DL200 - DL210 SILICON RECTIFIER DIODES PRV : 50 - 1000 Volts Io : 2.0 Amperes D2 FEATURES : * * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop Pb / RoHS Free 1.00 (25.4) MIN. 0.161 (4.10) 0.154 (3.90) 0.284 (7.20) 0.268 (6.84) MECHANICAL DATA : 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) * Case : D2 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.465 gram Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL DL201 DL202 DL203 DL204 DL205 DL206 DL207 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current 0.375"(9.5mm) Lead Length Ta = 50 °C IF 2.0 A IFSM 75 A VF 1.0 V Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage at IF = 2.0 Amps. Maximum DC Reverse Current Ta = 25 °C at rated DC Blocking Voltage Ta = 100 °C Typical Junction Capacitance (Note1) IR 5.0 µA IR(H) 50 µA CJ 75 pF RθJA 20 °C/W Junction Temperature Range TJ - 65 to + 175 °C Storage Temperature Range TSTG - 65 to + 175 °C Typical Thermal Resistance (Note2) Notes : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC (2) Thermal resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounted. Page 1 of 2 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES (DL201 - DL207) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 75 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES 2.0 1.6 1.2 0.8 0.4 RESISTIVE OR INDUCTIVE LOAD 8.3 ms SINGLE HALF SINE WAVE Ta = 50 °C 60 45 30 15 0 0 0 25 50 75 100 125 150 175 1 AMBIENT TEMPERATURE, ( °C) 100 FORWARD CURRENT, AMPERES 4 6 10 20 40 60 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS REVERSE CURRENT, MICROAMPERES FIG.3 - TYPICAL FORWARD CHARACTERISTICS 10 1.0 Pulse W idth = 300 µs 2% Duty Cycle 0.1 2 NUMBER OF CYCLES AT 60Hz TJ = 25 °C 10 TJ = 100 °C 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) 0.01 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 25, 2005