NTC Interchangeable Type 65 Series Thermometrics Thermistors Features • Precision, solid state temperature sensor • Most popular Resistance (R) vs Temperature (T) curves are available • For MC65: Interchangeability down to ±0.09°F (±0.05°C) • Special tight tolerances in the clinical range for medical applications for MC65 For MF65: Interchangeability down to ±0.18°F (±0.10°C) • For MC65: Resin coated for good mechanical strength and resistance to solvents Suitable for use over range of -40°F to 221°F (–40°C to 105°C) • 0.004 in (0.1 mm) diameter heavy isomid insulated bifilar nickel lead wires High sensitivity greater than –4%/°C at 77°F (25°C) • For MF65: Fluidized bed epoxy-coated for good mechanical strength and resistance to solvents • • • • Suitable for temperature measurement, control and compensation • High reliability and stability over interchangeable range Amphenol Advanced Sensors Type MC65 Specifications 3 in (76.2 mm) nominal NTC Interchangeable Type MC65 Epoxy-coated interchangeable chip thermistors with heavy isomid insulated nickel lead-wires. 0.25 in (6.35 mm) Ø 0.065 in (1.65 mm) maximum Options Consult Factory for Availability of Options • Other resistance values in the range of 1000 Ω to 100 kΩ Other tolerances or ranges Other lead wires or lengths Non standard R vs T curves Controlled dimensions • • • • Ø 0.004 in (0.10 mm) NTC Interchangeable Type MC65 Dimensions Thermal and Electrical Properties Dissipation Constant Still air: 0.5 mW/°C Stirred oil: 4 mW/°C Thermal Time Constant Still air: 8 seconds Stirred oil: 0.5 seconds Maximum Power at 77°F (25°C) 25 mW De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C) Ordering Information Select appropriate part number below for resistance and temperature tolerance desired. R25°C Material System ±0.05°C; 35°C to 39°C ±0.075°C; 39°C to 42°C ±0.10°C; 20°C to 45°C ±0.15°C; 0°C to 50°C ±0.1°C; 35°C to 39°C ±0.15°C; 20°C to 45°C ±0.2°C; 0°C to 50°C ±0.15°C; 35°C to 39°C ±0.2°C; 20°C to 45°C ±0.25°C; 0°C to 50°C 2252 F MC65F232A MC65F232B MC65F232C 3000 F MC65F302A MC65F302B MC65F302C 5000 F MC65F502A MC65F502B MC65F502C 10000 F MC65F103A MC65F103B MC65F103C 10000 Y MC65Y103A MC65Y103B MC65Y103C 30000 H MC65H303A MC65H303B MC65H303C 50000 G MC65G503A MC65G503B MC65G503C 100000 Y MC65Y104A MC65Y104B MC65Y104C 100000 G MC65G104A MC65G104B MC65G104C Note: For RoHS compliant product, please add the suffix “N” to the part label. Example: MC65F103AN Type MF65 Specifications NTC Interchangeable Type MF65 Epoxy-coated interchangeable chip thermistors with heavy isomid insulated nickel lead-wires. 3 in (76.2 mm) nominal 0.25 in (6.35 mm) Ø 0.065 in (1.65 mm) maximum Ø 0.004 in (0.10 mm) NTC Interchangeable Type MF65 Dimensions Options Consult Factory for Availability of Options • • • • • Other resistance values in the range of 1000 Ω to 100 kΩ Other tolerances or ranges Other lead wires or lengths Non standard R vs T curves Controlled dimensions Ordering Information Select appropriate part number below for resistance and temperature tolerance desired. Thermal and Electrical Properties R25°C Material System ±0.18°F (±0.1°C); 32°F to 158°F (0°C to 70°C) Dissipation Constant 3000 F MF65F302V Still air: 0.5 mW/°C Stirred oil: 4m W/°C Thermal Time Constant Still air: 8 seconds Stirred oil: 0.5 seconds Maximum Power at 77°F (25°C) 25mW De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C) Note: For RoHS compliant product, please add the suffix “N” to the part label. Example: MF65F302VN Amphenol Advanced Sensors www.amphenol-sensors.com © 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. AAS-920-306C-03/2014