ON NB3N6200C Spread spectrum emi reduction ic for hd display Datasheet

NB3N6200C
2.5V/3.3V, Spread Spectrum
EMI Reduction IC for HD
Display
Description
NB3N6200C is a versatile spread spectrum modulator designed
specifically for a wide range of clock frequencies. The device
addresses the need of a low EMI clock generator for use in display
systems covering wide choice of pixel frequencies.
NB3N6200C reduces electromagnetic interference (EMI) at the
clock source, allowing system wide reduction of EMI of all clock
dependent signals. NB3N6200C allows significant system cost
savings by reducing the number of circuit board layers, ferrite beads,
shielding that are traditionally required to pass EMI regulations.
The Supply Voltage of the device is 3.3 V/2.5 V. It has two Spread
Selection Pins, SS1% and SS2% to select among the four possible
deviation options. The Frequency Deviation across the Frequency
range remains within ±10% of the selected deviation. Refer to the
Frequency Deviation Selection Table for details. The device is
available in a 6 Pin TSOT23 Package, over Commercial, Industrial
and Extended Industrial temperature range.
www.onsemi.com
MARKING
DIAGRAM
TSOT23 6−Lead
CASE 419AZ
1
620AYWG
G
1
620
A
Y
W
G
= Specific Device Code
=Assembly Location
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
PIN CONFIGURATION
Features
• Wide Operating Frequency Range Covering Most of the Pixel
•
•
•
•
•
•
•
•
•
Frequencies
Generates a Low EMI 1x Output
Frequency Range: 25 MHz − 120 MHz
Four Frequency Deviation Selection Options:
±1.50%, ±1.25%, ±0.75%, ±1.00%
Supply Voltage: 3.3 V ± 0.3 V
Supply Voltage: 2.5 V ± 0.125 V
ModRate 85 kHz @ 72 MHz
Industrial and Extended Industrial Temperature Range
TSOT23 6−Lead Package
Replacement for PCS3I6200AG−06JR, with the same die
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
1
CLKIN
VDD
VSS
SS2%
ModOUT
SS1%
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
Application
NB3N6200C is used as Low EMI Clock Generator for Display
Systems including Liquid Crystal and Plasma Displays.
© Semiconductor Components Industries, LLC, 2015
January, 2015 − Rev. 1
1
Publication Order Number:
NB3N6200C/D
NB3N6200C
VDD
SS1%
SS2%
ModOUT
CLKIN
PLL
VSS
Figure 1. Block Diagram
Table 1. PIN DESCRIPTION
Pin#
Pin Name
Type
Description
1
CLKIN
I
External Reference Clock Input.
2
VSS
P
Ground to entire chip.
3
ModOUT
O
Modulated Frequency Output.
4
SS1%
I
Frequency Deviation Selection. Refer to Frequency Deviation Selection Table for details.
Has an Internal pull−up resistor.
5
SS2%
I
Frequency Deviation Selection. Refer to Frequency Deviation Selection Table for details.
Has an Internal pull−up resistor.
6
VDD
P
Power to entire chip.
Table 2. FREQUENCY DEVIATION SELECTION TABLE
SS2%
SS1%
Frequency Deviation
L
L
±1.50%
L
H
±1.25%
H
L
±0.75%
H
H
±1.00%
Table 3. ABSOLUTE MAXIMUM RATINGS
Symbol
VDD, VIN
Parameter
Rating
Unit
Voltage on any pin with respect to Ground
−0.5 to +4.6
V
Storage temperature
−65 to +125
°C
Ts
Max. Soldering Temperature (10 sec)
260
°C
TJ
Junction Temperature
150
°C
2
KV
TSTG
TDV
Static Discharge Voltage (As per JEDEC STD22− A114−B)
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
www.onsemi.com
2
NB3N6200C
Table 4. RECOMMENDED OPERATING CONDITIONS
Parameter
VDD(2.5)
Description
Supply Voltage
VDD(3.3)
TA
CL
Operating Temperature
Min
Max
Unit
2.375
2.625
V
3.0
3.6
0
+70
Commercial
Industrial
−40
+85
Extended Industrial
−40
+105
Load Capacitance
15
°C
pF
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
Table 5. DC ELECTRICAL CHARACTERISTICS FOR 2.5 V + 0.125 V, VSS = 0 V = GND
Symbol
Max
Unit
VIL
Input low voltage
Parameter
VSS − 0.3
Min
Typ
0.7
V
VIH
Input high voltage
1.7
VDD + 0.3
V
IIL
Input low current
−35
mA
IIH
Input high current
35
mA
VOL
Output low voltage (VDD = 2.5 V, IOL = 8 mA)
0.6
V
VOH
Output high voltage (VDD = 2.5 V, IOH = −8 mA)
IDD
Static supply current (Note 1)
4
mA
ICC
Dynamic supply current, Unloaded Output
9
11
mA
VDD
Operating voltage
2.5
2.625
V
tON
Power−up time (first locked cycle after power−up)
3
mS
CIN
Input Capacitance
5
pF
ZOUT
Output Impedance
40
W
1.8
V
2.375
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. CLKIN pin is pulled low.
