J114FL RoHS Compliant E197851 E 29.24 x 13.15 x 15.7 mm Features t • • • • Switching capacity 16A Produced in accordance to IEC 60335-1 PC board mounting UL/CUL certified Contact Data* Contact Arrangement 1A = SPST N.O. Contact Rating Contact Resistance < 50 milliohms initial 1C = SPDT Contact Material AgSnO2 2A = DPST N.O. Maximum Switching Power 480W, 4000VA 2C = DPDT Maximum Switching Voltage 380VAC, 110VDC 12A @ 250VAC; 30 VDC, General Purpose, 85°C Maximum Switching Current 16A 16A @ 250VAC; 30VDC, General Purpose, 85°C 8A @ 277VAC; 30VDC, General Purpose, 85°C Coil Data* Coil Voltage VDC Coil Resistance Ω +/- 10% Pick Up Voltage VDC (max) Release Voltage VDC (min) 75% of rated voltage 10% of rated voltage Rated Max 5 6.5 62 3.75 .5 6 7.8 90 4.50 .6 9 11.7 202 6.75 .9 12 15.6 360 9.00 1.2 24 31.2 1440 18.00 2.4 48 62.4 5760 36.00 3.6 Coil Power W Operate Time ms Release Time ms .41 10 5 General Data* Electrical Life @ rated load 100K cycles, average Mechanical Life 10M cycles, average Insulation Resistance 100M Ω min. @ 500VDC initial Dielectric Strength, Coil to Contact 5000V rms min. @ sea level initial Contact to Contact * Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 1000V rms min. @ sea level initial Shock Resistance 500m/s2 for 11 ms Vibration Resistance 1.50mm double amplitude 10~40Hz Operating Temperature -55oC to +105oC Storage Temperature -55oC to +155oC Solderability 260oC for 5 s Weight 14g www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice. J114FL Ordering Information 1. Series J114FL 1C S 16 12VDC .41 J114FL 2. Contact Arrangement 1A = SPST N.O. 1C = SPDT 2A = DPST N.O. 2C = DPDT 3. Sealing Option S = Sealed 4. Contact Rating 12 = 12A **only available with 1 pole relays 16 = 16A **only available with 1 pole relays 8 = 8A **only available with 2 pole relays 5. Coil Voltage 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC 6. Coil Power .41 = .41W Dimensions - 12amp Single Pole Units = mm 29.05 [1.14] 12.90 [.51] 16.10 [.63] 3.25 TYP [.13] 2.70 [.11] 20.00 [.79] 3.50 [.14] 7.50 [.30] 2.70 [.11] 0.55 TYP [.02] 0.80 TYP [.03] (2X) 0.45 [.02] (2X) 0.60 [.02] 3.50 [.14] page 2 www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 Specifications and availability subject to change without notice. J114FL Dimensions - 16amp Single Pole, 8amp Double Pole Units = mm 29.15 [1.15] 12.90 [.51] 16.00 [.63] 3.25 TYP [.13] 2.76 [.11] 20.00 [.79] 7.50 [.30] 5.00 [.20] 0.55 TYP [.02] (2X) 0.45 [.02] 2.70 [.11] 0.80 TYP [.03] (2X) 0.60 [.02] 5.00 [.20] Schematics & PC Layouts Bottom Views 7.50 [.30] Ø1.30 TYP [.05] 20.00 [.79] 7.50 [.30] Ø1.30 TYP [.05] 20.00 [.79] 3.50 [.14] 1A (12amp) www.citrelay.com 3.50 [.14] 3.50 [.14] 1C (12amp) phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 3 Specifications and availability subject to change without notice. J114FL Schematics & PC Layouts Bottom Views 7.50 [.30] Ø1.30 TYP [.05] 20.00 [.79] 7.50 [.30] 5.00 [.20] 20.00 [.79] 1A (16amp) 7.50 [.30] 7.50 [.30] 5.00 [.20] www.citrelay.com Ø1.30 TYP [.05] 20.00 [.79] 2A (8amp) page 4 5.00 [.20] 5.00 [.20] 1C (16amp) Ø1.30 TYP [.05] 20.00 [.79] Ø1.30 TYP [.05] 5.00 [.20] 5.00 [.20] 2C (8amp) phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 Specifications and availability subject to change without notice.