MLX75012 10-Channel High-Speed Universal PDIC Features Triple wavelength 405nm, 650nm and 780nm 120MHz bandwidth high speed RF-Channels 8 selectable gain modes, sleep mode Tristate inputs for gain mode selection Two PD-pattern design Low noise design Integrated test mode for easy pick-up adjustment Small-size Ceramic glass-lid package 20-pin 4.5mm x 4.0mm x 1.25mm Integrated 49Bit OTP for parameter trimming High impedance outputs in sleep mode On chip supply blocking 20L CSP Ceramic Package © Melexis Ordering Information Part No. MLX75012 Temperature Code (-25°C to 85°C) Package Code 20L CSP Opto Ceramic Application Examples Option code Pin Description HD-DVD or Blu-Ray® applications read/write High-Speed DVD read/write CD read/write writable data storage optical devices General Description The MLX75012 is a triple wavelength photo detector IC (PDIC) with integrated amplifiers and control circuitry for use in optical pick-up heads. Its 20 photo detectors are optimized for the detection of 405nm, 650nm, and ® 780nm wavelength laser light used in HD-DVD, Blu-Ray , DVD, and CD applications and are arranged in two 3-beam photo detector arrays in the chip centre. The ten signal channels consist of four main-detector channels (A, B, C, and D), four sub-detector channels (E, F, G, H), and two channels with balanced differential output (RFP, RFN). The device features a test mode for PDIC adjustment, a sleep mode, and 8 selectable gain modes, which are controllable by digital- and tri-state logic. The integrated 49Bit one-time programmable ROM allows parameter trimming of the MLX75012 for high product quality. The MLX75012 is manufactured in a 0.6µm BiCMOS-technology. 3901075012 Rev 002 Page 1 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC Table of Contents 1 FUNCTIONAL BLOCK DIAGRAM ..................................................................................................................3 2 GLOSSARY OF TERMS..................................................................................................................................3 3 ABSOLUTE MAXIMUM RATINGS..................................................................................................................4 4 PIN DEFINITIONS AND DESCRIPTIONS.......................................................................................................4 5 GENERAL ELECTRICAL SPECIFICATIONS.................................................................................................5 5.1 NORMAL OPERATING CONDITIONS ................................................................................................................5 5.2 DC CHARACTERISTICS HD/DVD...................................................................................................................6 5.3 DC CHARACTERISTICS CD ...........................................................................................................................7 5.4 AC CHARACTERISTICS HD/DVD...................................................................................................................8 5.5 AC CHARACTERISTICS CD ...........................................................................................................................9 5.6 SENSITIVITY AND BANDWIDTH .....................................................................................................................10 6 OUTSTANDING FEATURES.........................................................................................................................11 7 PERFORMANCE GRAPHS...........................................................................................................................12 7.1 BANDWIDTH MEASURED DATA .....................................................................................................................12 7.2 TRANSIENT BEHAVIOR.................................................................................................................................13 7.3 MAIN-DETECTOR SENSITIVITY MAPPING........................................................................................................13 7.4 NOISE MEASURED DATA ..............................................................................................................................13 8 STANDARD INFORMATION REGARDING MANUFACTURABILITY OF MELEXIS PRODUCTS ............14 9 ESD PRECAUTIONS.....................................................................................................................................14 10 PHOTO DIODE PATTERN ..........................................................................................................................15 11 PACKAGE INFORMATION .........................................................................................................................16 12 DISCLAIMER ...............................................................................................................................................18 3901075012 Rev 002 Page 2 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 1 Functional Block Diagram 1 nc 20 DVD/CD Parameter Trimming 2 E GND Test 19 GND e E1 E2 Test DVD/CD 18 3 F f F1 4 g G1 Prog Pad 5 h H1 H2 16 15 DVD/CD 14 DVD/CD ATIA Mode CTRL 6 a A 13 12 DVD/CD BTIA B Vcc G2 Gain CTRL A 17 Vref Test DVD/CD H 49Bit Zenerzap OTP Test DVD/CD G F2 Test 7 b SW2 SW1 SW0 EN Test B Trimming DVD/CD DTIA D 8 d Bias DVD/CD CTIA C D 9 c C ATIA RFP 10 Σ -ATIA BTIA -BTIA CTIA -CTIA DTIA -DTIA Σ 11 RFN Fig. 1: Functional Block Diagram of MLX75012 2 Glossary of Terms PDIC OPU PUH OTP 3901075012 Rev 002 Photo detector IC Optical Pickup-Unit Pick-up Head One-time programmable Page 3 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 3 Absolute Maximum Ratings Parameter Symbol Supply Voltage (overvoltage) VCC Supply Voltage (operating) VCC Output Voltage Vout Output Current Iout Input Voltage Vin Operating Temperature Range TA Storage Temperature Range TS ESD Sensitivity (AEC Q100 002) Power Consumption Ptot Table 1: Absolute maximum ratings Min -0.3 4.5 -0.3 -5 -0.3 -25 -40 Max 6 5.5 VDD + 0.3 5 VDD + 0.3 85 100 4 250 Units V V V mA V °C °C kV mW Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute-maximumrated conditions for extended periods may affect device reliability. 4 Pin Definitions and Descriptions Pin № Name Type Function 1 n.c. 2 E Output E1+E2 for HD/DVD-Mode / e for CD-Mode 3 F Output F1+F2 for HD/DVD-Mode / f for CD-Mode 4 G Output G1+G2 for HD/DVD-Mode / g for CD-Mode 5 H Output H1+H2 for HD/DVD-Mode / h for CD-Mode 6 A Output A for HD/DVD-Mode / a for CD-Mode 7 B Output B for HD/DVD-Mode / b for CD-Mode 8 D Output D for HD/DVD-Mode / d for CD-Mode 9 C Output C for HD/DVD-Mode / c for CD-Mode 10 RF+ Output Pos(A+B+C+D) 11 RFOutput Neg(A+B+C+D) 12 TEST Digital-IN Adjustment Mode 13 EN Digital-IN Sleep Mode 14 SW0 Tristate-IN Operating Mode Selection 15 SW1 Tristate-IN Gain Mode Selection 16 SW2 Tristate-IN Gain Mode Selection 17 Vcc Supply Power Supply Pin (4.5V to 5.5V) 18 Vref Ref-IN Voltage Reference (1.6V to Vcc-2.0V) 19 GND Supply Analog Ground 20 GND Supply Digital Ground Table 2: Pin definitions and descriptions 3901075012 Rev 002 Page 4 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC Pin № 12 13 Name TEST EN Type Digital-IN Digital-IN 14 15 16 SW0 SW1 SW2 Tristate-IN Tristate-IN Tristate-IN Functional Schematic Table 3: Functional schematics of digital inputs 5 General Electrical Specifications 