HP HDSP-U103 8 mm (0.31 inch) ultra mini seven segment display Datasheet

8 mm (0.31 inch) Ultra Mini
Seven Segment Displays
HDSP-U1xx Series
HDSP-U2xx Series
HDSP-U3xx Series
HDSP-U4xx Series
HDSP-U5xx Series
Technical Data
Features
• Compact Package
• 8 mm (0.31 inch) Character
Height
• Choice of Colors
Wide Range of Colors
• Excellent Appearance
Evenly Lighted Segments
Mitered Corners on Segments
Gray/Black Surface Gives
Optimum Contrast
± 50° Viewing Angle
• Design Flexibility
Common Anode or Common
Cathode
Right Hand Decimal Point
• Categorized for Luminous
Intensity
Yellow and Green also
Categorized for Color
Use of Like Categories Yields
a Uniform Display
• High Light Output
• High Peak Current
• Excellent for Long Digit
String Multiplexing
• Intensity and Color
Selection Option
Description
The 8 mm (0.31 inch) LED seven
segment displays are Agilent’s
most space-efficient character
size. They are designed for
viewing distances up to 3 metres
(10 feet). The numeric devices
feature a right hand decimal
point. All devices are available as
either common anode or common
cathode.
Typical applications include
appliances, temperature controllers, and digital panel meters.
Devices
AlGaAs Red
HDSP-
HER
HDSP-
Orange
HDSP-
Yellow
HDSP-
Green
HDSP-
U101
U201
U401
U301
U501
Common Anode, Right
Hand Decimal, Gray Surface
A
U103
U203
U403
U303
U503
Common Cathode, Right
Hand Decimal, Gray Surface
B
U111
U211
U411
U311
U511
Common Anode, Right
Hand Decimal, Black Surface
A
U113
U213
U413
U313
U513
Common Cathode, Right
Hand Decimal, Black Surface
B
Description
Circuit
Diagram
2
Part Numbering System
5 0 8 2 - x xx x - x x x xx
HDSP - x xx x - x x x xx
Mechanical Options[1]
00: No mechanical option
36: Special dimensional tolerances
Color Bin Options[1,2]
0: No color bin limitation
Maximum Intensity Bin[1,2]
0: No maximum intensity bin limitation
Minimum Intensity Bin[1,2]
0: No minimum intensity bin limitation
Device Configuration/Color[1]
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to respective data sheet
Package[1]
U: 8 mm (0.31 inch) Ultra Mini Single Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Agilent representative
for details.
2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube
(exceptions may apply). Please refer to respective data sheet for specific bin limit information.
3
Package Dimensions
COLOR BIN
NOTE NO. 3
LUMINOUS
INTENSITY
CATEGORY
10°
1.0
(0.039)
2
8.0
(0.315)
f
9
b
g
3
4
10
a
e
5.5
11.0 ± 0.2
(0.217) (0.433 ± 0.008)
HDSP-XXXX
XYY
ZW
1
0.5
(0.020)
8
c
d
DP
7
8.0
(0.315)
2.0
(0.079)
6
5
DATE CODE
2.0
(0.079)
4.0
(0.157)
0.7
(0.028)
2.5
(0.098)
5.0
(0.197)
7.1
(0.280)
MAX.
4.5 MIN.
(0.177)
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.
3. FOR YELLOW AND GREEN SERIES PRODUCT ONLY.
0.25
(0.010)
5.3
(0.209)
Internal Circuit Diagram
1
10
1
10
2
9
2
9
3
8
3
8
4
7
4
7
5
6
5
6
A
B
FUNCTION
PIN
A
B
1
2
3
4
5
6
7
8
9
10
CATHODE a
CATHODE f
CATHODE g
CATHODE e
CATHODE d
CATHODE DP
ANODE DP
CATHODE c
ANODE
CATHODE b
ANODE a
ANODE f
ANODE g
ANODE e
ANODE d
CATHODE DP
ANODE DP
ANODE c
CATHODE
ANODE b
HDSP-UXXX CIRCUIT
4
Absolute Maximum Ratings
Description
AlGaAs Red
HDSPU1xx
Series
HER/Orange
HDSPU2xx/-4xx
Series
Yellow
HDSPU3xx
Series
Green
HDSPU5xx
Series
Units
Average Power per Segment or DP
37
105
80
105
mW
Peak Forward Current per
Segment or DP
45[1]
90[3]
60[5]
90[7]
mA
DC Forward Current per Segment
or DP
15[2]
30[4]
20[6]
30[8]
mA
Operating Temperature Range
–20 to +90
°C
–25 to +90
Storage Temperature Range
°C
–30 to +90
Reverse Voltage per Segment or DP
3.0
V
Wavesoldering Temperature for
3 Seconds (1.60 mm [0.063 in.]
below body)
250
°C
Notes:
1. See Figure 1 to establish pulsed conditions.
2. No derating over specified temperature range.
3. See Figure 5 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C (see Figure 8).
5. See Figure 6 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C (see Figure 8).
7. See Figure 7 to establish pulsed conditions.
8. Derate above 39°C at 0.37 mA/°C (see Figure 8).
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device
Series
HDSPU1xx
Parameter
Luminous Intensity/Segment[1,2]
(Digit Average)
Symbol
IV
Forward Voltage/Segment or DP
VF
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
Temperature Coefficient of
VF/Segment or DP
Thermal Resistance LED
Junction-to-Pin
λPEAK
λd
VR
∆VF /°C
RθJ-Pin
Min.
