SHANGHAI SUNRISE ELECTRONICS CO., LTD. D5SB10 THRU D5SB80 SINGLE PHASE GLASS PASSIVATED SIP BRIDGE RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 100 TO 800V CURRENT: 6.0A FEATURES D5-SB • Glass passivated junction chip • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Surge overload rating: 150 A peak • High temperature soldering guaranteed: 250oC/10sec/ 0.575" (9.5mm) lead length at 5 lbs tension MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: UL-94 Class V-O recognized flame retardant epoxy • Polarity: Polarity symbol marked on body • Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS SYMBOL D5SB D5SB D5SB D5SB D5SB 10 20 40 60 80 100 200 400 600 800 UNITS Maximum Repetitive Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS 70 140 280 420 560 V Maximum DC Blocking Voltage VDC 100 200 400 600 800 V Maximum Average Forward Rectified Current (Ta=50oC) IF(AV) 6.0 A Peak Forward Surge Current (8.5ms single half sine-wave superimposed on rated load) IFSM 150 A Maximum Instantaneous Forward Voltage (at forward current 3.0A DC) VF 1.1 V 5 500 -55 to + 150 µA µA Maximum DC Reverse Current (at rated DC blocking voltage) Ta=25oC o Ta=125 C Storage and Operating Junction Temperature IR TSTG,TJ V o C http://www.sse-diode.com