Table 6. AC ELECTRICAL CHARACTERISTICS FOR 2.5 V + 0.125 V, VSS = 0 V = GND
Symbol
CLKIN
ModOUT
Parameter
Min
Input frequency
25
Output frequency
25
Typ
Max
Unit
120
MHz
120
MHz
tLH (Note 2)
Output rise time (measured from 0.7 V to 1.7 V)
2
2.7
nS
tHL (Note 2)
Output fall time (measured from 1.7 V to 0.7 V)
1
1.5
nS
±250
±300
pS
50
60
%
tJC
Jitter (Cycle−to−cycle)
tD
Output duty cycle
40
2. tLH and tHL are measured into a capacitive load of 15 pF.
www.onsemi.com
3
NB3N6200C
Table 7. DC ELECTRICAL CHARACTERISTICS FOR 3.3 V + 0.3 V, VSS = 0 V = GND
Symbol
Parameter
Min
Typ
Max
Unit
VIL
Input low voltage
VSS − 0.3
0.8
V
VIH
Input high voltage
2.0
VDD + 0.3
V
IIL
Input low current
−35
mA
IIH
Input high current
35
mA
VOL
Output low voltage (VDD = 3.3 V, IOL = 8 mA)
0.4
V
VOH
Output high voltage (VDD = 3.3 V, IOH = −8 mA)
IDD
Static supply current (Note 3)
ICC
Dynamic supply current, Unloaded Output
VDD
Operating voltage
2.5
V
3.0
4.5
mA
11
14
mA
3.3
3.6
V
3
mS
tON
Power−up time (first locked cycle after power−up)
CIN
Input Capacitance
5
pF
ZOUT
Output Impedance
35
W
3. CLKIN pin is pulled low.
Table 8. AC ELECTRICAL CHARACTERISTICS FOR 3.3 V + 0.3 V, VSS = 0 V = GND (Note 5)
Symbol
CLKIN
ModOUT
Parameter
Min
Typ
Max
Unit
Input frequency
25
120
MHz
Output frequency
25
120
MHz
tLH (Note 4)
Output rise time (measured from 0.8 V to 2.0 V)
1.3
2
nS
tHL (Note 4)
Output fall time (measured at 2.0 V to 0.8 V)
0.9
1.3
nS
±225
±300
pS
50
55
%
tJC
Jitter (Cycle−to−cycle)
tD
Output duty cycle
45
4. tLH and tHL are measured into a capacitive load of 15 pF.
5. All parameters are at an Extended Industrial temperature range unless otherwise stated.
Table 9. ORDERING INFORMATION
Part Number
NB3N6200CSNT1G
Marking
Temperature
Package Type
Shipping
620
−40°C to +85°C
TSOT23
(Pb−Free)
3000 / Tape & Reel
www.onsemi.com
4
NB3N6200C
PACKAGE DIMENSIONS
TSOT23 6−Lead
CASE 419AZ
ISSUE O
0.20
M
3X
b2
C A
S
A
D
B
S
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DATUM C IS THE SEATING PLANE.
B
6
5
L2
GAGE
PLANE
4
DIM
A
A1
A2
b
b2
c
D
E
E1
e
L
L2
E1
E
1
2
3
L
b
0.20
C
DETAIL A
SEATING
PLANE
3X
e
M
C A
S
B
S
TOP VIEW
A2
c
A
6X
MILLIMETERS
MIN
MAX
−−−
1.00
0.00
0.10
0.80
0.90
0.30
0.45
0.25
0.35
0.12
0.20
2.80
3.00
2.70
2.90
1.50
1.70
0.95 BSC
0.30
0.50
0.25 BSC
0.10 C
A1
SIDE VIEW
C
DETAIL A
SEATING
PLANE
END VIEW
RECOMMENDED
SOLDERING FOOTPRINT*
6X
3.30
6X
0.85
0.56
0.95
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NB3N6200C/D
Similar pages