Philips Semiconductors Product specification TrenchMOS transistor Standard level FET GENERAL DESCRIPTION N-channel enhancement mode standard level field-effect power transistor in a plastic envelope using ’trench’ technology. The device features very low on-state resistance and has integral zener diodes giving ESD protection up to 2kV. It is intended for use in automotive and general purpose switching applications. PINNING - TO220AB PIN BUK7514-30 QUICK REFERENCE DATA SYMBOL PARAMETER VDS ID Ptot Tj RDS(ON) Drain-source voltage Drain current (DC) Total power dissipation Junction temperature Drain-source on-state resistance VGS = 10 V PIN CONFIGURATION MAX. UNIT 30 69 125 175 14 V A W ˚C mΩ SYMBOL DESCRIPTION d tab 1 gate 2 drain 3 source tab g drain s 1 23 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134) SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VDS VDGR ±VGS ID ID IDM Ptot Tstg, Tj Drain-source voltage Drain-gate voltage Gate-source voltage Drain current (DC) Drain current (DC) Drain current (pulse peak value) Total power dissipation Storage & operating temperature RGS = 20 kΩ Tmb = 25 ˚C Tmb = 100 ˚C Tmb = 25 ˚C Tmb = 25 ˚C - - 55 30 30 16 69 48 240 125 175 V V V A A A W ˚C TYP. MAX. UNIT - 1.2 K/W 60 - K/W MIN. MAX. UNIT - 2 kV THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS Rth j-mb Thermal resistance junction to mounting base Thermal resistance junction to ambient - Rth j-a in free air ESD LIMITING VALUE SYMBOL PARAMETER CONDITIONS VC Electrostatic discharge capacitor voltage, all pins Human body model (100 pF, 1.5 kΩ) December 1997 1 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET BUK7514-30 STATIC CHARACTERISTICS Tj= 25˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS V(BR)DSS Drain-source breakdown voltage Gate threshold voltage VGS = 0 V; ID = 0.25 mA; VGS(TO) Tj = -55˚C VDS = VGS; ID = 1 mA Tj = 175˚C Tj = -55˚C IDSS Zero gate voltage drain current VDS = 30 V; VGS = 0 V; IGSS Gate source leakage current VGS = ±10 V; VDS = 0 V ±V(BR)GSS Gate-source breakdown voltage Drain-source on-state resistance IG = ±1 mA; RDS(ON) Tj = 175˚C Tj = 175˚C VGS = 10 V; ID = 25 A Tj = 175˚C MIN. TYP. MAX. UNIT 30 27 2.0 1.0 16 3.0 0.05 0.02 - 4.0 4.4 10 500 1 20 - V V V V V µA µA µA µA V - 12 - 14 26 mΩ mΩ MIN. TYP. MAX. UNIT DYNAMIC CHARACTERISTICS Tmb = 25˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS gfs Forward transconductance VDS = 25 V; ID = 25 A 9 18 - S Qg(tot) Qgs Qgd Total gate charge Gate-source charge Gate-drain (Miller) charge ID = 69 A; VDD = 24 V; VGS = 10 V - 38 7 14 - nC nC nC Ciss Coss Crss Input capacitance Output capacitance Feedback capacitance VGS = 0 V; VDS = 25 V; f = 1 MHz - 1500 480 220 - pF pF pF td on tr td off tf Turn-on delay time Turn-on rise time Turn-off delay time Turn-off fall time VDD = 25 V; ID = 25 A; VGS = 10 V; RG = 5 Ω Resistive load - 22 30 40 25 35 60 50 38 ns ns ns ns Ld Internal drain inductance - 3.5 - nH Ld Internal drain inductance - 4.5 - nH Ls Internal source inductance Measured from contact screw on tab to centre of die Measured from drain lead 6 mm from package to centre of die Measured from source lead 6 mm from package to source bond pad - 7.5 - nH December 1997 2 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET BUK7514-30 REVERSE DIODE LIMITING VALUES AND CHARACTERISTICS Tj = 25˚C unless otherwise specified SYMBOL PARAMETER IDR IDRM VSD Continuous reverse drain current Pulsed reverse drain current Diode forward voltage trr Qrr Reverse recovery time Reverse recovery charge CONDITIONS MIN. TYP. MAX. UNIT - - 69 A IF = 25 A; VGS = 0 V IF = 69 A; VGS = 0 V - 0.95 1.0 240 1.2 - A V V IF = 69 A; -dIF/dt = 100 A/µs; VGS = -10 V; VR = 25 V - 60 0.1 - ns µC MIN. TYP. MAX. UNIT - - 125 mJ AVALANCHE LIMITING VALUE SYMBOL PARAMETER CONDITIONS WDSS Drain-source non-repetitive unclamped inductive turn-off energy ID = 36 A; VDD ≤ 