Fairchild MCT2.300W Phototransistor optocoupler Datasheet

PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
BLACK PACKAGE (NO -M SUFFIX)
WHITE PACKAGE (-M SUFFIX)
6
6
1
6
1
6
1
1
6
6
1
1
DESCRIPTION
The MCT2XXX series optoisolators consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin
dual in-line package.
FEATURES
• UL recognized (File # E90700)
• VDE recognized (File # 94766)
– Add option V for white package (e.g., MCT2V-M)
– Add option 300 for black package (e.g., MCT2.300)
• MCT2 and MCT2E are also available in white package by specifying -M suffix, eg. MCT2-M
APPLICATIONS
• Power supply regulators
• Digital logic inputs
• Microprocessor inputs
SCHEMATIC
1
6
2
5
3
NC
4
PIN 1. ANODE
2. CATHODE
3. NO CONNECTION
4. EMITTER
5. COLLECTOR
6. BASE
© 2005 Fairchild Semiconductor Corporation
Page 1 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol
Device
Value
Units
TOTAL DEVICE
Storage Temperature
TSTG
ALL
-55 to +150
°C
Operating Temperature
TOPR
ALL
-55 to +100
°C
Lead Solder Temperature
TSOL
ALL
260 for 10 sec
°C
-M
250
Non-M
260
-M
2.94
Non-M
3.3
-M
60
Non-M
100
3
V
A
Total Device Power Dissipation @ TA = 25°C
PD
Derate above 25°C
mW
mW/°C
EMITTER
DC/Average Forward Input Current
IF
Reverse Input Voltage
VR
ALL
IF(pk)
ALL
3
-M
120
Non-M
150
-M
1.41
Non-M
2.0
IC
ALL
50
mA
VCEO
ALL
30
V
ALL
150
mW
-M
1.76
Non-M
2.0
Forward Current - Peak (300µs, 2% Duty Cycle)
LED Power Dissipation @ TA = 25°C
PD
Derate above 25°C
DETECTOR
Collector Current
Collector-Emitter Voltage
Detector Power Dissipation @ TA = 25°C
Derate above 25°C
© 2005 Fairchild Semiconductor Corporation
PD
Page 2 of 15
mA
mW
mW/°C
mW/°C
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
ELECTRICAL CHARACTERISTICS (TA = 25°C Unless otherwise specified.)
Individual Component Characteristics
Parameter
Test Conditions
Symbol
Device
Min
Typ**
Max
Unit
VF
MCT2/-M
MCT2E/-M
MCT271
MCT2200
MCT2201
MCT2202
1.25
1.50
V
MCT210
1.33
IR
MCT2/-M
MCT2E/-M
MCT271
MCT2200
MCT2201
MCT2202
0.001
10
µA
EMITTER
Input Forward Voltage
(IF = 20 mA)
(TA = 0-70°C, IF = 40 mA)
Reverse Leakage Current
(VR = 3.0 V)
(TA = 0-70°C, VR = 6.0 V)
DETECTOR
Collector-Emitter Breakdown Voltage
Collector-Base Breakdown Voltage
(IC = 1.0 mA, IF = 0)
(TA = 0-70°C)
(IC = 10 µA, IF = 0)
MCT210
BVCEO
30
100
V
BVCBO
MCT2/-M
MCT2E/-M
MCT271
MCT2200
MCT2201
MCT2202
70
120
V
MCT210
30
BVECO
MCT2/-M
MCT2E/-M
MCT271
MCT2200
MCT2201
MCT2202
7
10
V
MCT210
6
10
(TA = 0-70°C)
Emitter-Collector Breakdown Voltage
(IE = 100 µA, IF = 0)
(TA = 0-70°C)
Collector-Emitter Dark Current
Collector-Base Dark Current
Capacitance
ALL
(VCE = 10 V, IF = 0)
MCT210
ICEO
ALL
(VCB = 10 V, IF = 0)
ICBO
ALL
(VCE = 0 V, f = 1 MHz)
CCE
ALL
(VCE = 5 V, TA = 0-70°C)
1
8
50
nA
30
µA
20
nA
pF
** Typical values at TA = 25°C
© 2005 Fairchild Semiconductor Corporation
Page 3 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
TRANSFER CHARACTERISTICS (TA = 25°C Unless otherwise specified.)
