LNJ03004BND3 Surface Mounting Chip LED 3230 Type Absolute Maximum Ratings Ta = 25°C Parameter Symbol Rating Unit Power dissipation PD 430 mW Forward current *1 IF 120 mA Pulse forward current *2 IFP 200 mA Junction temperature Tj 110 °C Operating ambient temperature Topr –30 to +85 °C Storage temperature Tstg –40 to +100 °C Lighting Color White (5 000 [Kelvin]) Note) *1: IF is different by radiated factor of evaluation board. This value is mounted on evaluation board at Rthj-a = 35.0 °C/W. *2: The condition of pulse current IFP is 55 ms pulse width, 10 % duty. Electro-Optical Characteristics Ta = 25°C±3°C Parameter Symbol Min Typ Max Unit IFP = 60 mA 2.6 3.0 3.4 V F IFP = 60 mA 18.0 24.3 36.0 lm x IFP = 60 mA 0.345 y IFP = 60 mA 0.355 Ra IFP = 60 mA 82 Forward voltage *1 VF Luminous flux *2 Chromaticity coordinates *3 Color Rendering Index Conditions Note) *1: Complete Forward Voltage measurement within 0.1 seconds. Tolerance ±3% *2: Complete Luminous flux measurement within 0.1 seconds. Tolerance ±10% *3: Complete Chromaticity coordinates measurement within 0.1 seconds. Tolerance of chromaticity is ±0.01 F IFP IFP VF 60 40 20 0 0 50 100 150 200 200 160 120 80 40 0 2.0 250 2.5 Pulse forward current IFP (mA) 3.0 Relative Luminous Flux Ta 120 Relative Luminous Flux (%) Pulse forward current IFP (mA) Luminous Flux F (lm) 80 3.5 100 80 60 40 20 0 −40 4.0 Forward voltage VF (V) −20 0 20 40 60 80 100 Ambient temperature Ta (°C) Relative Spectral Power Wavelength IF Ta 1.2 X X Y 0.8 0.6 0.4 0.2 0 350 500 650 Wavelength (nm) Publication date: June 2014 800 Directive characteristics 0° 1.0 0.8 80 0.6 60 0.4 10° 20° 30° 40° 50° 60° 0 −30 Radiation Angle (deg) 40 80° 20 −60 80 70° 40 0.2 −90 Forward current IF (mA) 120 1.0 Relative luminous intensity (a.u.) Relative Spectral Power (a.u.) Y 0.2 0.4 0.6 0.8 90° 1.0 Relative luminous intensity (a.u.) Ver. DEK 0 0 20 40 60 80 100 Ambient temperature Ta (°C) 1 LNJ03004BND3 Package (Unit: mm) Ver. DEK 2 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: – Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202