Signal Relays Potter & Brumfield JWD/JWS Series Reed Relays n n n n n JWD has dual in-line package (DIP) configuration (14-pin DIP) JWS has single in-line package (SIP) configuration Low cost, dry reed reliability with various contact arrangements Wave solderable and immersion cleanable molded epoxy package Optional coil suppression diode Typical applications Telecommunications, measurement and control, automated test equipment, security systems, medical equipment. UC Approvals Coil Data UL E29244, CSA LR81479 Technical data of approved types on request Contact Data Contact arrangement JWD and JWS 1 form A (NO) contact JWD only 1 form B (NC), 1 form C (CO), 2 form A (NO) Rated voltage 1 form A, 1 form B and 2 form A 20VDC, 500mA 1 form C (CO) 10 VDC, 500mA and 10VDC, 10mA Max. switching voltage 1 form A, 1 form B and 2 form A 100VDC 1 form C (CO) 28VDC Rated current 1 form A, 1 form B and 2 form A 500mA, 20VDC 1 form C (CO) 500mA, 10VDC Limiting making current 500mA Limiting breaking current 500mA Switching power form A (NO) and form B (NC) 10W form C (CO) 3W Contact material Ruthenium Min. recommended contact load 10mV, 10mA Minimum switching voltage 10mV Initial contact resistance 200mΩ max. at 10mA, 6VDC Frequency of operation 100Hz Operate/release time max., incl. bounce form A (NO) and form B (NC) 1.5/0.5ms form C (CO) 1.5/3.0ms Electrical endurance form A (NO) and form B (NC), resistive load, +25°C 20VDC, 500mA 1x106 ops. 20VDC, 250mA 20x106 ops. 5VDC, 1mA 100x106 ops. form C (CO) contact, resistive load, +25°C 10VDC, 500mA 1x106 ops. 10VDC, 250mA 20x106 ops. 5VDC, 1mA 100x106 ops. Contact ratings 1 form A, 1 form B and 2 form A 500mA, 20VDC 1 form C (CO) 500mA, 10VDC Mechanical endurance 100x106 operations 07-2012, Rev. 0712 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Coil voltage range Min./Max. energization duration Max. coil temperature Thermal resistance Coil insulation system according UL 5 to 24VDC continuous 105º C approximately 100ºC/W class A Insulation Data Initial dielectric strength between open contacts form A (NO) and form B (NC) form C (CO) between contact and coil between adjacent contacts 2 form A (NO) of JWD only Initial insulation resistance between insulated elements Capacitance between open contacts 250VDC, 175VDC 500VDC 500VDC 1010Ω at 100VDC typ. 0.5pF Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -35ºC to +85ºC Category of environmental protection IEC 61810 RTIII -wash tight Vibration resistance (functional) 20g, 10 to 2000 Hz Shock resistance (functional), 3 planes, half sine pulse, 8ms form A (NO) 100g form B (NC) and form C (CO) 50g Terminal type PCB-THT Mounting position any Weight approximately 2.3g ( 0.08 oz.) Resistance to soldering heat THT IEC 60068-2-20, wave solder max. 260ºC/10s Ultrasonic cleaning no Conformal coating yes Packaging/unit tray/50 pcs., bundle/250 pcs., box/500 pcs. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change. 