DC Characteristic
Test Conditions
Symbol
(TA = 0-70°C)
(IF = 10 mA, VCE = 5 V)
Output Collector
Current
Collector-Emitter
Saturation Voltage
AC Characteristic
Saturated Turn-on
Time from 5 V to
0.8 V
Saturated Turn-off
Time from SAT to
2.0 V
CTR
(IF = 10 mA, VCE = 10 V)
Device
Min
MCT210
150
MCT2200
20
MCT2201
100
MCT2202
63
MCT2
MCT2-M
MCT2E
MCT2E-M
20
MCT271
45
MCT210
50
(IC = 2 mA, IF = 16 mA)
MCT2
MCT2-M
MCT2E
MCT2E-M
MCT271
VCE (SAT)
MCT210
(IC = 2.5 mA, IF = 10 mA)
MCT2200
MCT2201
MCT2202
(IF = 15 mA, VCC = 5 V, RL = 2 kΩ)
(RB = Open) (Fig. 20)
(IF = 20 mA, VCC = 5 V, RL = 2 kΩ)
(RB = 100 kΩ) (Fig. 20)
(IF = 15 mA, VCC = 5 V, RL = 2 kΩ)
(RB = Open) (Fig. 20)
(IF = 20 mA, VCC = 5 V, RL = 2 kΩ)
(RB = 100 kΩ) (Fig. 20)
ton
toff
Max
Unit
125
%
(IF = 3.2 mA to 32 mA, VCE = 0.4 V)
(TA = 0-70°C)
(IC = 16 mA, IF = 32 mA, TA = 0-70°C)
Typ**
90
0.4
MCT2
1.1
MCT2E
1.1
MCT2
1.3
MCT2E
1.3
MCT2
50
MCT2E
50
MCT2
20
MCT2E
20
Turn-on Time
(IF = 10 mA, VCC = 10 V, RL = 100 Ω)
ton
MCT2-M
MCT2E-M
2
Turn-off Time
(IF = 10 mA, VCC = 10 V, RL = 100 Ω)
toff
MCT2-M
MCT2E-M
2
Rise Time
(IF = 10 mA, VCC = 10 V, RL = 100 Ω)
tr
MCT2-M
MCT2E-M
2
Fall Time
(IF = 10 mA, VCC = 10 V, RL = 100 Ω)
tf
MCT2-M
MCT2E-M
1.5
V
µs
** Typical values at TA = 25°C
© 2005 Fairchild Semiconductor Corporation
Page 4 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
TRANSFER CHARACTERISTICS (Cont.)
AC Characteristic
Test Conditions
Symbol
Saturated turn-on time
(IF = 16 mA, RL = 1.9kΩ, VCC = 5 V)
(Fig. 20)
Saturated turn-off time
(Approximates a typical
TTL interface)
Saturated turn-off time
(Approximates a typical
low power TTL interface)
(IF = 16 mA, RL = 4.7kΩ, VCC = 5 V)
(Fig. 20)
Saturated rise time
(IF = 16 mA, RL = 560Ω, VCC = 5 V)
(Fig. 20, 21)
Saturated fall time
Saturated propagation
delay - high to low
Saturated propagation
delay - low to high
Min
Typ**
ton
1.0
toff
48
ton
Saturated turn-on time
Device
MCT271
Unit
1.0
toff
98
tr
1.0
tf
11
TPD (HL)
Max
MCT210
1.0
(IF = 16 mA, RL = 2.7kΩ) (Fig. 20, 21)
Non-saturated
turn on time
Non-saturated
turn off time
Non-saturated rise time
Non-saturated fall time
Non-saturated
turn-on time
Non-saturated
turn-off time
µs
50
TPD (LH)
(IC = 2 mA, VCC = 10 V, RL = 100Ω
(Fig. 20)
(IC = 2 mA, VCC = 5 V, RL = 100Ω)
(Fig. 20)
(IC = 2 mA, VCC = 5 V, RL = 100Ω)
(Fig. 20)
TON
TOFF
tr
tf
MCT2200
MCT2201
MCT2202
2
10
2
10
2
MCT210
2
ton
2
7
2
7
MCT271
toff
** Typical values at TA = 25°C
ISOLATION CHARACTERISTICS
Characteristic
Input-Output Isolation Voltage
Test Conditions Symbol
(Non ‘-M’, Black Package) (f = 60 Hz, t = 1 min)
(‘-M’, White Package) (f = 60 Hz, t = 1 sec)
Isolation Resistance
Isolation Capacitance
(VI-O = 500 VDC)
(VI-O = &, f = 1 MHz)
