Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : EB Type : A Features ● Endurance : +105 °C 5000 h to 10000 h ripple hight frequency (Hight Voltage) ● RoHS compliant ● Hight Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance –40 °C to +105 °C 10 V.DC to 63 V.DC 2.2 µF to 3300 µF –25 °C to +105 °C 160 V.DC to 450 V.DC 10 µF to 330 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) Leakage current After 2 minutes application of rated working voltage at +20 °C (Whichever is greater) Dissipation factor (tan d) Please see the attached characteristics list After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restord to 20 °C, the capacitors shall meet the limits specified below. (10 V.DC to 63 V.DC) Duration : 05×11 to 08×11.5 : 5000 hours 08×15 to 012.5×25 : 10000 hours Capacitance change Within ±30 % of the initial value tan d < 300 % of the initial limit DC leakage current Within the initial limit Endurance (160 V.DC to 450 V.DC) Duration : 5000 hours Capacitance change Within ±20 % of the initial value tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf life Frequency correction factor for ripple current (10 V.DC ~ 63 V.DC) Capacitance (µF) 2.2 to 10 22 to 470 1000 to 3300 60 0.75 0.85 0.95 Frequency (Hz) 120 1k 10 k 1.00 1.40 1.55 1.00 1.20 1.25 1.00 1.05 1.10 Rated voltage (V.DC) 160 to 250 350 to 450 100 k 1.65 1.30 1.15 120 0.55 0.50 Frequency (Hz) 10 k to 30k 30 k to 100k 1k 0.85 0.90 1.00 0.80 0.90 1.00 Sleeve Pressure relief 06.3 < fd±0.05 Dimensions < 08 010 < + L✽ 14 min. 0D±0.5 3 min. F±0.5 – 0D±0.5 ✽ L < 16 : L±1.0 (08×15 only L±1.5) L > 20 : L±2.0 0D 0d F 5 0.5 2.0 6.3 0.5 2.5 (Unit : mm) 8 0.6 3.5 10 0.6 5.0 12.5 0.6 5.0 16 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 18 0.8 7.5 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 05×11 to 08×11.5=5000 h, 08×15 to 012.5×25=10000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 100 220 10 16 25 35 50 63 470 2200 3300 1000 2200 47 100 220 330 470 1000 33 220 330 470 1000 2.2 3.3 4.7 10 22 47 100 220 330 470 2.2 3.3 4.7 10 22 33 47 100 220 330 470 0D L 5 6.3 8 8 12.5 12.5 10 12.5 5 6.3 8 8 10 12.5 5 8 10 10 12.5 5 5 5 5 5 6.3 8 10 10 12.5 5 5 5 5 6.3 6.3 8 8 8 10 12.5 12.5 11 11.2 15 11.5 20 25 20 25 11 11.2 11.5 15 16 20 11 15 16 20 25 11 11 11 11 11 11.2 11.5 16 20 20 11 11 11 11 11.2 11.2 15 11.5 15 20 20 25 Specification Lead length (mm) Lead space Ripple Lead current tan d Endurance dia. (120 Hz) (120 Hz) Taping Taping (hours) (+105 °C) (+20 °C) 0d Straight ✽B ✽H (mA