MBR20H200CT, MBRF20H200CT & SB20H200CT-1 TO-220AB FEATURES ITO-220AB • Guarding for overvoltage protection • Low power loss, high efficiency • Low forward voltage drop • High frequency operation 1 2 3 1 2 • Solder dip 260 °C, 40 s 3 MBRF20H200CT MBR20H200CT • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TO-262AA TYPICAL APPLICATIONS For use in high frequency inverters, freewheeling and polarity protection applications. 1 3 2 SB20H200CT-1 PIN 1 PIN 2 PIN 3 CASE MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-262AA Epoxy meets UL 94V-0 flammability rating PRIMARY CHARACTERISTICS IF(AV) 2 x 10 A VRRM 200 V IFSM 290 A Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test VF 0.75 V Mounting Torque: 10 in-lbs maximum TJ 175 °C Polarity: As marked MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR20H200CT UNIT Maximum repetitive peak reverse voltage VRRM 200 V Working peak reverse voltage VRWM 200 V Maximum DC blocking voltage VDC 200 V IF(AV) 20 10 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 290 A Peak repetitive reverse current per diode at tp = 2 µs, 1 kHz IRRM 1.0 A Peak non-repetitive reverse surge energy per diode (8/20 µs waveform) ERSM 20 mJ Non-repetitive avalanche energy per diode at 25 °C, IAS = 2.0 A, L = 10 mH EAS 20 mJ Electrostatic discharge capacitor voltage human body model air discharge: C = 100 pF, R 0 1.5 kΩ VC 25 kV dV/dt 10 000 V/µs TJ, TSTG - 65 to + 175 °C VAC 1500 V Maximum average forward rectified current total device per diode Voltage rate of change (rated VR) Operating junction and storage temperature range Isolation voltage (ITO-220AB only) from terminals to heatsink t = 1 minute www.kersemi.com 1 MBR20H200CT, MBRF20H200CT & SB20H200CT-1 ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) TEST PARAMETER IF = 10 A IF = 10 A IF = 20 A IF = 20 A Maximum instantaneous forward voltage per diode (1) Maximum reverse current per diode at working peak reverse voltage (1) Typical junction capacitance SYMBOL TYP. MAX. UNIT TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C VF 0.81 0.65 0.87 0.74 0.88 0.75 0.97 0.85 V TJ = 25 °C TJ = 125 °C IR 5.0 1.0 µA mA CJ 250 pF 4.0 V, 1 MHz Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance per diode SYMBOL MBR MBRF SB UNIT RθJC 2.0 4.0 2.0 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB MBR20H200CT-E3/45 2.06 45 50/tube Tube ITO-220AB MBRF20H200CT-E3/45 2.20 45 50/tube Tube TO-262AA SB20H200CT-1E3/45 1.58 45 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 25 Average Forward Current (A) Average Forward Current (A) MBR, MBRB 20 MBRF 15 10 5 0 25 50 75 100 125 150 175 350 325 300 275 250 225 200 175 150 125 100 75 50 25 0 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Figure 1. Forward Derating Curve (Total) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode www.kersemi.com 2 MBR20H200CT, MBRF20H200CT & SB20H200CT-1 10 000 TJ = 175 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 125 °C TJ = 75 °C 1 TJ = 25 °C 0.1 0.1 1000 100 10 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 5. Typical Junction Capacitance Per Diode 100 1000 TJ = 175 °C 100 TJ = 125 °C Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) 10 000 TJ = 75 °C 10 1 TJ = 25 °C 0.1 0.01 10 20 30 40 50 60 70 80 90 100 10 MBRF 1 0.1 0.01 MBR, MBRB 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode www.kersemi.com 3 MBR20H200CT, MBRF20H200CT & SB20H200CT-1 PACKAGE OUTLINE DIMENSIONS TO-220AB 0.055 (1.40) 0.047 (1.20) 0.398 (10.10) 0.382 (9.70) 0.343 (8.70) TYP. ITO-220AB 0.185 (4.70) 0.169 (4.30) 0.150 (3.80) 0.139 (3.54) DIA. 0.114 (2.90) 0.106 (2.70) 0.408 (10.36) 0.392 (9.96) 0.055 (1.40) 0.049 (1.25) 1.29 (3.28) DIA. 1.21 (3.08) 0.138 (3.50) 0.122 (3.10) 0.154 (3.90) 0.138 (3.50) 0.067 (1.70) TYP. 0.331 (8.40) TYP. 1 PIN 2 3 0.370 (9.40) 0.354 (9.00) 0.630 (16.00) 0.614 (15.60) 1.161 (29.48) 1.106 (28.08) 0.118 (3.00) TYP. 1 0.102 (2.60) 0.087 (2.20) 0.523 (13.28) 0.507 (12.88) 0.064 (1.62) 0.056 (1.42) 0.200 (5.08) TYP. PIN 2 0.264 (6.70) 0.248 (6.50) 0.396 (10.05) 0.372 (9.45) 0.024 (0.60) 0.018 (0.45) 0.039 (1.00) 0.024 (0.60) 0.058 (1.47) MAX. 0.200 (5.08) TYP. TO-262AA 0.398 (10.10) 0.382 (9.70) 0.185 (4.70) 0.169 (4.30) 0.055 (1.40) 0.039 (1.00) 0.055 (1.40) 0.049 (1.25) K 0.370 (9.40) 0.354 (9.00) 1 PIN 2 3 0.425 (10.80) 0.393 (10.00) 0.488 (12.4) 0.472 (12.00) 0.102 (2.60) 0.087 (2.20) 0.523 (13.28) 0.507 (12.88) 0.035 (0.90) 0.028 (0.70) 0.100 (2.54) TYP. 0.633 (16.07) 0.601 (15.67) 3 0.100 (2.54) TYP. www.kersemi.com 4 0.320 (8.12) 0.304 (7.72) 0.117 (2.96) 0.101 (2.56) 0.035 (0.90) 0.028 (0.70) 0.100 (2.54) TYP. 0.270 (6.88) 0.255 (6.48) 0.638 (16.20) 0.598 (15.20) 0.634 (16.10) 0.618 (15.70) 0.193 (4.90) 0.177 (4.50) 0.108 (2.74) 0.092 (2.34) 0.405 (10.28) 0.389 (9.88) 0.062 (1.57) 0.054 (1.37) 0.200 (5.08) TYP. 0.024 (0.60) 0.018 (0.45) 0.024 (0.60) 0.018 (0.45)