315
3.0
Typ.
600
3600
1.6
1.7
1.8
645
637
15
-2
255
Max.
Units
µcd
V
2.2
nm
nm
V
mV/°C
°C/W/
Seg
Test
Conditions
IF = 1 mA
IF = 5 mA
IF = 1 mA
IF = 5 mA
IF = 20 mA
IR = 100 µA
5
Electrical/Optical Characteristics at TA = 25°C, continued
High Efficiency Red
Device
Series
Parameter
HDSPLuminous Intensity/Segment[1,2]
U2xx
(Digit Average)
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
Temperature Coefficient of
VF/Segment or DP
Thermal Resistance LED
Junction-to-Pin
Orange
Device
Series
HDSPU4xx
Parameter
Luminous Intensity/Segment[1,2]
(Digit Average)
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
Temperature Coefficient of
VF/Segment or DP
Thermal Resistance LED
Junction-to-Pin
Symbol
IV
Min.
360
VF
λPEAK
λd
VR
∆VF/°C
3.0
RθJ-Pin
Symbol
IV
RθJ-Pin
Max.
Units
µcd
2.5
V
nm
nm
V
mV/°C
Min.
360
3.0
Typ.
980
5390
2.0
600
603
30
-2
200
Test
Conditions
IF = 5 mA
IF = 20 mA
IF = 20 mA
IR = 100 µA
°C/W/
Seg
200
VF
λPEAK
λd
VR
∆VF/°C
Typ.
980
5390
2.0
635
626
30
-2
Max.
Units
µcd
2.5
V
nm
nm
V
mV/°C
°C/W/
Seg
Test
Conditions
IF = 5 mA
IF = 20 mA
IF = 20 mA
IR = 100 µA
6
Yellow
Device
Series
HDSPU3xx
Parameter
Luminous Intensity/Segment[1,2]
(Digit Average)
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3,5]
Reverse Voltage/Segment or DP[4]
Temperature Coefficient of
VF/Segment or DP
Thermal Resistance LED
Junction-to-Pin
High Performance Green
Device
Series
Parameter
HDSPLuminous Intensity/Segment[1,2]
(Digit Average)
U5xx
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3,5]
Reverse Voltage/Segment or DP[4]
Temperature Coefficient of
VF/Segment or DP
Thermal Resistance LED
Junction-to-Pin
Symbol
IV
λPEAK
λd
VR
∆VF/°C
Typ.
480
2740
2.2
583
581.5 586
3.0
50.0
-2
RθJ-Pin
200
VF
Symbol
IV
Min.
225
Min.
860
VF
λPEAK
λd
VR
∆VF/°C
RθJ-Pin
3.0
Typ.
3000
6800
2.1
566
571
50.0
-2
200
Max.
Units
µcd
2.5
V
nm
592.5
nm
V
mV/°C
Test
Conditions
IF = 5 mA
IF = 20 mA
IF = 20 mA
IR = 100 µA
°C/W/
Seg
Max.
Units
µcd
2.5
V
nm
nm
V
mV/°C
Test
Conditions
IF = 10 mA
IF = 20 mA
IF = 10 mA
IR = 100 µA
°C/W/
Seg
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. The Yellow (HDSP-U3XX) series and Green (HDSP-U5XX) series displays are categorized for dominant wavelength. The category is
designated by a number adjacent to the luminous intensity category letter.
7
100
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
10
z
Z
z
H
z
z
H
H
0
30
K
H
H
K
K
0
10
1
3
10
I F PEAK RATIO OF MAXIMUM OPERATING
I DC MAX PEAK CURRENT TO TEMPERATURE
DERATED MAXIMUM DC CURRENT
AlGaAs Red
1
1
10
100
1000
10000
DC OPERATION
t P – PULSE DURATION – µs
160
2.00
140
1.75
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 1. Maximum Tolerable Peak Current vs. Pulse
Duration – AlGaAs Red.
120
AlGaAs RED
100
80
60
40
20
1.25
1.00
AlGaAs RED
0.75
0.50
0.25
0
0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Figure 2. Forward Current vs. Forward Voltage.
1.4
1.2
1.0
0.8
AlGaAs RED
0.6
0.5
1.0
2.0 5.0 10.0 20.0 50.0 150.0
3.0
30.0 100.0
0
5
10
15
20
25
30
35
40
IF – FORWARD CURRENT PER SEGMENT – mA
VF – FORWARD VOLTAGE – V
ηPEAK – NORMALIZED RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 20 mA)
1.50
500.0
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 4. Relative Efficiency (Luminous Intensity per
Unit Current) vs. Peak Current.
