MACOM MAAP-000072-SMB004 Amplifier, power, 1.3w 17.7-19.7 ghz Datasheet

RoHS
Compliant
MAAP-000072-PKG003
Amplifier, Power, 1.3W
17.7-19.7 GHz
Rev —
Advance Information
Features
♦ 1.3 Watt Saturated Output Power Level
♦ Variable Drain Voltage (4-10V) Operation
♦ MSAG™ Process
YYWW
AP072G
XXXX
MACOM
Description
The MAAP-000072-PKG0003 is a 4-stage 1.3 W power amplifier with on-chip bias networks in a 20 lead MLP package,
allowing easy assembly. This product is fully matched to 50
ohms on both the input and output. It can be used as a
power amplifier stage or as a driver stage in high power applications.
Each device is 100% RF tested to ensure performance
compliance. The part is fabricated using M/A-COM’s GaAs
Multifunction Self-Aligned Gate (MSAG) Process.
M/A-COM’s MSAG™ process features robust silicon-like
manufacturing processes, planar processing of ion implanted transistors and multiple implant capability enabling
power, low-noise, switch and digital FETs on a single chip.
The use of refractory metals and the absence of platinum in
the gate metal formulation prevents hydrogen poisoning
when employed in hermetic packaging.
Primary Applications
♦ Point-to-Point Radios
♦ 18 GHz Band
Also Available in:
Description
Die
Ceramic Package
Die Sample Board
Die Mechanical Sample
Packaged Sample Board
Part Number
MAAPGM0072-DIE
MAAPGM0072
MAAP-000072-SMB004
MAAP-000071-MCH000
MAAP-000072-SMB003
(Lead Free)
Electrical Characteristics: TB = 40°C1, Z0 = 50 Ω, VDD = 8V, IDQ = 500mA2, Pin = 12 dBm, RG = 200 Ω
Parameter
1
1.
2.
Symbol
Typical
Units
Bandwidth
f
17.7-19.7
GHz
Output Power
POUT
31
dBm
1-dB Compression Point
P1dB
30
dBm
Small Signal Gain
G
19
dB
Input VSWR
VSWR
2.0:1
Output VSWR
VSWR
1.6:1
Gate Current
IGG
10
mA
Drain Current
IDD
750
mA
TB = MMIC Base Temperature
Adjust VGG between –2.6 and –1.2V to achieve specified Idq.
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
MAAP-000072-PKG003
Amplifier, Power, 1.3W
17.7-19.7 GHz
Rev —
Advance Information
Maximum Operating Conditions 3
Parameter
Symbol
Absolute Maximum
Units
Input Power
PIN
17.0
dBm
Drain Supply Voltage
VDD
+12.0
V
Gate Supply Voltage
VGG
-3.0
V
Quiescent Drain Current (No RF)
IDQ
790
mA
Quiescent DC Power Dissipated (No RF)
PDISS
7.9
W
Junction Temperature
TJ
170
°C
Storage Temperature
TSTG
-55 to +150
°C
3. Operation beyond these limits may result in permanent damage to the part.
Recommended Operating Conditions4
Characteristic
Symbol
Min
Typ
Max
Unit
Drain Voltage
VDD
4.0
8.0
10.0
V
Gate Voltage
VGG
-2.6
-2.0
-1.2
V
Input Power
PIN
12.0
14.0
dBm
Junction Temperature
TJ
150
°C
Thermal Resistance
ΘJC
MMIC Base Temperature
TB
16.4
°C/W
Note 4
°C
4. MMIC Base Temperature = 170°C — ΘJC* VDD * IDQ
5. Operation outside of these ranges may reduce product reliability.
Operating Instructions
This device is static sensitive. Please handle with
care. To operate the device, follow these steps.
1. Apply VGG = -2.7 V, VDD= 0 V.
2. Ramp VDD to desired voltage, typically 8.0 V.
3. Adjust VGG to set IDQ, (approximately @ –2.0 V).
4. Set RF input.
5. Power down sequence in reverse. Turn VGG off
last.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
MAAP-000072-PKG003
Amplifier, Power, 1.3W
17.7-19.7 GHz
Rev —
Advance Information
Figure 1. 5x5 mm 20-Lead MLP.
VDD
As close to the
package as possible
100pF
0.1μF
YYWW
AP072G
XXXX
MACOM
VGG
As close to the
package as possible
200 Ω
100pF
0.1μF
Figure 2. Recommended Bias Configuration.
Note: The exposed pad centered on the package bottom must be connected to RF
and dc ground for proper electrical and thermal operation.
Refer to M/A-COM Application Note Surface Mounting Instructions for PQFN Packages #S2083* for assembly guidelines.
Additional Precaution: All parts must receive a bake-out of 125ºC for 24 hours prior to any solder reflow operation.
3
*Application Notes can be found by going to the Site Search Page of M/A-COM’s web page (http://www.macom.com/Application%20Notes/
index.htm) and searching for the required Application Note.
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
MAAP-000072-PKG003
Amplifier, Power, 1.3W
17.7-19.7 GHz
Rev —
Advance Information
YYWW
APO72G
XXXX
MACOM
Figure 3. Demonstration Board PN MAAP-000072-SMB003 (available upon request).
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Similar pages