0.3 0.6 AQV201(A) 0.5 AQV202(A) 0.4 0.8 AQV102 0.6 0.4 0.3 AQV104(A) 0.2 On resistance, Ω AQV102(A) 0.6 1.0 0.7 Load current, A Load current, A 0.7 AQV101 AQV203(A) 0.2 0.2 0.1 0.1 0 0 –40 –20 20 40 60 8085 100 Ambient temperature, °C 2.-(2) On resistance vs. ambient temperature characteristics (DC type: AQV103, AQV104) LED current: 10 mA; Continuous load current: Max. (DC) 0 20 40 60 8085 Ambient temperature, °C Measured portion: between terminals 4 and 6; LED current: 10 mA; Continuous load current: Max. (DC) Measured portion: between terminals 4 and 6; LED current: 10 mA; Continuous load current: Max. (DC) On resistance, Ω On resistance, Ω –40 –20 2.-(4) On resistance vs. ambient temperature characteristics (AC/DC type: AQV203, AQV204) AQV104 8 6 4 AQV103 2 –40 –20 0 20 40 60 8085100 Ambient temperature, °C 2.-(3) On resistance vs. ambient temperature characteristics (AC/DC type: AQV201, AQV202) 10 0 0 2.0 20 1.8 18 1.6 16 1.4 1.2 AQV202 1.0 0.8 On resistance, Ω 0 –40 –20 AQV204(A) 12 10 AQV201 8 0.6 6 0.4 4 0.2 2 0 0 20 40 60 8085 Ambient temperature, °C –40 –20 AQV204 14 0 0 20 40 60 8085 Ambient temperature, °C AQV203 –40 –20 0 20 40 60 8085 Ambient temperature, °C 3.-(1) Turn on time vs. ambient temperature characteristics (DC type) 3.-(2) Turn on time vs. ambient temperature characteristics (AC/DC type) 4.-(1) Turn off time vs. ambient temperature characteristics (DC type) LED current: 10 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 10 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 10 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) AQV202 AQV201 0.6 0.5 AQV102 AQV101 0.4 0.3 AQV103 AQV104 0.2 0.1 0.6 0.5 0.4 AQV203 AQV204 0.3 0.2 0.4 Turn off time, ms 0.7 Turn on time, ms Turn on time, ms 0.7 0.3 0.2 AQV101,AQV102 AQV104 0.1 0.1 AQV103 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 5.-(2) LED operate/turn off current vs. ambient temperature characteristics (AC/DC type) LED current: 10 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Turn off time, ms 0.4 0.3 0.2 AQV204 AQV201, AQV202 AQV203 0.1 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 5 4 AQV104 AQV103 3 AQV101 AQV102 2 1 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C LED operate/turn off current, mA 5.-(1) LED operate/turn off current vs. ambient temperature characteristics (DC type) LED operate/turn off current, mA 4.-(2) Turn off time vs. ambient temperature characteristics (AC/DC type) 5 4 AQV204 AQV203 3 AQV202 AQV201 2 1 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 187 AQV10❍, 20❍ 6. LED dropout voltage vs. ambient temperature characteristics 7.-(1) Voltage vs. current characteristics of output at MOS portion (DC type) 7.-(2) Voltage vs. current characteristics of output at MOS portion (AC/DC type) Sample: AQV202 LED current: 10 to 50 mA Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F Current, A LED dropout voltage, V 50mA 40mA 30mA 20mA 2.5 10mA 0.6 AQV101 AQV102 Current, mA 0.7 0.6 0.5 0.4 0.3 0.2 0.1 –1.0 –0.8–0.6–0.4–0.2 3.0 AQV103 –40 –20 0.4 0.3 AQV201 AQV202 AQV203 0.2 0.1 –2.0 –1.8 –1.6–1.2–0.8 –0.4 AQV104 0.2 0.4 0.6 0.8 1.0 –0.1 Voltage, V –0.2 –0.3 –0.4 –0.5 –0.6 –0.7 2.0 0.5 AQV204 0.4 0.8 1.2 1.6 1.8 2.0 –0.1 Voltage, V –0.2 –0.3 –0.4 –0.5 –0.6 0 20 40 60 8085100 Ambient temperature, °C 8. Off state leakage current Sample: AQV204; Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 9.-(1) LED forward current vs. turn on time characteristics (DC type) 9.-(2) LED forward current vs. turn on time characteristics (AC/DC type) Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 0.5 10–6 10–9 1.0 Turn on time, ms Turn on time, ms Off state leakage current, A 0.6 10–3 0.4 0.3 0.2 0.1 10–12 0 20 40 60 80 Load voltage, V 0 100 10 AQV102 AQV101 AQV103 AQV104 20 30 40 50 LED forward current, mA 0.8 0.6 0.4 0.2 0 10 AQV202 AQV201 AQV203 AQV204 20 30 40 50 LED forward current, mA 10.-(1) LED forward current vs. turn off time characteristics (DC type) 10.-(2) LED forward current vs. turn off time characteristics (AC/DC type) 11.-(1) Applied voltage vs. output capacitance characteristics (DC type) Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Frequency: 1 MHz; Ambient temperature: 25°C 77°F 700 0.12 AQV102 AQV104 AQV101 0.08 AQV103 0.04 0.12 AQV204 AQV201 AQV202 AQV203 0.08 Output capacitance, pF 0.16 Turn on time, ms Turn on time, ms 0.16 600 500 400 300 200 0.04 AQV101,102 100 AQV103,104 0 10 20 30 40 50 LED forward current, mA 0 10 20 30 40 50 LED forward current, mA 0 10 20 30 40 50 Applied voltage, V 11.-(2) Applied voltage vs. output capacitance characteristics (AC/DC type) Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25°C 77°F Output capacitance, pF 700 600 500 400 300 200 AQV201,202 AQV203,204 100 0 5/7/2001 188 10 20 30 40 50 Applied voltage, V All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. Go To Online Catalog