r.m.s.) 66 0.30 5000 0.5 2.0 5.0 2.5 100 0.30 5000 0.5 2.5 5.0 2.5 278 0.30 10000 0.6 3.5 5.0 180 0.30 5000 0.6 3.5 5.0 540 0.32 10000 0.6 5.0 5.0 802 0.34 10000 0.6 5.0 5.0 430 0.25 10000 0.6 5.0 5.0 706 0.27 10000 0.6 5.0 5.0 55 0.22 5000 0.5 2.0 5.0 2.5 95 0.22 5000 0.5 2.5 5.0 2.5 125 0.22 5000 0.6 3.5 5.0 255 0.22 10000 0.6 3.5 5.0 321 0.22 10000 0.6 5.0 5.0 498 0.22 10000 0.6 5.0 5.0 46 0.18 5000 0.5 2.0 5.0 2.5 197 0.18 10000 0.6 3.5 5.0 278 0.18 10000 0.6 5.0 5.0 349 0.18 10000 0.6 5.0 5.0 586 0.18 10000 0.6 5.0 5.0 15 0.15 5000 0.5 2.0 5.0 2.5 18 0.15 5000 0.5 2.0 5.0 2.5 18 0.15 5000 0.5 2.0 5.0 2.5 27 0.15 5000 0.5 2.0 5.0 2.5 39 0.15 5000 0.5 2.0 5.0 2.5 61 0.15 5000 0.5 2.5 5.0 2.5 99 0.15 5000 0.6 3.5 5.0 234 0.15 10000 0.6 5.0 5.0 293 0.15 10000 0.6 5.0 5.0 370 0.15 10000 0.6 5.0 5.0 16.5 0.12 5000 0.5 2.0 5.0 2.5 20 0.12 5000 0.5 2.0 5.0 2.5 23 0.12 5000 0.5 2.0 5.0 2.5 30 0.12 5000 0.5 2.0 5.0 2.5 40 0.12 5000 0.5 2.5 5.0 2.5 50 0.12 5000 0.5 2.5 5.0 2.5 94 0.12 10000 0.6 3.5 5.0 80 0.12 5000 0.6 3.5 5.0 180 0.12 10000 0.6 3.5 5.0 292 0.12 10000 0.6 5.0 5.0 381 0.12 10000 0.6 5.0 5.0 454 0.12 10000 0.6 5.0 5.0 Min. Packaging Q'ty Part No. EEUEB1A101S( ) EEUEB1A221S( ) EEUEB1A471( ) EEUEB1A471S( ) EEUEB1A222( ) EEUEB1A332( ) EEUEB1C102( ) EEUEB1C222( ) EEUEB1E470S( ) EEUEB1E101S( ) EEUEB1E221S( ) EEUEB1E331( ) EEUEB1E471( ) EEUEB1E102( ) EEUEB1V330S( ) EEUEB1V221( ) EEUEB1V331( ) EEUEB1V471( ) EEUEB1V102( ) EEUEB1H2R2S( ) EEUEB1H3R3S( ) EEUEB1H4R7S( ) EEUEB1H100S( ) EEUEB1H220S( ) EEUEB1H470S( ) EEUEB1H101S( ) EEUEB1H221( ) EEUEB1H331( ) EEUEB1H471( ) EEUEB1J2R2S( ) EEUEB1J3R3S( ) EEUEB1J4R7S( ) EEUEB1J100S( ) EEUEB1J220S( ) EEUEB1J330S( ) EEUEB1J470( ) EEUEB1J470S( ) EEUEB1J101( ) EEUEB1J221( ) EEUEB1J331( ) EEUEB1J471( ) Straight leads Taping (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 2000 2000 1000 1000 500 500 500 500 2000 2000 1000 1000 500 500 2000 1000 500 500 500 2000 2000 2000 2000 2000 2000 1000 500 500 500 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 500 500 · When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 22 33 47 68 160 100 150 220 330 22 33 47 68 200 100 150 220 22 33 47 250 68 100 150 10 22 33 350 47 68 100 10 22 400 33 47 10 22 450 33 47 0D 10 10 12.5 12.5 16 16 18 16 18 16 18 18 10 12.5 12.5 12.5 16 16 18 16 18 18 12.5 12.5 12.5 16 16 18 16 18 18 10 12.5 16 16 18 16 18 18 10 12.5 16 16 18 16 18 12.5 16 18 16 18 18 L 20 20 20 25 20 25 20 31.5 25 31.5 25 31.5 20 20 20 25 20 25 20 31.5 25 31.5 20 20 25 20 