GLENAIR M85049-91-21M Composite strain reliefs self-locking Datasheet

Strain
Reliefs
AS85049/91 and M85049/92
Composite Strain Reliefs
Self-Locking
Glenair Connector
Designator H
MIL-DTL-38999
Series III & IV,
EN3645
A Thread
Typ.
M85049/91-11 T
Basic Part No.
M85049/91 = Straight
M85049/92 = 90°
Shell Size
Material and Finish Designator (Note 4)
J = Composite (Conductive), Cadmium Olive Drab
Over Electroless Nickel
M = Composite (Conductive), Electroless Nickel
T = Composite (Non-Conductive) Without Plating
F
C Dia
Typ.
J
G Typ.
(See Note 3)
H
Typ.
K
TABLE I
Shell
Size
09
11
13
15
17
19
21
23
25
A Thread
Class 2B
M12 X 1 - 6H
M15 X 1 - 6H
M18 X 1 - 6H
M22 X 1 - 6H
M25 X 1 - 6H
M28 X 1 - 6H
M31 X 1 - 6H
M34 X 1 - 6H
M37 X 1 - 6H
C Dia
Max
.858 (21.8)
.984 (25.0)
1.157 (29.4)
1.280 (32.5)
1.406 (35.7)
1.516 (38.5)
1.642 (41.7)
1.768 (44.9)
1.890 (48.0)
F
Max
.840 (21.3)
.960 (24.4)
1.100 (27.9)
1.100 (27.9)
1.230 (31.2)
1.410 (35.8)
1.510 (38.4)
1.660 (42.2)
1.760 (44.7)
G
Max
.98 (24.9)
1.05 (26.7)
1.20 (30.5)
1.30 (33.0)
1.42 (36.1)
1.52 (38.6)
1.64 (41.7)
1.77 (45.0)
1.89 (48.0)
H
+.031 Dia
.219 (5.6)
.264 (6.7)
.344 (8.7)
.460 (11.7)
.545 (13.8)
.615 (15.6)
.698 (17.7)
.700 (17.8)
.850 (21.6)
J
Max
1.06 (26.9)
1.10 (27.9)
1.18 (30.0)
1.30 (33.0)
1.38 (35.1)
1.45 (36.8)
1.54 (39.1)
1.62 (41.1)
1.69 (42.9)
K
±.062
.875
.937
1.031
1.125
1.312
1.375
1.500
1.625
1.750
(1.6)
(22.2)
(23.8)
(26.2)
(28.6)
(33.3)
(34.9)
(38.1)
(41.3)
(44.5)
1. For complete dimensions see applicable Military Specification.
2. Metric dimensions (mm) are indicated in parentheses.
3. Clamp Entry is measured with Saddle bars closed and seated on Clamp Ears.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
62-24
Similar pages