5.1 Normal Operating Conditions Parameter Symbol VCC Supply voltage range Operation temperature ϑamb ILpdata Input light Power main-channels1 2 ILptrack Input light Power sub-channels VselectH Tristate High select pin Voltage VselectM Tristate Middle select pin Voltage Tristate Low select pin Voltage VselectL VHigh Digital pin High Voltage VLow Digital pin Low Voltage RL Channel Output Resistive Load CL Channel Output Capacitive Load VREF VREF voltage range Table 4: Normal operating conditions 1 2 Test Conditions Min 4.5 -25 Typ 3.1 1.3 0 Vcc-1.5 0 10 1.6 10 20 2.0 Max 5.5 85 1000 1000 VCC 2.6 0.8 VCC 1.5 50 VCC –2 Units V °C uW uW V V V V V kΩ pF V Maximum input light power per channel Maximum input light power per channel 3901075012 Rev 002 Page 5 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 5.2 DC Characteristics HD/DVD All parameter values at ϑamb = 25 °C, VCC=5V, VREF=2.0V, RL=10kΩ, CL=20pF, λ=405nm (HD) or λ=650nm (DVD), unless otherwise specified; Parameter Current consumption Sleep Mode Current Consumption Symbol Icc Icc sleep Output Offset Voltage (A...D) HD/DVD Output Offset Voltage (E...H) HD/DVD Output Offset Voltage (RF+, RF-) Output Offset Voltage, calculated values, HD/DVD Voff A,B,C,D Voff E,F,G,H Voff RF+,RF- Offsetdrift Gain Variation (A,B,C,D) Gain Variation (E,F,G,H) Gain Variation (RF+,RF-) Max. Output Voltage Min. Output Voltage Gaindrift Linearity ∆Voff /∆ϑ A,B,C,D,E,F,G,H Vout A,B,C,D Vout E,F,G,H Vout RF+,RFVoutmax (A...D, E…H, RF+), P =500µW Voutmin (RF-), Po =500µW ∆Gain ϑ / all gain modes, all channels ∆Gain (0- 90% output swing) ∆Ilight ∆Voff Test Conditions shade for EN=Low for SWx=Low/Low/Low Shade, BaseVoltage=VREF Shade, BaseVoltage=VREF Shade, BaseVoltage=VREF A-B, Shade C-D, Shade (A+B)-(C+D), Shade (A+C)-(B+D), Shade A+B+C+D, Shade (E1+E2)-(H1+H2), Shade (G1+G2)-(F1+F2), Shade (E1+E2+F1+F2)(G1+G2+H1+H2), Shade Min Typ 38 -25 -25 -40 -35 -35 -35 -35 -60 -35 -35 -40 -15 -15 -15 4 0 0 0 0 0 0 0 0 0 0 0 Max 44 35 110 +25 +25 +40 +35 +35 +35 +35 +60 +35 +35 +40 Units mA uA uA mV mV mV mV mV mV mV mV mV mV mV 0 0 0 100 +15 +15 +15 uV / K % % % V V %/K % 1.0 0.1 8 Table 5: DC characteristics HD/DVD mode 3901075012 Rev 002 Page 6 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 5.3 DC Characteristics CD All parameter values at ϑamb = 25 °C, VCC=5V, VREF=2.0V, RL=10kΩ, CL=20pF, λ=780nm (CD), unless otherwise specified; Parameter Current consumption Sleep Mode Current Consumption Symbol Icc Icc sleep Output Offset Voltage (A...D) CD mode Output Offset Voltage (E...H) CD mode Output Offset Voltage (RF+, RF-) CD Output Offset Voltage, calculated values, CD mode Voff A,B,C,D Voff E,F,G,H Voff RF+,RF- Offsetdrift Gain Variation (A,B,C,D) Gain Variation (E,F,G,H) Gain Variation (RF+,RF-) Max. Output Voltage Min. Output Voltage Gaindrift Linearity ∆Voff /∆ϑ A,B,C,D,E,F,G,H Vout A,B,C,D Vout E,F,G,H Vout RF+,RFVoutmax (A...D, E…H, RF+), P =500µW Voutmin (RF-), Po =500µW ∆Gain ϑ / all gain modes, all channels ∆Gain (0- 90% output swing) ∆Ilight ∆Voff Test Conditions shade for EN=Low for SWx=Low/Low/Low Shade, BaseVoltage=VREF Shade, BaseVoltage=VREF Shade, BaseVoltage=VREF A-B, Shade C-D, Shade (A+B)-(C+D), Shade (A+C)-(B+D), Shade A+B+C+D, Shade (E1+E2)-(H1+H2), Shade (G1+G2)-(F1+F2), Shade (E1+E2+F1+F2)(G1+G2+H1+H2), Shade Min Typ 38 -50 -50 -60 -50 -50 -60 -60 -100 -60 -60 -80 -15 -15 -15 4 0 0 0 0 0 0 0 0 0 0 0 Max 44 35 110 +50 +50 +60 +50 +50 +60 +60 +100 +60 +60 +80 Units mA uA uA mV mV mV mV mV mV mV mV mV mV mV 0 0 0 100 +15 +15 +15 uV / K % % % V V %/K % 1.0 0.1 8 Table 6: DC characteristics CD mode 3901075012 Rev 002 Page 7 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 5.4 AC Characteristics