25 20 31.5 25 31.5 20 20 20 25 20 31.5 25 31.5 20 25 20 25 20 31.5 25 20 25 20 31.5 25 31.5 Specification Ripple current tan d Endurance (120 Hz) (120 Hz) (hours) (+105 °C) (+20 °C) (mA r.m.s.) 470 0.15 5000 470 0.15 5000 600 0.15 5000 750 0.15 5000 750 0.15 5000 1060 0.15 5000 1060 0.15 5000 1280 0.15 5000 1280 0.15 5000 1280 0.15 5000 1280 0.15 5000 1690 0.15 5000 470 0.15 5000 600 0.15 5000 600 0.15 5000 750 0.15 5000 750 0.15 5000 1060 0.15 5000 1060 0.15 5000 1280 0.15 5000 1280 0.15 5000 1690 0.15 5000 560 0.15 5000 560 0.15 5000 710 0.15 5000 710 0.15 5000 990 0.15 5000 990 0.15 5000 1200 0.15 5000 1200 0.15 5000 1470 0.15 5000 270 0.20 5000 350 0.20 5000 480 0.20 5000 640 0.20 5000 640 0.20 5000 780 0.20 5000 780 0.20 5000 970 0.20 5000 250 0.24 5000 410 0.24 5000 410 0.24 5000 600 0.24 5000 600 0.24 5000 730 0.24 5000 730 0.24 5000 310 0.24 5000 560 0.24 5000 560 0.24 5000 680 0.24 5000 680 0.24 5000 850 0.24 5000 Lead length (mm) Lead space Lead dia. Taping Straight 0d ✽B 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.6 0.8 0.8 0.8 0.8 0.8 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 – 7.5 – 7.5 – 5.0 5.0 5.0 5.0 7.5 7.5 7.5 – 7.5 – 5.0 5.0 5.0 7.5 7.5 7.5 – 7.5 – 5.0 5.0 7.5 7.5 7.5 – 7.5 – 5.0 5.0 7.5 7.5 7.5 – 7.5 5.0 7.5 7.5 – 7.5 – Min. Packaging Q'ty Part No. EEUEB2C220( ) EEUEB2C330( ) EEUEB2C470( ) EEUEB2C680( ) EEUEB2C680S( ) EEUEB2C101( ) EEUEB2C101S( ) EEUEB2C151 EEUEB2C151S( ) EEUEB2C221 EEUEB2C221S( ) EEUEB2C331 EEUEB2D220( ) EEUEB2D330( ) EEUEB2D470( ) EEUEB2D680( ) EEUEB2D680S( ) EEUEB2D101( ) EEUEB2D101S( ) EEUEB2D151 EEUEB2D151S( ) EEUEB2D221 EEUEB2E220( ) EEUEB2E330( ) EEUEB2E470( ) EEUEB2E470S( ) EEUEB2E680( ) EEUEB2E680S( ) EEUEB2E101 EEUEB2E101S( ) EEUEB2E151 EEUEB2V100( ) EEUEB2V220( ) EEUEB2V330S( ) EEUEB2V470( ) EEUEB2V470S( ) EEUEB2V680 EEUEB2V680S( ) EEUEB2V101 EEUEB2G100( ) EEUEB2G220( ) EEUEB2G220S( ) EEUEB2G330( ) EEUEB2G330S( ) EEUEB2G470 EEUEB2G470S( ) EEUEB2W100( ) EEUEB2W220( ) EEUEB2W220S( ) EEUEB2W330( ) EEUEB2W330S( ) EEUEB2W470 Straight Taping leads (pcs) (pcs) 200 200 200 200 100 100 100 100 100 100 100 50 200 200 200 200 100 100 100 100 100 50 200 200 200 100 100 100 100 100 50 200 200 100 100 100 100 100 50 200 200 100 100 100 100 100 200 100 100 100 100 50 500 500 500 500 250 250 250 – 250 – 250 – 500 500 500 500 250 250 250 – 250 – 500 500 500 250 250 250 – 250 – 500 500 250 250 250 – 250 – 500 500 250 250 250 – 250 500 250 250 – 250 – · When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Mar. 2016