FGP30B - FGP30D GLASS PASSIVATED ULTRAFAST RECTIFIER DIODES VOLTAGE RANGE: 100 - 200V CURRENT: 3.0 A Features ! ! ! ! ! High current capability High surge current capability High reliability Low reverse current Low forward voltage drop ! Super fast recovery time B A A Mechanical Data ! C D Case : DO-201AD Molded plastic DO-201AD ! ! Epoxy : UL94V-O rate flame retardant Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed ! Polarity : Color band denotes cathode end ! Mounting position : Any ! Weight : 1.21 grams Dim Min Max A 25.40 ¾ B 7.20 9.50 C 1.20 1.30 D 4.80 5.30 All Dimensions in mm Maximum Ratings and Electrical Characteristics TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol FGP30B FGP30C FGP30D Unit Maximum Recurrent Peak Reverse Voltage VRRM 100 150 200 Volts Maximum RMS Voltage VRMS 70 105 140 Volts Maximum DC Blocking Voltage VDC 100 150 200 Volts Maximum Average Forward Current 0.375"(9.5mm) Lead Length Ta = 55 °C IF(AV) 3.0 Amps. IFSM 125 Amps. VF 0.95 Volts Peak Forward Surge Current, 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Peak Forward Voltage at IF = 3.0 A. Maximum DC Reverse Current Ta = 25 °C IR 5 µA at Rated DC Blocking Voltage Ta = 100 °C IR(H) 50 µA Maximum Reverse Recovery Time ( Note 1 ) Trr 35 ns Typical Junction Capacitance ( Note 2 ) CJ 50 pf Junction Temperature Range TJ - 65 to + 150 °C Storage Temperature Range TSTG - 65 to + 150 °C Notes : ( 1 ) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A. ( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC 1 of 2 www.sunmate.tw 3,5 (TA = 25 °C unless otherwise specified) 150 Peak Forward Surge Current (A) Average Forward Rectified Current (A) Ratings and Characteristics Curves 3 2,5 2 1,5 1 0,5 TJ = TJ max. 8.3ms Single Half Sine-Wave 125 100 75 50 25 0 0 0 25 50 75 100 125 150 Number of Cycles at 60 HZ Ambient Temperature (°C) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 1. Maximum Forward Current Derating Curve 1000 Tj = 175 °C 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 Tj = 150 °C Tj = 125 °C 1 Tj = 25 °C 0,1 0,01 0,2 0,4 0,6 0,8 1 100 10 1 1,2 0,1 1 Instantaneous Forward Voltage (V) 10 100 Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 100 Tj = 175 °C Transient Thermal Impedance (°C/W) Instantaneous Reverse Leakage Current (µA) 100 10 1 175 Tj = 150 °C 10 Tj = 125 °C 1 0,1 0,01 Tj = 25 °C 1 0,01 0,001 20 40 60 80 10 100 0,1 1 10 100 tp-Pulse Duration (sec) Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics Figure 6. Typical Transient Thermal Impedance 2 of 2 www.sunmate.tw