SNAP-IN ALUMINUM ELECTROLYTIC CAPACITORS MXH MXH UPGRADE SERIES 105℃ Miniaturized, Snap-in Terminal Type ◆FEATURES ・Load Life : 105℃ 2000 hours. ・Smaller size than MXG series. ・RoHS compliance. ◆SPECIFICATIONS Items Characteristics Category Temperature Range −25〜＋105℃ Rated Voltage Range 400〜500Vdc ±20％ （20℃， 120Hz） Capacitance Tolerance I＝3 CV (After 5 minutes application of rated voltage) Leakage Current(MAX) I＝Leakage Current(μA) C＝Capacitance(μF) V＝Rated Voltage(Vdc) Rated Voltage 120Hz） 400〜450 475〜500（20℃， (Vdc) tanδ 0.20 0.25 (tanδ) Dissipation Factor(MAX) After applying rated voltage with rated ripple current for 2000 hours at 105℃, the capacitors shall meet the following requirements. Endurance Capacitance Change Within ±20％ of the initial value. Dissipation Factor Not more than 200％ of the specified value. Leakage Current Not more than the specified value. Rated Voltage 400〜450 (Vｄｃ) Z （−25℃） /Z （20℃） 8 Low Temperature Stability Impedance Ratio(MAX) 475〜500 （120Hz） 12 ◆MULTIPLIER FOR RIPPLE CURRENT Frequency （Hz） 係 数 Coefficient 60(50) 120（100） 300 0.80 1.00 1.15 500 1k 10k≦ 1.20 1.25 1.40 ◆PART NUMBER □□□ MXH □□□□□ M □□□ SN D×L Rated Voltage Series Capacitance Capacitance Tolerance Option Terminal Code Case Size ◆DIMENSIONS ◆OPTION Code PET Sleeve without plate ●SN［4(3.5)mm］terminal type （mm） Terminal code : SN(Tin plating) EFC SLEEVE （PET） VENT 2-φ2 NEGATIVE L±2 ※ 4±0.5 10 φD±1 10±0.1 φD±1 MOUNTING HOLES ※For φ35, 3.5±0.5 SNAP-IN ALUMINUM ELECTROLYTIC CAPACITORS MXH ◆STANDARD SIZE Vdc φD Cap(μF) 400 φ22 φ25 420 φ30 φ35 φ22 100 φ25 φ30 φ35 22×25 0.85 120 22×25 0.92 22×30 0.98 150 22×30 1.08 22×30 1.06 25×25 1.04 180 22×30 1.15 25×25 1.12 22×35 1.20 25×30 1.20 220 22×35 1.32 25×30 1.30 22×40 1.37 25×30 1.28 30×25 1.24 270 22×40 1.50 25×35 1.49 30×25 1.33 22×50 1.62 25×35 1.47 30×30 1.44 35×25 1.32 330 22×50 1.76 25×40 1.68 30×30 1.55 35×25 1.44 22×60 1.87 25×45 1.75 30×35 1.65 35×30 1.56 390 22×55 1.94 25×45 1.86 30×35 1.75 35×30 1.63 25×50 1.93 30×40 1.84 35×30 1.62 470 25×50 2.07 30×40 1.97 35×30 1.68 25×60 2.21 30×45 2.05 35×35 1.86 560 25×60 2.37 30×45 2.18 35×35 1.92 30×50 2.25 35×40 2.10 680 30×50 2.41 35×40 2.15 30×60 2.59 35×45 2.29 820 30×60 2.76 35×45 2.37 35×50 2.50 1000 35×55 2.78 35×60 2.88 1200 35×60 2.95 Vdc φD Cap(μF) 450 φ22 φ25 475 φ30 φ35 φ22 68 φ25 φ30 φ35 22×25 0.67 82 22×30 0.77 100 22×25 0.85 22×35 0.88 25×25 0.83 120 22×30 0.98 25×25 0.96 22×40 0.99 25×30 0.96 150 22×35 1.13 25×30 1.12 22×45 1.14 25×35 1.10 30×25 1.04 180 22×40 1.28 25×30 1.20 30×25 1.18 22×50 1.27 25×40 1.24 30×30 1.19 35×25 1.15 220 22×45 1.44 25×35 1.37 30×30 1.36 22×60 1.47 25×45 1.40 30×35 1.36 35×30 1.33 270 22×50 1.61 25×40 1.56 30×30 1.44 35×25 1.33 25×55 1.62 30×40 1.54 35×35 1.52 330 22×60 1.86 25×50 1.82 30×35 1.64 35×30 1.54 30×45 1.73 35×40 1.71 390 25×55 2.01 30×40 1.83 35×35 1.76 30×55 1.98 35×40 1.79 470 25×60 2.21 30×45 2.05 35×40 1.97 30×60 2.18 35×50 2.09 560 30×50 2.26 35×45 2.18 680 30×60 2.59 35×50 2.38 820 35×60 2.74 Vdc 500 φD Cap(μF) φ22 56 22×25 0.63 68 22×30 0.72 82 22×35 0.82 25×25 0.78 100 22×40 0.93 25×30 0.90 120 22×45 1.05 25×35 1.02 30×25 0.97 150 22×50 1.20 25×40 1.17 30×30 1.13 35×25 1.09 180 22×60 1.37 25×45 1.31 30×35 1.28 35×30 1.26 220 25×50 1.46 30×40 1.45 35×35 1.44 270 25×60 1.70 30×45 1.63 35×35 1.52 330 30×50 1.81 35×40 1.71 390 30×60 2.06 35×50 1.99 470 φ25 φ30 φ35 35×55 2.19 Ripple Current (A r.m.s./120Hz, 105℃) Case Size φD×L(mm) 35×55 2.29