NB100ELT23L 3.3V Dual Differential LVPECL/LVDS to LVTTL Translator The NB100ELT23L is a dual differential LVPECL/LVDS to LVTTL translator. Because LVPECL (Positive ECL) or LVDS levels are used, only +3.3 V and ground are required. The small outline 8-lead package and the dual gate design of the ELT23L makes it ideal for applications which require the translation of a clock and a data signal. The ELT23L is available in only the ECL 100K standard. Since there are no LVPECL outputs or an external VBB reference, the ELT23L does not require both ECL standard versions. The LVPECL inputs are differential. Therefore, the NB100ELT23L can accept any standard differential LVPECL/LVDS input referenced from a VCC of +3.3 V. www.onsemi.com MARKING DIAGRAMS* 8 SOIC−8 D SUFFIX CASE 751 8 1 1 Features • • • • • KT23L ALYW G 8 2.1 ns Typical Propagation Delay TSSOP−8 DT SUFFIX CASE 948R 8 Maximum Operating Frequency > 160 MHz 1 24 mA LVTTL Outputs K23L ALYWG G 1 Operating Range: VCC = 3.0 V to 3.6 V with GND = 0 V These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant A L Y W G = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package (Note: Microdot may be in either location) *For additional marking information, refer to Application Note AND8002/D. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. © Semiconductor Components Industries, LLC, 2015 August, 2015 − Rev. 12 1 Publication Order Number: NB100ELT23L/D NB100ELT23L Table 1. PIN DESCRIPTION D0 D0 1 8 2 7 LVPECL D1 VCC PIN Q0 LVTTL 3 6 Q1 FUNCTION Q0, Q1 LVTTL Outputs D0*, D1* D0**, D1** Differential LVPECL Inputs VCC Positive Supply GND Ground *Pins will default to VCC/2 when left open. If connected to a common termination voltage under no signal conditions, then the device will be susceptible to self−oscillation. D1 4 5 **Pins will default to 2/3 VCC when left open. If connected to a common termination voltage under no signal conditions, then the device will be susceptible to self−oscillation. See AND8020, Section 6 for options. GND Figure 1. 8−Lead Pinout (Top View) and Logic Diagram Table 2. ATTRIBUTES Characteristics Value Internal Input Pulldown Resistor D D Internal Input Pullup Resistor ESD Protection 50 kW Human Body Model Machine Model Charged Device Model Moisture Sensitivity, Indefinite Time Out of Drypack (Note 1) SO−8 TSSOP−8 Flammability Rating 50 kW 75 kW Oxygen Index: 28 to 34 Transistor Count > 1.5 kV > 100 V > 2 kV Pb−Free Pkg Level 1 Level 3 UL 94 V−0 @ 1.25 in 91 Devices Meets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test 1. For additional information, see Application Note AND8003/D. www.onsemi.com 2 NB100ELT23L Table 3. MAXIMUM RATINGS Symbol Parameter Condition 1 Rating Unit 3.8 V 3.8 V 50 100 mA mA Operating Temperature Range −40 to +85 °C Tstg Storage Temperature Range −65 to +150 °C qJA Thermal Resistance (Junction−to−Ambient) 0 lfpm 500 lfpm SO−8 SO−8 190 130 °C/W °C/W qJC Thermal Resistance (Junction−to−Case) Standard Board SO−8 41 to 44 °C/W qJA Thermal Resistance (Junction−to−Ambient) 0 lfpm 500 lfpm TSSOP−8 TSSOP−8 185 140 °C/W °C/W qJC Thermal Resistance (Junction−to−Case) Standard Board TSSOP−8 41 to 44 °C/W Tsol Wave Solder <2 to 3 sec @ 260°C 265 °C VCC Power Supply GND = 0 V VI Input Voltage GND = 0 V Iout Output Current Continuous Surge TA Pb−Free Condition 2 VI ≤ VCC Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Table 4. PECL DC CHARACTERISTICS VCC = 3.3 V, GND = 0 V (Note 2) −40°C Symbol Characteristic 25°C 85°C Min Typ Max Min Typ Max Min Typ Max Unit ICCH Power Supply Current (Outputs set to HIGH) 10 23 30 10 23 30 10 24 30 mA ICCL Power Supply Current (Outputs set to LOW) 15 26 35 15 26 35 15 27 35 mA VIH Input HIGH Voltage 2075 2420 2075 2420 2075 2420 mV VIL Input LOW Voltage 1355 1675 1355 1675 1355 1675 mV VIHCMR Input HIGH Voltage Common Mode Range (Note 3) 1.2 3.3 1.2 3.3 1.2 3.3 V IIH Input HIGH Current 150 mA IIL Input LOW Current 150 −150 150 −150 −150 mA NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. 