Datatronic DR357-2-472 Shielded smd inductor dr357-2 sery Datasheet

May 23, 2010
SHIELDED SMD INDUCTOR DR357-2 SERIES
Features





Low Profile Surface Mount Design
Flat Top for Pick and Place
Inductance Range from 4.7µH to 150.0µH
Operating Temp. -40°C to +105°C
Tinned Leads with Leaded Solder is Available (note 7)
ELECTRICAL SPECIFICATIONS AT 25ºC
Part No.
DR357-2-472
DR357-2-682
DR357-2-822
DR357-2-103
DR357-2-123
DR357-2-153
DR357-2-183
DR357-2-223
DR357-2-273
DR357-2-333
DR357-2-393
DR357-2-473
DR357-2-563
DR357-2-683
DR357-2-823
DR357-2-104
DR357-2-124
DR357-2-154
Inductance
(H)  30%
4.7
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
120.0
150.0
DCR
() Max.
0.030
0.035
0.050
0.058
0.072
0.087
0.116
0.145
0.176
0.213
0.269
0.299
0.336
0.451
0.514
0.700
0.765
0.876
Irms
(A) Max.
3.30
3.15
2.50
2.40
2.10
2.05
1.50
1.20
1.15
1.10
1.00
0.90
0.78
0.68
0.63
0.56
0.53
0.51
Isat
(A) Max.
4.00
3.20
3.00
2.70
2.40
2.20
2.00
1.80
1.65
1.48
1.35
1.20
1.15
1.05
0.95
0.85
0.76
0.70
MECHANICAL OUTLINES
Notes:
1. All dimensions are shown in millimeter “mm”
2. General tolerance 0.2mm, unless other specified
3. Inductance Test: 100kHz, 0.1Vrms
4. Irms for an approximate 40C temperature rise
5. Isat for an approximate 35% drop maximum of the initial value
6. Tape and reel quantity, 1000 pcs/reel
7. For non-RoHS parts replace DR prefix with 42- (e.g. DR357-2 becomes 42-357-2)
8. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020D
DATATRONIC:
28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Fax: 951-928-7701 Email: [email protected]
499 King’s Road, Hong Kong Tel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.