HD74LVC08 Quad. 2-input AND Gates REJ03D0344–0300Z (Previous ADE-205-063B (Z)) Rev.3.00 Jul. 22, 2004 Description The HD74LVC08 has four 2-input AND gates in a 14 pin package. Low voltage and high speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • • • • • • VCC = 2.0 V to 5.5 V All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High output current ±24 mA (@VCC = 3.0 V to 5.5 V) Ordering Information Part Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) HD74LVC08FPEL HD74LVC08TELL SOP–14 pin (JEITA) TSSOP–14 pin FP–14DAV TTP–14DV FP T EL (2,000 pcs/reel) ELL (2,000 pcs/reel) Note: Please consult the sales office for the above package availability. Function Table Inputs A B Output Y L H L H L L H H L L L H H: L: High level Low level Rev.3.00 Jul. 22, 2004 page 1 of 5 HD74LVC08 Pin Arrangement 14 VCC 1A 1 1B 2 13 4B 1Y 3 12 4A 2A 4 11 4Y 2B 5 10 3B 2Y 6 9 3A GND 7 8 3Y (Top view) Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage range Input diode current Input voltage Output diode current VCC IIK VI IOK V mA V mA Output voltage Output current VCC, GND current / pin Storage temperature VO IO ICC or IGND Tstg –0.5 to 6.0 –50 –0.5 to 6.0 –50 50 –0.5 to VCC+0.5 ±50 100 –65 to +150 Conditions VI = –0.5 V VO = –0.5 V VO = VCC+0.5 V V mA mA °C Note: The absolute maximum ratings are values, which must not individually be exceeded, and furthermore, no two of which may be realized at the same time. Recommended Operating Conditions Item Symbol Ratings Unit Conditions Supply voltage VCC V Input / Output voltage VI VO 1.5 to 5.5 2.0 to 5.5 0 to 5.5 Data retention At operation A, B Y Operating temperature Output current Ta IOH IOL Input rise / fall time*1 tr, tf 0 to VCC –40 to 85 –12 –24*2 12 24*2 10 V °C mA mA ns/V Notes: 1. This item guarantees maximum limit when one input switches. Waveform: Refer to test circuit of switching characteristics. 2. Duty cycle ≤ 50% Rev.3.00 Jul. 22, 2004 page 2 of 5 VCC = 2.7 V VCC = 3.0 V to 5.5 V VCC = 2.7 V VCC = 3.0 V to 5.5 V HD74LVC08 Electrical Characteristics Ta = –40 to 85°C Item Symbol VCC (V) Min Max Unit Input voltage VIH 2.7 to 3.6 4.5 to 5.5 2.7 to 3.6 4.5 to 5.5 2.7 to 5.5 2.7 3.0 3.0 4.5 2.7 to 5.5 2.7 3.0 4.5 0 to 5.5 5.5 3.0 to 3.6 2.0 VCC×0.7 — — VCC–0.2 2.2 2.4 2.0 3.8 — — — — — — — — — 0.8 VCC×0.3 — — — — — 0.2 0.4 0.55 0.55 ±5.0 20 500 V VIL Output voltage VOH VOL Input current Quiescent supply current IIN ICC ∆ICC Test Conditions V V V µA µA µA IOH = –100 µA IOH = –12 mA IOH = –12 mA IOH = –24 mA IOH = –24 mA IOL = 100 µA IOL = 12 mA IOL = 24 mA IOL = 24 mA VIN = 5.5 V or GND VIN = VCC or GND VIN = one input at (VCC–0.6)V, other inputs at VCC or GND Switching Characteristics Item Symbol VCC (V) Min Typ Max Unit From (Input) To (Output) Propagation delay time tPLH tPHL 4.5 3.5 2.5 3.0 15.0 7.0 6.0 5.0 — — A or B Y CIN CO — 1.5 — — — ns Input capacitance Output capacitance 2.7 3.3±0.3 5.0±0.5 2.7 2.7 Ta = –40 to 85°C pF pF Test Circuit Input VCC VCC Pulse Generator Output Zout = 50 Ω CL = 50 pF Note: 1. CL includes probe and jig capacitance. Rev.3.00 Jul. 22, 2004 page 3 of 5 450 Ω 50 Ω Scope HD74LVC08 Waveforms tr Input A or B tf 90 % Vref VIH 90 % Vref 10 % 10 % GND t PHL t PLH VOH Output Y Vref Vref VOL TEST VIH Vref Notes: 1. tr = 2.5 ns, tf = 2.5 ns 2. Input waveform : PRR = 10 MHz, duty cycle 50%. Rev.3.00 Jul. 22, 2004 page 4 of 5 VCC = 2.7 V, 3.3±0.3 V VCC = 5.0±0.5 V 2.7 V VCC 1.5 V 50%VCC HD74LVC08 Package Dimensions As of January, 2003 Unit: mm 10.06 10.5 Max 8 5.5 14 1 2.20 Max *0.20 ± 0.05 7 1.42 Max *0.40 ± 0.06 1.15 0˚ – 8˚ 0.10 ± 0.10 1.27 0.20 7.80 +– 0.30 0.70 ± 0.20 0.15 0.12 M Package Code JEDEC JEITA Mass (reference value) *Ni/Pd/Au plating FP-14DAV — Conforms 0.23 g As of January, 2003 Unit: mm 4.40 5.00 5.30 Max 14 8 1 7 0.65 1.0 *0.20 ± 0.05 0.13 M 6.40 ± 0.20 *Ni/Pd/Au plating Rev.3.00 Jul. 22, 2004 page 5 of 5 0.07 +0.03 –0.04 0.10 *0.15 ± 0.05 1.10 Max 0.83 Max 0˚ – 8˚ 0.50 ± 0.10 Package Code JEDEC JEITA Mass (reference value) TTP-14DV — — 0.05 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0