HD/DVD All parameter values at ϑamb = 25 °C, VCC=5V, VREF=2.0V, RL=10kΩ, CL=20pF, λ=405nm (HD) or λ=650nm (DVD), unless otherwise specified; Parameter Group Delay (A~D, RF+/-) RF Settling Time (write) RF Settling Time (read) A,B,C,D,E,F,G,H Settling Time (write) A,B,C,D,E,F,G,H Settling Time (read) Symbol ∆Gd TRFset write TRFset read Tset write Slew Rate (RF) SRRF+,RF- Slew Rate (A~D) SRA,B,C,D Slew Rate (E~H) Tset read Test Conditions 100kHz~bandwidth limit Output-step1.5V → 0±15mV Output-step1.5V Output-step1.5V Min Typ Output-step1.5V Max 2 10 20 15 Units ns 25 Output-step 1V, Gain Mode (1…32) Gain Mode 64 Gain Mode 128 Output-step 1V, Gain Mode (1…32) Gain Mode 64 Gain Mode 128 200 175 150 150 110 75 V/us SRE,F,G,H Output-step 1V, Gain Mode (1…32) Gain Mode 64 Gain Mode 128 150 110 75 V/us Noise Level (A~D) VnA,B,C,D Noise Level (E~H) VnE,F,G,H Noise Level (RF+/-) VnRF RBW=30kHz, 1...65MHz Highest Gain RBW=30kHz, 1...65MHz Highest Gain RBW=30kHz, 1...130MHz Highest Gain Peaking (A~D) Power Supply Rejection Ratio Gain Switch Response Time Sleep-Mode Wake-up Time Speak PSRR tswitch twake-up V/us <10kHz 10 -78 dBm -73 dBm -78 dBm 1 -45 50 50 dB dB us us Table 7: AC characteristics HD/DVD 3901075012 Rev 002 Page 8 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 5.5 AC Characteristics CD All parameter values at ϑamb = 25 °C, VCC=5V, VREF=2.0V, RL=10kΩ, CL=20pF, λ=780nm (CD), unless otherwise specified; Parameter Group Delay (A~D, RF+/-) RF Settling Time (write) RF Settling Time (read) A,B,C,D,E,F,G,H Settling Time (write) A,B,C,D,E,F,G,H Settling Time (read) Symbol ∆Gd TRFset write TRFset read Tset write Test Conditions 100kHz~bandwidth limit Output-step1.5V → 0±15mV Output-step1.5V Output-step1.5V Min Typ Max 3 20 40 25 Units ns Tset read Output-step1.5V Slew Rate (RF) SRRF+,RF- SRA,B,C,D 150 110 75 150 110 75 V/us Slew Rate (A~D) Output-step 1V, Gain Mode (1…32) Gain Mode 64 Gain Mode 128 Output-step 1V, Gain Mode (1…32) Gain Mode 64 Gain Mode 128 Slew Rate (E~H) SRE,F,G,H Output-step 1V, Gain Mode (1…32) Gain Mode 64 Gain Mode 128 100 75 50 V/us Noise Level (A~D) VnA,B,C,D Noise Level (E~H) VnE,F,G,H Noise Level (RF+/-) VnRF RBW=30kHz, 1...65MHz Highest Gain RBW=30kHz, 1...65MHz Highest Gain RBW=30kHz, 1...130MHz Highest Gain Peaking (A~D) Power Supply Rejection Ratio Gain Switch Response Time Sleep-Mode Wake-up Time Speak PSRR tswitch twake-up 45 V/us <10kHz 10 -78 dBm -73 dBm -78 dBm 1 -45 50 50 dB dB us us Table 8: AC characteristics CD 3901075012 Rev 002 Page 9 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 5.6 Sensitivity and Bandwidth HD-DVD / Blu-Ray® / DVD Mode (SW0 = H) Detector-Pattern 1 Gain Mode No SW1 SW2 A, B, C, D Sens. BW [mV/uW] [MHz] 405nm 1 2 4 8 16 32 64 128 Table 9: 650nm min. typ. E, F, G, H Sens. BW [mV/uW] [MHz] 405nm 650nm min. RFP / RFN Sens. BW [mV/uW] [MHz] Typ. 405nm 650nm min. typ. 0.3 0.6 1.2 2.4 4.8 9.6 19.2 38.4 110 110 110 110 110 90 70 45 120 120 120 120 120 110 90 55 L M 0.23 0.45 80 100 0.56 1.125 60 80 0.15 L M 0.45 0.9 80 100 1.125 2.25 60 80 0.3 M L 0.9 1.8 80 100 2.25 4.5 60 80 0.6 M M 1.8 3.6 80 100 4.5 9 60 80 1.2 M H 3.6 7.2 80 100 9 18 60 80 2.4 H L 7.2 14.4 80 100 18 36 45 60 4.8 H M 14.4 28.8 65 80 36 72 30 50 9.6 H H 28.8 57.6 45 55 72 144 20 35 19.2 Sensitivity and bandwidth characteristics HD/DVD (405nm and 650nm), Operating Point: 200mV(DC), 70mV(AC) Output Voltage CD Mode (SW0 = M or L) Detector-Pattern 2 Gain Mode No SW1 SW2 A, B, C, D Sens. BW [mV/uW] [MHz] 780nm min. typ. E, F, G, H Sens. BW [mV/uW] [MHz] 780nm min. typ. 1 2 4 L M 0.9 80 90 2.25 60 L M 1.8 80 90 4.5 60 M L 3.6 80 90 9 60 8 M M 7.2 80 90 18 60 16 M H 14.4 60 90 36 40 32 H L 28.8 40 90 72 30 64 H M 57.6 30 55 144 25 