(‘-M’ White Package)
VISO
RISO
CISO
Min
Typ*
Max
Units
5300
Vac(rms)
7500
Vac(pk)
1011
Ω
0.5
0.2
pF
2
pF
Note
* Typical values at TA = 25°C
© 2005 Fairchild Semiconductor Corporation
Page 5 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
TYPICAL PERFORMANCE CURVES
Fig. 2 LED Forward Voltage vs. Forward Current
(White Package)
1.8
1.8
1.7
1.7
VF - FORWARD VOLTAGE (V)
VF - FORWARD VOLTAGE (V)
Fig. 1 LED Forward Voltage vs. Forward Current
(Black Package)
1.6
1.5
1.4
TA = -55°C
1.3
1.2
TA = 25°C
1.1
TA = 100°C
1.6
1.5
1.4
TA = -55°C
1.3
TA = 25°C
1.2
TA = 100°C
1.1
1.0
1.0
1
10
100
1
10
IF - LED FORWARD CURRENT (mA)
100
IF - LED FORWARD CURRENT (mA)
Fig.3 Normalized CTR vs. Forward Current
(Black Package)
Fig.4 Normalized CTR vs. Forward Current
(White Package)
1.4
1.6
VCE = 5.0V
TA = 25°C
Normalized to
IF = 10 mA
VCE = 5.0V
TA = 25°C
1.4
1.2
Normalized to
IF = 10 mA
1.2
NORMALIZED CTR
NORMALIZED CTR
1.0
0.8
0.6
0.4
1.0
0.8
0.6
0.4
0.2
0.2
0.0
0.0
0
5
10
15
20
0
2
IF - FORWARD CURRENT (mA)
4
6
8
10
12
14
16
18
20
IF - FORWARD CURRENT (mA)
Fig. 5 Normalized CTR vs. Ambient Temperature
(Black Package)
Fig. 6 Normalized CTR vs. Ambient Temperature
(White Package)
1.6
1.4
1.4
1.2
IF = 5 mA
NORMALIZED CTR
NORMALIZED CTR
IF = 5 mA
1.2
IF = 10 mA
1.0
0.8
0.6
IF = 10 mA
0.8
IF = 20 mA
0.6
Normalized to
IF = 10 mA
TA = 25°C
0.4
Normalized to
IF = 10 mA
TA = 25°C
IF = 20 mA
0.4
-75
1.0
0.2
-50
-25
0
25
50
75
100
125
TA - AMBIENT TEMPERATURE (°C)
© 2005 Fairchild Semiconductor Corporation
-60
-40
-20
0
20
40
60
80
100
TA - AMBIENT TEMPERATURE (°C)
Page 6 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
Fig. 8 CTR vs. RBE (Unsaturated)
(White Package)
Fig. 7 CTR vs. RBE (Unsaturated)
(Black Package)
1.0
1.0
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
MCT271
0.9
VCE= 5.0 V
0.8
IF = 20 mA
0.7
0.6
IF = 10 mA
0.5
0.4
IF = 5 mA
0.3
0.2
0.1
0.9
IF = 20 mA
0.8
IF = 10 mA
0.7
IF = 5 mA
0.6
0.5
0.4
0.3
0.2
VCE= 5.0 V
0.1
0.0
0.0
10
100
1000
10
100
RBE- BASE RESISTANCE (kΩ)
Fig. 9 CTR vs. RBE (Saturated)
(Black Package)
Fig. 10 CTR vs. RBE (Saturated)
(White Package)
1.0
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
1.0
0.9
VCE= 0.3 V
0.8
IF = 20 mA
0.7
0.6
IF = 10 mA
0.5
0.4
IF = 5 mA
0.3
0.2
0.1
0.9
VCE= 0.3 V
0.8
IF = 20 mA
0.7
0.6
IF = 10 mA
0.5
0.4
0.3
IF = 5 mA
0.2
0.1
0.0
0.0
10
100
1000
10
100
RBE- BASE RESISTANCE (k Ω)
10
1
IF = 2.5 mA
0.1
IF = 10 mA
IF = 20 mA
IF = 5 mA
TA = 25˚C
0.001
0.01
0.1
1
10
Fig. 12 Collector-Emitter Saturation Voltage vs Collector Current
(White Package)
VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V)
100
0.01
100
TA = 25˚C
10
1
IF = 2.5 mA
0.1
IF = 20 mA
0.01
IF = 5 mA
0.001
0.01
