UNISONIC TECHNOLOGIES CO., LTD MBR1100 Preliminary DIODE 1.0A, 100V SCHOTTKY BARRIER RECTIFIER 1 DESCRIPTION The UTC MBR1100 is a 1.0A schottky barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop, low reverse current and high efficiency, etc. The UTC MBR1100 is suitable for free wheeling diodes, high frequency inverters, low voltage and polarity protection diodes. FEATURES DO-41 2 * Low forward voltage drop * Low reverse current * High surge capacity * Low power loss * High efficiency SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MBR1100L-Z41-B MBR1100G-Z41-B MBR1100L-Z41-R MBR1100G-Z41-R Note: Pin Assignment: A: Anode K: Cathode MBR1100L-Z41-B (1)Packing Type Package DO-41 DO-41 Pin Assignment 1 2 K A K A Packing Tape Box Tape Reel (1) B: Tape Box, R: Tape Reel (2)Package Type (2) Z41: DO-41 (3)Green Package (3) L: Lead Free, G: Halogen Free and Lead Free MARKING Cathode Band for uni-directional Only MBR1100 L: Lead Free G: Halogen Free Date Code www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-270.b MBR1100 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VR 100 V Working Peak Reverse Voltage VRWM 100 V Repetitive Peak Reverse Voltage VRRM 100 V Maximum RMS Reverse Voltage VR(RMS) 70 V Average Forward Rectified Output Current IO 1.0 A Non-Repetitive Peak Forward Surge Current IFSM 50 A 8.3ms Single Half-Sine-Wave Voltage Rate of Change (Rated VR) dv/dt 10 V/ns Operating Junction Temperature (Note 1) TJ -65~+150 °C Storage Temperature (Note 1) TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS PARAMETER Junction to Ambient SYMBOL θJA RATINGS 50 UNIT °C/W ELECTRICAL CHARACTERISTICS (Note 2) (TA=25°C, unless otherwise noted.) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IF=1A, TL=25°C 0.79 V Instantaneous Forward Voltage (Note 2) VF IF=1A, TL=100°C 0.69 V Instantaneous Reverse Current @ Rated dc TL=25°C 50 μA IR Voltage (Note 2) 5.0 mA TL=100°C Notes: 1. The heat generated must be less than the thermal conductivity from Junction to Ambient: PD/TJ<1/θJA. 2. Pulse Test: Pulse Width=300μs, Duty Cycle≤2.0%. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R601-270.b MBR1100 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-270.b