128 H H 115.2 20 30 288 15 Table 10: Sensitivity and bandwidth characteristics CD (780nm) Operating Point: 200mV(DC), 70mV(AC) Output Voltage 3901075012 Rev 002 Page 10 of 18 80 80 80 80 60 40 30 20 RFP / RFN Sens. BW [mV/uW] [MHz] 780nm min. typ. 0.6 1.2 2.4 4.8 9.6 19.2 38.4 76.8 80 80 80 80 80 60 40 30 100 100 100 100 100 100 60 40 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 6 Outstanding Features The MLX75012 opens the door to the new world of violet laser based storage-technology. By combining the traditional red and infrared applications in a high-speed-, low-power design a real universal device was created that can be used in any thinkable application ranging from HD-DVD recorders over gamingequipment to the use in ultra-slim drives in new generation laptops. To allow small-size and cost-effective solutions in optical pick-up design, the MLX75012 offers two complete three-beam Detector patterns that can be used by dual-wavelength lasers. At the same time, the robust 20-pin CSP Ceramic Glass-Lid package offers small-size outer dimensions. The system concept of the MLX75012 universal PDIC is based on newly developed blue enhanced detectors that ensure a high spectral sensitivity even before the first amplifier is involved. A 49-Bit one time programmable ROM guarantees high parameter stability by trimming at the device manufacturing process. To support the adjustment process of pick-up systems in manufacturing, the MLX75012 offers a special testmode in which one of the tracking detector-array can be switched off. 3901075012 Rev 002 Page 11 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 7 Performance Graphs 7.1 Bandwidth measured data AC Plot, RFP Channel, CD mode AC Plot, RFP Channel, DVD mode 80 80 Gain1 Gain1 Gain2 70 Gain2 70 Gain4 Gain4 60 Gain8 Gain32 Gain64 40 Gain128 30 Gain8 Gain16 Gain16 50 AC Gain (dB) AC Gain (dB) 60 50 Gain64 Gain128 30 20 20 10 10 0 Gain32 40 0 1 10 100 1000 1 10 Frequency f/MHz 100 Fig. 2: RFP Channel AC Response, HD/DVD mode, λ=405nm Fig. 3: RFP Channel AC Response, CD mode, λ=780nm AC Plot, Channel A, DVD mode AC Plot, Channel A, CD mode 80 80 Gain1 Gain1 70 60 Gain2 Gain4 Gain8 50 Gain16 Gain32 40 Gain64 Gain128 70 Gain2 Gain4 60 Gain8 Gain16 50 Gain32 40 Gain64 Gain128 30 AC Gain (dB) AC Gain (dB) 1000 Frequency f / MHz 30 20 20 10 10 0 0 1 10 100 1000 1 Frequency f/MHz 100 1000 Frequency f/MHz Fig. 4: AC Response, Channel A, HD/DVD mode, λ=405nm 3901075012 Rev 002 10 Fig. 5: AC Response, Channel A, CD mode, λ=780nm Page 12 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 7.2 Transient behavior 7.3 Main-detector sensitivity mapping RFP N RFN N Fig. 6: RF Channels Transient Output Signal, Gain Mode=128, HD-DVD/Blu-Ray®/DVD Mode Fig. 7: Laser Scan of Central Main Detector, ® Pattern1 with 635nm Laser. HD-DVD/Blu-Ray / DVD Mode 7.4 Noise measured data Noise Measurement RFP, CD mode Noise Measurement RFP, HD/DVD mode -65 -65 Output Noise Level / dBm -70 -75 -80 -85 Gain=1 Gain=2 Gain=4 Gain=8 Gain=16 Gain=32 Gain=64 Gain=128 -70 Output Noise Level / dBm Gain=1 Gain=2 Gain=4 Gain=8 Gain=16 Gain=32 Gain=64 Gain=128 -75 -80 -85 -90 -90 -95 -95 1 10 100 1000 1 Fig. 8: RFP Channel Output Noise at 30kHz Bandwidth, CD mode 3901075012 Rev 002 10 100 1000 Frequency f / MHz Frequency f / MHz Fig. 9: RFP Channel Output Noise at 30kHz Bandwidth, HD-DVD/Blu-Ray®/DVD Mode Page 13 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 8 Standard information regarding manufacturability of Melexis products Our products are classified and qualified regarding soldering technology, solderability and moisture sensitivity level according to following test methods: Reflow Soldering SMD’s (Surface Mount Devices) • • IPC/JEDEC