2. All values vary 1:1 with VCC. 3. VIHCMR minimum varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential input signal. www.onsemi.com 3 NB100ELT23L Table 5. TTL DC CHARACTERISTICS VCC = 3.3 V, GND = 0.0 V, TA = −40°C to 85°C Symbol Characteristic Condition VOH Output HIGH Voltage IOH = −3.0 mA VOL Output LOW Voltage IOL = 24 mA IOS Output Short Circuit Current Min Typ Max Unit 2.4 V −180 0.5 V −50 mA NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Table 6. AC CHARACTERISTICS VCC = 3.3 V $ 5%, GND = 0.0 V (Note 4) −40°C Symbol Min Characteristic 25°C Typ fmax Maximum Frequency 160 tPLH, tPHL Propagation Delay to Output Differential (Note 5) CL = 20 pF 1.55 tSK+ + tSK− − tSKPP Output−to−Output Skew++ Output−to−Output Skew− − Part−to−Part Skew (Note 6) tJITTER Random Clock Jitter (RMS) VPP Input Voltage Swing (Differential Configuration) tr tf Output Rise/Fall Times CL = 20 pF (0.8 V to 2.0 V) Max Min Typ 85°C Max 160 Min Typ Max 160 Unit MHz ns 1.9 2.95 1.55 1.9 60 25 500 6.0 20 150 800 1200 700 300 900 1700 1250 2.95 1.55 1.9 60 25 500 3.25 60 25 500 ps 6.0 20 ps 6.0 20 150 800 1200 150 800 1200 mV 700 300 900 1700 1250 700 300 900 1700 1250 ps NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. 4. Measured using a 750 mV source, 50% duty cycle clock source. All loading with 500 W to GND, CL = 20 pF. 5. Reference (VCC = 3.3 V ± 5%; GND = 0 V). 6. Skews are measured between outputs under identical conditions. APPLICATION TTL RECEIVER CHARACTERISTIC TEST *CL includes fixture capacitance CL * RL AC TEST LOAD GND Figure 2. TTL Output Loading Used for Device Evaluation www.onsemi.com 4 NB100ELT23L ORDERING INFORMATION Package Shipping† NB100ELT23LDG SO−8 (Pb−Free) 98 Units / Rail NB100ELT23LDR2G SO−8 (Pb−Free) 2500 / Tape & Reel NB100ELT23LDTG TSSOP−8 (Pb−Free) 100 Units / Rail NB100ELT23LDTR2G TSSOP−8 (Pb−Free) 2500 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Resource Reference of Application Notes AN1405/D − ECL Clock Distribution Techniques AN1406/D − Designing with PECL (ECL at +5.0 V) AN1503/D − ECLinPSt I/O SPiCE Modeling Kit AN1504/D − Metastability and the ECLinPS Family AN1568/D − Interfacing Between LVDS and ECL AN1672/D − The ECL Translator Guide AND8001/D − Odd Number Counters Design AND8002/D − Marking and Date Codes AND8020/D − Termination of ECL Logic Devices AND8066/D − Interfacing with ECLinPS AND8090/D − AC Characteristics of ECL Devices www.onsemi.com 5 NB100ELT23L PACKAGE DIMENSIONS SOIC−8 NB CASE 751−07 ISSUE AK NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. 751−01 THRU 751−06 ARE OBSOLETE. NEW STANDARD IS 751−07. −X− A 8 5 S B 0.25 (0.010) M Y M 1 4 K −Y− G C N DIM A B C D G H J K M N S X 45 _ SEATING PLANE −Z− 0.10 (0.004) H M D 0.25 (0.010) M Z Y S X J S SOLDERING FOOTPRINT* 1.52 0.060 7.0 0.275 4.0 0.155 0.6 0.024 1.270 0.050 SCALE 6:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 6 MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.33 0.51 1.27 BSC 0.10 0.25 0.19 0.25 0.40 1.27 0_ 8_ 0.25 0.50 5.80 6.20 INCHES MIN MAX 0.189 0.197 0.150 0.157 0.053 0.069 0.013 0.020 0.050 BSC 0.004 0.010 0.007 0.010 0.016 0.050 0 _ 8 _ 0.010 0.020 0.228 0.244 NB100ELT23L PACKAGE DIMENSIONS TSSOP−8 DT SUFFIX CASE 948R−02 ISSUE A 8x 0.15 (0.006) T U K REF 0.10 (0.004) S 2X L/2 8 1 PIN 1 IDENT S T U V S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH. PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE. 5. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 6. DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE -W-. S 5 0.25 (0.010) B −U− L 0.15 (0.006) T U M M 4 A −V− F DETAIL E C 0.10 (0.004) −T− SEATING PLANE D −W− G DETAIL E DIM A B C D F G K L M MILLIMETERS MIN MAX 2.90 3.10 2.90 3.10 0.80 1.10 0.05 0.15 0.40 0.70 0.65 BSC 0.25 0.40 4.90 BSC 0_ 6_ INCHES MIN MAX 0.114 0.122 0.114 0.122 0.031 0.043 0.002 0.006 0.016 0.028 0.026 BSC 0.010 0.016 0.193 BSC 0_ 6_ ECLinPS is a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NB100ELT23L/D