IF = 10 mA
0.1
1
10
IC - COLLECTOR CURRENT (mA)
IC - COLLECTOR CURRENT (mA)
© 2005 Fairchild Semiconductor Corporation
1000
RBE- BASE RESISTANCE (k Ω)
Fig. 11 Collector-Emitter Saturation Voltage vs Collector Current
(Black Package)
VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V)
1000
RBE- BASE RESISTANCE (kΩ)
Page 7 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
Fig. 14 Switching Speed vs. Load Resistor
(White Package)
Fig. 13 Switching Speed vs. Load Resistor
(Black Package)
1000
1000
IF = 10 mA
VCC = 10 V
TA = 25°C
100
SWITCHING SPEED - (µs)
SWITCHING SPEED - (µs)
IF = 10 mA
VCC = 10 V
TA = 25°C
Toff
10
Tf
Ton
1
Tr
0.1
100
Toff
10
Ton
1
Tr
1
10
100
0.1
1
10
100
R-LOAD RESISTOR (kΩ)
R-LOAD RESISTOR (kΩ)
Fig. 16 Normalized ton vs. RBE
(White Package)
Fig. 15 Normalized ton vs. RBE
(Black Package)
5.0
5.0
VCC = 10 V
IC = 2 mA
RL = 100 Ω
4.5
NORMALIZED ton - (ton(RBE) / ton(open))
NORMALIZED ton - (ton(RBE) / ton(open))
Tf
0.1
0.1
4.0
3.5
3.0
2.5
2.0
1.5
1.0
4.5
VCC = 10 V
IC = 2 mA
RL = 100 Ω
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
10
100
1000
10000
10
100000
RBE- BASE RESISTANCE (k Ω)
1.3
NORMALIZED toff - (toff(RBE) / toff(open))
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
VCC = 10 V
IC = 2 mA
RL = 100 Ω
0.4
1000
10000
100000
Fig. 18 Normalized toff vs. RBE
(White Package)
1.4
0.5
100
RBE- BASE RESISTANCE (k Ω)
Fig. 17 Normalized toff vs. RBE
(Black Package)
NORMALIZED toff - (toff(RBE) / toff(open))
MCT271
0.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
VCC = 10 V
IC = 2 mA
RL = 100 Ω
0.5
0.4
0.3
0.2
0.2
0.1
0.1
10
100
1000
10000
100000
RBE- BASE RESISTANCE (k Ω)
© 2005 Fairchild Semiconductor Corporation
10
100
1000
10000
100000
RBE- BASE RESISTANCE (k Ω)
Page 8 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
Fig. 19 Dark Current vs. Ambient Temperature
10000
ICEO - COLLECTOR -EMITTER DARK CURRENT (nA)
VCE = 10 V
TA = 25°C
1000
100
10
1
0.1
0.01
0.001
0
20
40
60
80
100
TA - AMBIENT TEMPERATURE (°C)
TEST CIRCUIT
WAVE FORMS
TEST CIRCUIT
WAVE FORMS
VCC = 10V
IC
IF
INPUT
RL
IC
IF
INPUT
INPUT PULSE
VCC = 10V
INPUT PULSE
RL
10%
OUTPUT
RBE
OUTPUT PULSE
10%
90%
OUTPUT
tr
90%
RBE
tr
ton
Adjust IF to produce IC = 2 mA
OUTPUT PULSE
ton
tf
tf
toff
toff
Adjust IF to produce IC = 2 mA
Figure 20. Switching Time Test Circuit and Waveforms
Figure 20. Switching Time Test Circuit and Waveforms
INPUT
TPDHL
TPDLH
5V
OUTPUT
(SATURATED)
1.5 V
1.5 V
SAT
Figure 21. Switching Time Waveforms (MCT210)
© 2005 Fairchild Semiconductor Corporation
Page 9 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
Black Package (No -M Suffix)
Package Dimensions (Through Hole)
Package Dimensions (Surface Mount)
PIN 1
ID.