Figure 3. Relative Luminous Intensity vs. DC Forward
Current.
8
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
10
I DC MAX – MAXIMUM DC CURRENT
PER SEGMENT – mA
0
30
HER/ORANGE
25
GREEN
20
YELLOW
15
10
5
z
z
0
20
YELLOW
40
HER/ORANGE
20
GREEN
0
5.0
η PEAK – RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 5 mA FOR HER AND
YELLOW AND TO 1 AT 10 mA FOR GREEN)
I F – FORWARD CURRENT PER SEGMENT – mA
60
Figure 9. Forward Current vs.
Forward Voltage Characteristics.
30
40 50
60
70 80
90 100 110 120
T A – AMBIENT TEMPERATURE – °C
80
V F – FORWARD VOLTAGE – V
= 770°C/W
35
10000
100
4.0
J-A
H
H
1000
Figure 7. Maximum Tolerable Peak Current vs. Pulse
Duration – Green.
3.0
10000
40
Figure 8. Maximum Allowable DC Current vs. Ambient
Temperature.
12
10
HER/ORANGE
8
YELLOW
6
4
GREEN
2
0
0
5
10
15
20
25
30
I F – FORWARD CURRENT PER SEGMENT – mA
Figure 10. Relative Luminous
Intensity vs. DC Forward Current.
η PEAK – RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 5 mA FOR HER,
ORANGE AND YELLOW, AND 10 mA FOR GREEN)
0
10
Z
z
z
H
H
H
K
K
K
30
1
3
10
I F PEAK RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
I DC MAX
DERATED DC CURRENT
Rθ
t P – PULSE DURATION – µs
2.0
1000
45
DC OPERATION
1.0
z
H
0
10 z
H
0
30
z
10
100
z
50
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
0
100
Figure 6. Maximum Tolerable Peak Current vs. Pulse
Duration – Yellow.
100
10
H
10
t P – PULSE DURATION – µs
Figure 5. Maximum Tolerable Peak Current vs. Pulse
Duration – HER, Orange.
1
H
DC OPERATION
1
t P – PULSE DURATION – µs
1
K
Z
1
10000
1
H
1000
K
z
DC OPERATION
100
10
K
H
H
Z
10
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
3
K
K
H
1
z
H
0
10 z
H
0
30
z
1
3
K
1
100
10
I F PEAK RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
I DC MAX
DERATED DC CURRENT
100
10
I F PEAK RATIO OF MAXIMUM OPERATING
I DC MAX PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
HER, Orange, Yellow, Green
1.8
YELLOW
1.6
HER/ORANGE
1.4
GREEN
1.2
1.0
0.8
0
20
40
60
80
I PEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 11. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak Current.
100
9
Intensity Bin Limits (mcd)
AlGaAs Red
HDSP-U1xx
IV Bin Category
Min.
E
0.315
F
0.428
G
0.621
H
0.945
I
1.40
J
2.10
K
3.14
L
4.70
Max.
0.520
0.759
1.16
1.71
2.56
3.84
5.75
8.55
HER
HDSP-U2xx
IV Bin Category
Min.
B
0.342
C
0.516
D
0.774
E
1.160
F
1.740
G
2.610
H
3.915
Max.
0.630
0.946
1.418
2.127
3.190
4.785
7.177
Orange
HDSP-U4xx
IV Bin Category
Min.
C
0.443
D
0.554
E
0.692
F
0.856
G
1.082
H
1.352
I
1.692
J
2.114
K
2.641
L
3.300
M
4.127
N
5.157
Max.
0.677
0.846
1.057
1.322
1.652
2.066
2.581
3.227
4.034
5.042
6.303
7.878
10
Electrical/Optical
Yellow
HDSP-U3xx
IV Bin Category
Min.
B
0.229
C
0.317
D
0.476
E
0.714
F
1.073
G
1.609
H
2.413
Max.
0.387
0.582
0.872
1.311
1.967
2.950
4.425
Green
HDSP-U5xx
IV Bin Category
Min.
H
0.86
I
1.29
J
1.94
K
2.90
L
4.37
Max.
1.58
2.37
3.55
5.33
8.01
For more information on
electrical/optical characteristics,
please see Application Note 1005.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chorinated hydrocarbon family
(methylene chloride, trichloroethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
various solvents attack or dissolve
the encapsulating materials used
to form the package of plastic
LED parts.
For more information on
soldering LEDs, please refer to
Application Note 1027.
Color Categories
Color
Yellow
Green
Bin
1
3
2
4
2
3
4
5
Dominant Wavelength (nm)
Min.
Max.
581.50
585.00
584.00
587.50
586.50
590.00
589.00
592.50
573.00
577.00
570.00
574.00
567.00
571.00
564.00
568.00
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your local
Agilent representatives for further clarification/information.
11
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004 Agilent Technologies, Inc.
Obsoletes 5964-6424E
July 12, 2004
5988-2220EN
Similar pages