15 V; VGS = 10 V; RGS = 50 Ω; Tmb = 25 ˚C December 1997 3 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET 120 BUK7514-30 Normalised Power Derating PD% Zth j-mb / (K/W) 10 BUKx55-lv 110 100 90 D= 1 0.5 80 0.1 0.2 0.1 0.05 0.02 0.01 0 70 60 50 40 30 tp PD D= 20 10 0 0 20 40 60 80 100 Tmb / C 120 140 160 Fig.1. Normalised power dissipation. PD% = 100⋅PD/PD 25 ˚C = f(Tmb) 120 1E-05 1E-03 t/s 1E-01 1E+01 Fig.4. Transient thermal impedance. Zth j-mb = f(t); parameter D = tp/T Normalised Current Derating ID% t T 0.001 1E-07 180 tp T 100 110 100 ID / A 16 10 80 90 BUK7514-30 8 6.5 12 80 6 60 70 60 50 5.5 40 40 5 30 20 20 4.4 4 10 0 0 20 40 60 80 100 Tmb / C 120 140 160 0 180 2 ID / A 8 RDS(ON) / mOhm 40 10 5 7514-30 5.5 6 6.5 / ID V )= tp = 10 us (ON S RD 100 6 Fig.5. Typical output characteristics, Tj = 25 ˚C. ID = f(VDS); parameter VGS 7514-30 DS 4 VDS / V Fig.2. Normalised continuous drain current. ID% = 100⋅ID/ID 25 ˚C = f(Tmb); conditions: VGS ≥ 10 V 1000 0 30 100 us VGS / V = 20 1 ms 10 1 10 ms 100 ms 1 10 VDS / V 10 0 100 12 0 20 40 60 80 16 100 ID / A Fig.3. Safe operating area. Tmb = 25 ˚C ID & IDM = f(VDS); IDM single pulse; parameter tp December 1997 8 10 Fig.6. Typical on-state resistance, Tj = 25 ˚C. RDS(ON) = f(ID); parameter VGS 4 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET BUK7514-30 ID / A 7514-30 100 5 BUK759-60 max. Tj / C = 25 80 VGS(TO) / V 4 175 typ. 60 3 40 2 20 1 min. 0 0 2 4 6 8 0 -100 10 -50 0 50 Tj / C VGS / V Fig.7. Typical transfer characteristics. ID = f(VGS) ; conditions: VDS = 25 V; parameter Tj 200 Sub-Threshold Conduction 1E-01 30 1E-02 Tj / C = 25 20 150 Fig.10. Gate threshold voltage. VGS(TO) = f(Tj); conditions: ID = 1 mA; VDS = VGS 7514-30 gfs / S 100 175 2% 1E-03 typ 98% 1E-04 10 1E-05 0 0 20 40 ID / A 60 80 1E-06 Fig.8. Typical transconductance, Tj = 25 ˚C. gfs = f(ID); conditions: VDS = 25 V a 1 2 3 4 5 Fig.11. Sub-threshold drain current. ID = f(VGS); conditions: Tj = 25 ˚C; VDS = VGS C / pF 30V TrenchMOS 2 0 7514-30 10000 1.5 Ciss 1 1000 Coss 0.5 Crss 0 -100 -50 0 50 Tj / C 100 150 100 0.1 200 10 100 VDS / V Fig.9. Normalised drain-source on-state resistance. a = RDS(ON)/RDS(ON)25 ˚C = f(Tj); ID = 25 A; VGS = 10 V December 1997 1 Fig.12. Typical capacitances, Ciss, Coss, Crss. C = f(VDS); conditions: VGS = 0 V; f = 1 MHz 5 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET 10 BUK7514-30 VGS / V 7514-30 120 WDSS% 110 100 8 VDS / V = 6 90 24 80 6 70 60 50 4 40 30 2 20 10 0 0 0 10 20 QG / nC 30 20 40 Fig.13. Typical turn-on gate-charge characteristics. VGS = f(QG); conditions: ID = 69 A; parameter VDS 100 IF / A 40 60 80 100 120 Tmb / C 140 160 180 Fig.15. Normalised avalanche energy rating. WDSS% = f(Tmb); conditions: ID = 35 A 7514-30 VDD + L 80 VDS 60 Tj / C = 175 25 - VGS -ID/100 40 0 20 0 T.U.T. R 01 shunt RGS 0 0.5 1 VSDS / V 1.5 2 Fig.16. Avalanche energy test circuit. WDSS = 0.5 ⋅ LID2 ⋅ BVDSS /(BVDSS − VDD ) Fig.14. Typical reverse diode current. IF = f(VSDS); conditions: VGS = 0 V; parameter Tj + VDD RD VDS - VGS 0 RG T.U.T. Fig.17. Switching test circuit. December 1997 6 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET BUK7514-30 MECHANICAL DATA Dimensions in mm 4,5 max Net Mass: 2 g 10,3 max 1,3 3,7 2,8 5,9 min 15,8 max 3,0 max not tinned 3,0 13,5 min 1,3 max 1 2 3 (2x) 0,9 max (3x) 2,54 2,54 0,6 2,4 Fig.18. SOT78 (TO220AB); pin 2 connected to mounting base. Notes 1. Observe the general handling precautions for electrostatic-discharge sensitive devices (ESDs) to prevent damage to MOS gate oxide. 2. Refer to mounting instructions for SOT78 (TO220) envelopes. 3. Epoxy meets UL94 V0 at 1/8". December 1997 7 Rev 1.100 Philips Semiconductors Product specification TrenchMOS transistor Standard level FET BUK7514-30 DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1997 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. December 1997 8 Rev 1.100