0.350 (8.89)
0.330 (8.38)
3
0.270 (6.86)
0.240 (6.10)
2
PIN 1
ID.
1
SEATING PLANE
0.270 (6.86)
0.240 (6.10)
0.350 (8.89)
0.330 (8.38)
4
0.070 (1.78)
0.045 (1.14)
5
6
0.300 (7.62)
TYP
0.070 (1.78)
0.045 (1.14)
0.200 (5.08)
0.135 (3.43)
0.200 (5.08)
0.165 (4.18)
0.020 (0.51)
MIN
0.154 (3.90)
0.100 (2.54)
0.016 (0.41)
0.008 (0.20)
0.022 (0.56)
0.016 (0.41)
0.016 (0.40)
0.008 (0.20)
0.022 (0.56)
0.016 (0.41)
0° to 15°
0.020 (0.51)
MIN
0.100 (2.54)
TYP
0.016 (0.40) MIN
0.315 (8.00)
MIN
0.405 (10.30)
MAX
0.300 (7.62)
TYP
Lead Coplanarity : 0.004 (0.10) MAX
0.100 (2.54)
TYP
Package Dimensions (0.4” Lead Spacing)
Recommended Pad Layout for
Surface Mount Leadform
PIN 1 ID
3
2
1
0.070 (1.78)
0.270 (6.86)
0.240 (6.10)
0.060 (1.52)
4
5
6
SEATING PLANE
0.350 (8.89)
0.330 (8.38)
0.415 (10.54)
0.070 (1.78)
0.045 (1.14)
0.100 (2.54)
0.295 (7.49)
0.030 (0.76)
0.200 (5.08)
0.135 (3.43)
0.154 (3.90)
0.100 (2.54)
0.004 (0.10)
MIN
0.016 (0.40)
0.008 (0.20)
0° to 15°
0.022 (0.56)
0.016 (0.41)
0.100 (2.54) TYP
0.400 (10.16)
TYP
NOTE
All dimensions are in inches (millimeters)
© 2005 Fairchild Semiconductor Corporation
Page 10 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
White Package (-M Suffix)
Package Dimensions (Through Hole)
Package Dimensions (Surface Mount)
0.350 (8.89)
0.320 (8.13)
0.350 (8.89)
0.320 (8.13)
Pin 1 ID
Pin 1 ID
0.260 (6.60)
0.240 (6.10)
0.260 (6.60)
0.240 (6.10)
0.070 (1.77)
0.040 (1.02)
0.390 (9.90)
0.332 (8.43)
0.070 (1.77)
0.040 (1.02)
0.320 (8.13)
0.014 (0.36)
0.010 (0.25)
0.320 (8.13)
0.014 (0.36)
0.010 (0.25)
0.200 (5.08)
0.115 (2.93)
0.200 (5.08)
0.115 (2.93)
0.100 (2.54)
0.015 (0.38)
0.012 (0.30)
0.008 (0.20)
0.025 (0.63)
0.020 (0.51)
0.020 (0.50)
0.016 (0.41)
0.100 (2.54)
15°
0.100 [2.54]
0.035 (0.88)
0.012 (0.30)
0.020 (0.50)
0.016 (0.41)
0.012 (0.30)
Package Dimensions (0.4” Lead Spacing)
Recommended Pad Layout for
Surface Mount Leadform
0.350 (8.89)
0.320 (8.13)
Pin 1 ID
0.070 (1.78)
0.260 (6.60)
0.240 (6.10)
0.060 (1.52)
0.070 (1.77)
0.040 (1.02)
0.014 (0.36)
0.010 (0.25)
0.425 (10.79)
0.100 (2.54)
0.305 (7.75)
0.030 (0.76)
0.200 (5.08)
0.115 (2.93)
0.100 (2.54)
0.015 (0.38)
0.020 (0.50)
0.016 (0.41)
0.100 [2.54]
0.012 (0.30)
0.008 (0.21)
0.425 (10.80)
0.400 (10.16)
NOTE
All dimensions are in inches (millimeters)
© 2005 Fairchild Semiconductor Corporation
Page 11 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
ORDERING INFORMATION
Order Entry Identifier
Black Package (No Suffix)
White Package (-M Suffix)
Description
.S
S
.SD
SR2
.W
T
0.4" Lead Spacing
VDE 0884
Surface Mount Lead Bend
