FKQ Series Crystal Clock Oscillator (XO) AEC-Q200 Qualified 3.2 x 2.5mm FKQ 3.3V CMOS Low Jitter XO Package: (Scale: none; dimensions are in mm) Recommended Land Pattern: 3.2 x 2.5mm Ceramic SMD Product Features • AEC-Q200 Qualified CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. • 1 to 156.25 MHz Frequency Range • <1 ps RMS jitter Pin Functions: • 3.3V CMOS/TTL compatible logic levels • Pin-compatible with standard 3.2 x 2.5mm packages • Designed for standard reflow and washing techniques • Low power standby mode Pin Function 1 OE Function 2 Ground 3 Clock Output 4 V DD • Pb-free and RoHS/Green compliant CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY. Product Description The FKQ Series 3.3V crystal clock oscillator achieves superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a non-PLL oscillator design, is compatible with LVCMOS/LVTTL logic levels. The device, available on tape and reel, is contained in a 3.2 x 2.5mm surface-mount ceramic package. Part Ordering Information: FK XXX YYYY Q D Q = Automotive Grade YYYY = Serial Number XXX = Frequency�Code Product�Family Following the above format, Saronix-eCera part numbers will be assigned upon confirmation of exact customer requirements. Applications The FKQ series is an ideal reference clock for Automotive applications requiring low jitter and low power, including: • Infotainment systems • Head units SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com 16-0007 All specifications are subject to change without notice. FKQ 3.3 RevA 01/11/2016 1 3.3V CMOS Low Jitter XO FKQ FDQ Series Crystal Clock Oscillator (XO) AEC-Q200 Qualified | 3.2 x 2.5mm Electrical Performance Parameter Min. Output Frequency Typ. 1 Supply Voltage +3.135 +3.3 Max. Units 156.25 MHz +3.465 V Notes As specified 8 Supply Current, Output Enabled 1 to 60 MHz 20 mA 60.0001 to 134 MHz 30 Supply Current, Standby Mode Frequency Stability Operating Temperature Range -40 Output Logic 0, VOL Output Logic 1, VOH µA 1 to 156.25 MHz ppm See Note 1 below +85 °C 10% V DD V AECQ Grade 3 V Output Load 45 Jitter, Phase 10 ±25 to ±50 90% V DD Duty Cycle Rise and Fall Time 134.0001 to 156.25 MHz 15 pF 55 % Measured 50% V DD ns Measured 20/80% of waveform 1 to 60 MHz 4.5 60.0001 to 156.25 MHz 2.5 10 to 40 MHz 1 ps RMS 12kHz to 5 MHz frequency band 40.0001 to 156.25 MHz 1 ps RMS 12kHz to 20 MHz frequency band Jitter, Accumulated 1 to 80 MHz 5 80.0001 to 156.25 MHz 3 Jitter, Peak to Peak 1 to 80 MHz 50 80.0001 to 156.25 MHz 30 ps RMS (1-σ) 20.000 adjacent periods ps pk-pk 100.000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C), aging (1 year at 25°C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. Units 0.7 V DD Input Voltage (pin 1), Output Disable (low power standby) 0.3 V DD Internal Pullup Resistance 30 Notes V or open V Output is Hi-Z kΩ Output Disable Delay 200 ns Absolute Maximum Ratings Parameter Storage Temperature For the latest product information visit: For test circuit go to: Min. Typ. -55 Max. Units +125 °C Notes http://www.pericom.com/products/crystals-and-crystal-oscillators/xo/?part=FKQ+3.3V http://www.pericom.com/assets/sre/tc_cmos2.pdf For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_3225_xo.pdf SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com 16-0007 All specifications are subject to change without notice. FKQ 3.3 RevA 01/11/2016 2