Vectron MQF90-0-3000-10 Environment conditions according to vectron cf001 Datasheet

13 October 2011
Specification for monolithic crystal filter: M Q F 9 0 . 0 – 3 0 0 0 / 1 0
1. General
1.1. Package:
Terminate plate materials: Ni / Au
Ni > 2.0 µm
Au > 0.75 µm
1.2.
1.3.
1.4.
1.5.
1.6.
Type name:
Number of poles:
Operating temperature range:
Operable temperature range:
Storage temperature range:
2.
Electric values
2.1. Nominal centre frequency fo:
MQF 90.0-3000/10
2
-20°C to +85°C
-40°C to +85°C
-55°C to +125°C
90.0 MHz
2.2. Pass band
2.2.1. Bandwidth between 3 dB - frequencies:
>  15 kHz
2.2.2. Ripple:
< 0.5 dB at fo  7.5 kHz
2.2.3. Insertion loss:
( measured on smallest attenuation in pass band )
< 1.0 dB
2.3. Stop band
2.3.1. fo  50 kHz
> 16 dB
2.3.2. Alternate attenuation:
> 30 dB
2.3.3. Spurious responses: fo  50 kHz…500kHz
> 10 dB
2.4. Group delay:
fo  15 kHz
< 6 µs
2.5. Intermodulation
2.5.1. frequency 1 / 2
90.10 / 90.20
2.5.2. frequency 3 / 4
89.90 / 89.80
2.5.3. input power level
-10 dBm
2.5.4. IP3
> 30 dBm
2.6. Terminating impedance ( input and output ):
3000  // - 0.7 pF
2.7. Nominal input power level
-10 dBm
2.7.1 Maximum input power level
+ 5 dBm
3.
• M90A1
Marking:
VI yyww
4.
Environment conditions according to Vectron CF001
4.1. Parallel flow of environment tests according to MIL-STD:
20g vib, per MIL-STD 883, procedure 2007.3, condition A
3000g shock, per MIL-STD 883, procedure 2002.4, condition C
5000g shock, per MIL-STD 883, procedure 2002.4, condition D
5.
Packing
Drawing out direction
maximum 1000 pcs. / reel
Marking
Marking
Marking
Marking
Marking
Marking
Marking
Marking
Tape dimension ( mm )
Trailer
leader part ( 400mm min, )
cover tape
carrier tape
200mm min.
150mm min.
components placed
carrier tape
cover tape
160mm min.
240mm min.
Marking
Marking
Marking
Marking
Marking
Marking
Marking
Marking
Marking
Marking
Drawing out direction ( leading direction )
Tape ( all dimensions in mm )
P2
W: 16.0 ± 0.1
Po: 4.0 ± 0.1
P1: 8.0 ± 0.1
P2: 2.0 ± 0.1
Do: 1.5 +0.1 / -0
D1: 1.6 +0.1 / -0
E:
1.75 ± 0.1
F:
7.5 ± 0.1
Ko:
1.7 ± 0.1
Ao:
5.6 ± 0.1
Bo:
7.6 ± 0.1
t:
0.3 ± 0.05
P1
Po
Bo
W
F
D1
Do
E
t
Ao
Ko
W2
A
ø 178 ± 2
ø 13 ± 0.5
ø 60 ± 1
17.5 ± 1.5
21.5 ± 1.5
N
A:
C:
N:
W1:
W2:
C
Reel ( all dimension in mm )
W1
______________________________________________________________________
Edited by:
date: _____________________ name: ___________________________
Similar pages