ETC1 CMO5CMC 5v 5x7mm surface mount crystal clock oscillator Datasheet

CMO5 Series
5V 5x7mm Surface Mount Crystal Clock Oscillators
Œ
Œ
Œ
Œ
TTL/CMOS Compatible
Tri-State Feature for Auto Test Systems
Tape & Reel Packaging
±20ppm Available - Please Contact Factory
E L E C T R I C A L S P E C I F I C AT I O N S
MODEL
CMO5
Frequency Range (MHz)
1.5 to 156.250
Frequency Stability (ppm)
Overall (Typical)
Inclusive of calibration, temperature, voltage, load, shock,vibration, aging
0°C to 70°C
±25
-40°C to +85°C
±50
Temperature Range (°C)
Operating
-40°C to +85°C
Storage
-40°C to +125°C
Supply Voltage (V)
Input Current (mA)
+5.0 ±10%
1.5MHz to 30MHz
>30MHz to 50MHz
<10
<30
<50
Symmetry (%) TTL/CMOS
Transistion Times
>50MHz to 156.250MHz
45/55
1.5MHz to 50MHz
>50MHz to 156.250MHz
Rise Time (ns)
<5
<3
Fall Time (ns)
<5
<3
Load
10TTL/15pF
“0” Level (VOL)
“1” Level (VOH)
0.5V
2.4V/4.5V
Start up Time (ms)
<10
PA R T N U M B E R I N G G U I D E
CMO5XXXX - Specify Frequency
“C” = CMOS
“T” = TTL
“Blank” = 0oC to 70oC Operating Temp.
“M” = -40oC to 85oC Operating Temp.
“A” = ±25ppm (-40oC to 85oC Excluding Aging)
“B” = ±50ppm
“C” = ±100ppm
“D” = ±20ppm Excluding Aging (Contact Factory)
“Blank” = Fixed Frequency
“E” = Tri-State
2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585
800-888-1499 or www.champtech.com
1
CMO5 Series
5V 5x7mm Surface Mount Crystal Clock Oscillators
PIN
OUTPUT WAVEFORM
FUNCTION
1
N/C / Tri-State
2
Ground
3
Output
4
+ VCC
TEST CIRCUIT DIAGRAM
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
TEST METHODS
REFERENCE PROCEDURES
DESCRIPTION
Temperature Cycle
MIL-STD-833, Mtd 1010, Cond. B
-55°C to +125°C; Air-to-Air; 100 cycles; 10
min. dwell
Mechanical Shock
MIL-STD-883, Mtd 2002, Cond. B
1500 g’s
Vibration
MIL-STD 883, Mtd 2007, Cond. B
20-2000 Hz; 0.06 inch; 15g’s; 3 planes
Humidity Steady State
MIL-STD-202, Mtd 103
40°C; 90%-95% R.H.; 56 days
Thermal Shock
MIL-STD-883, Mtd 1011.7 Cond. B
100°C to 0°C; Water-to-Water; 15 cycles
Electrostatic Discharge
MIL-STD-883, Mtd 3015 Class II
2 KV to 4 KV Threshold
Solderability
Hermeticity
MIL-STD-883, Mtd 2022.2
MIL-STD-883, Mtd 1014.8, Cond. A1
Solder dip; Meniscograph Criteria
Mass spectro. 2 x 10-8 atmos. CC/sec He
Resistance to Soldering
Lead Integrity
MIL-STD-202, Mtd 210D, Cond. J
235°C; 30 seconds
MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress
Marking Permanence
Life Test
MIL-STD-883, Mtd 2015.8
MIL-STD-883, Mtd 1005.6
Resistance to solvents
125°C, powered, 1000 hours minimum
2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585
800-888-1499 or www.champtech.com
2
Similar pages