SMD Schottky Barrier Rectifiers CDBAT120-HF Thru. CDBAT1100-HF Forward current: 1.0A Reverse voltage: 20 to 100V RoHS Device Halogen Free 2010/DO-214AC 0.181 (4.60) 0.173 (4.40) Features -Lead less chip form, no lead damage. x 0.020 0.090 (2.30) 0.083 (2.10) -Low power loss, High efficiency. -High current capability, low VF -Plastic package has underwriters laboratory flammability classification 94V-0. 0.045 (1.15) 0.030 (0.75) Mechanical Data (0.50) 0.045 (1.15) 0.030 (0.75) 0.046 (1.16) 0.034 (0.86) -Case: Packed with FRP substrate and epoxy underfilled. -Terminals: Pure Tin plated (Lead-Free),solderable per MIL-STD-750, method 2026. Dimensions in inches and (millimeter) -Polarity: Laser cathode band marking. -Weight: 0.02 gram (approx). Circuit diagram -Packing: 3,000 pieces per 7” reel. Maximum Ratings (At Ta=25°C, unless otherwise noted) Symbol CDBAT120-HF Non-repetitive peak reverse voltage VRM 20 Average forward current IF(AV) 1.0 A Peak forward surge current @8.3ms single half sine-wave IFSM 30 A Parameter Operating junction temperature range Storage temperature CDBAT140-HF CDBAT160-HF CDBAT1100-HF Unit 40 60 -55 to +125 TJ 100 V -55 to +150 °C -55 ~ +150 TSTG °C Electrical Characteristics (At Ta=25°C, unless otherwise noted) Parameter Conditions Type Unit Min. Typ. Max. CDBAT120-HF / CDBAT140-HF - 0.34 0.41 0.47 - IF=0.1A IF=0.5A IF=1.0A CDBAT160-HF - 0.38 0.48 0.60 IF=0.1A IF=0.5A IF=1.0A CDBAT1100-HF - 0.45 0.63 0.76 0.85 IRRM - 0.02 0.20 mA Cj - 110 - pF Junction to ambient (Note 2) RΘJA - 88 - ºC/W Junction to lead (Note 2) RΘJL - 28 - ºC/W IF=0.1A IF=0.5A IF=1.0A Forward voltage (Note1) Symbol Reverse peak reverse current (Note1) VR=Max.VRRM, Ta=25°C Junction capacitance VR=4V, f=1.0MHz VF 0.50 - V 0.70 - Thermal resistance Notes: (1) Pulse test width pw=300usec, 1% duty cycle. (2) Mounted on P.C. board with 0.2*0.2”(5.0*5.0mm) copper pad areas. Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 1 QW-JB042 Comchip Technology CO., LTD. SMD Schottky Barrier Rectifiers RATING AND CHARACTERISTIC CURVES (CDBAT120-HF Thru. CDBAT1100-HF) Fig.2- Maximum Non-repetitive peak forward surge current Fig.1- Forward current derating curve 30 Peak forward surge current, (A) 8.3ms Single Half Sine-Wave F 00-H AT11 CDB Thru 0-HF AT16 CDB 0-HF AT14 CDB Thru 0-HF AT12 CDB Average forward rectified current, (A) 1.0 0.5 Resistive or inductive load P.C.B Mounted on 0.2*0.2”(5.0*5.0mm) Copper pad areas 0 20 15 10 5 0 0 80 60 100 120 140 180 160 10 1 100 Number of cycles at 60Hz Fig.3- Typical Instantaneous Forward Characteristics Fig.4- Typical reverse characteristics Ta=25°C 1.00 1.10 0.01 Instantaneous reverse voltage, (mA) Lead temperature, (°C) 10 Instantaneous forward current, (A) 25 100 10 o TJ=100 C 1.0 0.1 o TJ=25 C 0.01 CDBAT120-HF~140-HF CDBAT160-HF CDBAT1100-HF 0.001 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Forward voltage, (V) 0.001 0 20 40 60 80 100 Percent of rated peak reverse voltage, (%) Fig.5- Typical junction capacitance Junction capacitance, (pF) 400 O TJ=25 C f=1MHz Vsig=50mVP-P 100 10 0.1 1 10 100 Reverse voltage, (V) Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 2 QW-JB042 Comchip Technology CO., LTD. SMD Schottky Barrier Rectifiers Reel Taping Specification d P0 P1 T E Index hole F W B P C A 12 o 0 D2 D1 D W1 Trailer ....... ....... End Device ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed 2010 (DO-214AC) 2010 (DO-214AC) SYMBOL A B C d D D1 D2 (mm) 4.70 ± 0.10 2.40 ± 0.10 1.26 ± 0.10 1.50 ± 0.10 330 ± 2.00 50.0 MIN. 13.0 ± 0.50 (inch) 0.185 ± 0.004 0.094 ± 0.004 0.050 ± 0.004 0.059 ± 0.004 12.992 ± 0.079 1.969 MIN. 0.512 ± 0.020 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 12.00 ± 0.30 14.4 MAX. (inch) 0.069 ± 0.004 0.217 ± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.472 ± 0.012 0.567 MAX. Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 3 QW-JB042 Comchip Technology CO., LTD. SMD Schottky Barrier Rectifiers Marking Code Part Number Marking Code CDBAT120-HF 2 CDBAT140-HF 4 CDBAT160-HF 6 CDBAT1100-HF 10 Suggested PAD Layout 2010/DO-214AC SIZE (mm) (inch) A 1.47MIN. 0.058MIN. B 1.27MIN. 0.050MIN. C 2.60MAX. 0.102MAX. D 5.14REF. 0.202 REF. C A B D Standard Packaging REEL PACK Case Type 2010/DO-214AC REEL Reel Size ( pcs ) (inch) 3,000 7 Company reserves the right to improve product design , functions and reliability without notice. REV:A Page 4 QW-JB042 Comchip Technology CO., LTD.