1 Signal Relays Potter & Brumfield JWD/JWS Series Reed Relays (Continued) Dimensions Terminal assignment TOP view on component side of PCB Dia. 1 Dia. 2 Dia. 3 Dia. 4 7 6 +2 1 7 6 +2 1 7 6 +2 1 7 6 8 9 13 14 8 9 13 14 8 9 13 14 8 9 7 6 +2 1 JWD Series +2 1 MAGNET 7 13 14 .130 ± .015 (3.3 ± 0.4) 1 2 13 14 8 9 6 7 21 .100 TYP. (2.54) 8 9 .300 MAX. (7.62) .770 MAX. (19.56) 1314 1 +3 5 .315 (8.0) MAX. WITH TERMINALS VERTICAL .020 TYP. (.51) .600 (15.24) 4° MAX. TYP. 7 Dia. 5 Dia. 6 Dia. 7 Note: Terminal numbers are for reference only and do not appear on relays. .012 TYP. (.3) JWS Series .260 MAX. (6.6) .800 MAX. (20.32) .307 MAX. (7.8) 1 Note: Magnetic shielding may be required between relays when they are placed in very close proximity to one another. Product code Contacts Max. Diode rating 07-2012, Rev. 0712 www.te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. JWD-107-1 1 form A, 10W JWD-107-5 1 NO contact JWD-107-3 JWD-107-7 JWD-171-5 JWD-171-10 JWD-171-21 2 form A, JWD-171-25 2 NO contacts JWD-171-23 JWD-171-27 JWD-171-24 JWD-171-28 JWD-171-12 1 form B, JWD-171-17 1 NCO contact JWD-171-14 JWD-171-19 JWD-171-15 JWD-171-20 JWD-172-1 1 form C, 3W JWD-172-5 1 CO contact JWD-172-3 JWD-172-7 JWD-172-4 JWD-172-8 JWD-172-155 JWD-172-159 JWD-172-161 JWD-172-158 JWD-172-162 JWS-117-1 1 form A, 10W JWS-117-6 1 NO contact JWS-117-3 JWS-117-8 JWS-117-18 JWS-117-5 1) Coil resistance ±10%. 2 No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes No Yes Yes No Yes No Yes No Yes Yes No 3 7 500ohm 500ohm 1200ohm 1200ohm 2150ohm 2150ohm 200ohm 200ohm 500ohm 500ohm 2200ohm 2200ohm 500ohm 500ohm 1200ohm 1200ohm 2200ohm 2200ohm 200ohm 200ohm 500ohm 500ohm 2200ohm 2200ohm 200ohm 200ohm 1000ohm 2150ohm 2150ohm 500ohm 500ohm 530ohm 530ohm 1850ohm 2150ohm 3.8VDC 3.8VDC 9.6VDC 9.6VDC 19.2VDC 19.2VDC 3.8VDC 3.8VDC 9.6VDC 9.6VDC 19.2VDC 19.2VDC 3.8VDC 3.8VDC 9.6VDC 9.6VDC 19.2VDC 19.2VDC 3.8VDC 3.8VDC 9.6VDC 9.6VDC 19.2VDC 19.2VDC 3.8VDC 3.8VDC 9.6VDC 19.2VDC 19.2VDC 3.8VDC 3.8VDC 9.6VDC 9.6VDC 9.6VDC 19.2VDC Coil power 50/72mW 50/72mW 120mW 120mW 268mW 268mW 125/180mW 125/180mW 288mW 288mW 262mW 262mW 50/72mW 50/72mW 120mW 120mW 262mW 262mW 125/180mW 125/180mW 288mW 288mW 262mW 262mW 125/180mW 125/180mW 144mW 268mW 268mW 50mW 50mW 272mW 272mW 78mW 268mW Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions .010 TYP. (.25) .125 ± .010 (3.18 ± .254) .200 TYP. (5.08) Coil Coil Operate voltage resistance1) voltage 5/6VDC 5/6VDC 12VDC 12VDC 24VDC 24VDC 5/6VDC 5/6VDC 12VDC 12VDC 24VDC 24VDC 5/6VDC 5/6VDC 12VDC 12VDC 24VDC 24VDC 5/6VDC 5/6VDC 12VDC 12VDC 24VDC 24VDC 5/6VDC 5/6VDC 12VDC 24VDC 24VDC 5VDC 5VDC 12VDC 12VDC 12VDC 24VDC 5 .018 TYP. (.46) .020 TYP. (.51) Wiring diagram 1 1 1 1 2 2 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 5 6 6 6 6 6 7 7 7 7 7 7 Part number 1393771-3 1393771-5 1393771-4 1393771-6 2-1393771-0 1393771-7 1-1393771-4 1-1393771-7 1-1393771-5 1-1393771-8 1-1393771-6 1-1393771-9 1393771-8 1-1393771-1 1393771-9 1-1393771-2 1-1393771-0 1-1393771-3 2-1393771-1 2-1393771-9 2-1393771-7 3-1393771-0 2-1393771-8 3-1393771-1 2-1393771-2 2-1393771-4 2-1393771-5 2-1393771-3 2-1393771-6 3-1393771-2 3-1393771-8 3-1393771-4 3-1393771-6 3-1393771-3 3-1393771-5 Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.