Surface Mount; Tape and reel
.300
V
.300W
TV
VDE 0884, 0.4" Lead Spacing
.3S
SV
VDE 0884, Surface Mount
.3SD
SR2V
VDE 0884, Surface Mount, Tape & Reel
MARKING INFORMATION
1
3
MCT2
2
V XX YY K
6
1
V
5
4
3
Black Package, No Suffix
MCT2
2
X YY Q
6
4
5
White Package, -M Suffix
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
One or two digit year code
• Two digits for black package parts, e.g., ‘03’
• One digit for white package parts, e.g., ‘3’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
*Note – Parts built in the white package (M suffix) that do not have the ‘V’ option (see
definition 3 above) that are marked with date code ‘325’ or earlier are marked in the
portrait format.
© 2005 Fairchild Semiconductor Corporation
Page 12 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
QT Carrier Tape Specifications (“D” Taping Orientation) (Black Package, No Suffix)
12.0 ± 0.1
4.85 ± 0.20
0.30 ± 0.05
4.0 ± 0.1
4.0 ± 0.1
Ø1.55 ± 0.05
1.75 ± 0.10
7.5 ± 0.1
13.2 ± 0.2
9.55 ± 0.20
0.1 MAX
10.30 ± 0.20
16.0 ± 0.3
Ø1.6 ± 0.1
User Direction of Feed
QT Carrier Tape Specifications (“D” Taping Orientation) (White Package, -M Suffix)
12.0 ± 0.1
4.5 ± 0.20
2.0 ± 0.05
0.30 MAX
4.0 ± 0.1
Ø1.5 MIN
1.75 ± 0.10
11.5 ± 1.0
21.0 ± 0.1
0.1 MAX
© 2005 Fairchild Semiconductor Corporation
9.1 ± 0.20
10.1 ± 0.20
Page 13 of 15
24.0 ± 0.3
Ø1.5 ± 0.1/-0
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
Reflow Profile (White Package, -M Suffix)
300
280
260
240
220
200
180
160
°C 140
120
100
80
60
40
20
0
260°C
>245°C = 42 Sec
Time above
183°C = 90 Sec
1.822°C/Sec Ramp up rate
33 Sec
0
60
120
180
270
360
Time (s)
Reflow Profile (Black Package, No Suffix)
Temperature (°C)
300
215°C, 10–30 s
250
225 C peak
200
150
Time above 183°C, 60–150 sec
100
50
Ramp up = 3C/sec
• Peak reflow temperature: 225°C (package surface temperature)
• Time of temperature higher than 183°C for 60–150 seconds
• One time soldering reflow is recommended
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
© 2005 Fairchild Semiconductor Corporation
Page 14 of 15
6/15/05
PHOTOTRANSISTOR OPTOCOUPLERS
MCT2
MCT2200
MCT2E
MCT2201
MCT210
MCT2202
MCT271
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;
NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES
OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and (c) whose failure to perform
when properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to
result in a significant injury of the user.
© 2005 Fairchild Semiconductor Corporation
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
Page 15 of 15
6/15/05