J-STD-020 Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices (classification reflow profiles according to table 5-2) EIA/JEDEC JESD22-A113 Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing (reflow profiles according to table 2) Wave Soldering SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices) • • EN60749-20 Resistance of plastic- encapsulated SMD’s to combined effect of moisture and soldering heat EIA/JEDEC JESD22-B106 and EN60749-15 Resistance to soldering temperature for through-hole mounted devices Iron Soldering THD’s (Through Hole Devices) • EN60749-15 Resistance to soldering temperature for through-hole mounted devices Solderability SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices) • EIA/JEDEC JESD22-B102 and EN60749-21 Solderability For all soldering technologies deviating from above mentioned standard conditions (regarding peak temperature, temperature gradient, temperature profile etc) additional classification and qualification tests have to be agreed upon with Melexis. The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of adhesive strength between device and board. Melexis is contributing to global environmental conservation by promoting lead free solutions. For more information on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of the use of certain Hazardous Substances) please visit the quality page on our website: http://www.melexis.com/quality.asp 9 ESD Precautions Electronic semiconductor products are sensitive to Electro Static Discharge (ESD). Always observe Electro Static Discharge control procedures whenever handling semiconductor products. 3901075012 Rev 002 Page 14 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 10 Photo Diode Pattern Pattern 1 SW0 = H Pattern 2 SW0 = M or L all dimensions in um! Fig. 10: The two Detector Patterns of MLX75012. Gap between detectors is 5um. The Patterns are switched by changing from CD- to DVD-Mode at pin 16 (SW0). 3901075012 Rev 002 Page 15 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 11 Package Information Parameter Unit Glass Type Refractive Index Typical Dimensions3 for 20L CSP SMD Ceramic Package with Glass-Lid 1.5300 @ 486nm 1.5204 @ 656nm 3500 / 4000 300 Borosilicate Glass D263 300 20 1.25 (incl. Glass) 4 4.5 0.4 0.7 no yes, on bottom: 3digit Lot/Time Code MSL-3 yes, Bottom (dot of fired tungsten) and Top (die-paddle) centered ±70 ±2 Yes Glass x/y Dimesion [µm/µm] Glass Thickness [µm] Glass Type Air gap above Detector [µm] No. of Pins Package Height [mm] Package Width [mm] Package Length [mm] Pin Pitch [mm] Pin Length [mm] Exposed Pad Marking MSL Pin 1 Marking Chip Position Tolerance x/y [µm] max Chip Rotation θ [deg] Chip ARC Table 11: Package Measures 3 For Tolerances please see the package drawing on page 17 3901075012 Rev 002 Page 16 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 3901075012 Rev 002 Page 17 of 18 Data Sheet June/07 MLX75012 10-Channel High-Speed Universal PDIC 12 Disclaimer Devices sold by Melexis are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. Melexis makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. Melexis reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with Melexis for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical lifesupport or life-sustaining equipment are specifically not recommended without additional processing by Melexis for each application. The information furnished by Melexis is believed to be correct and accurate. However, Melexis shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interrupt of business or indirect, special incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of Melexis’ rendering of technical or other services. © 2005 Melexis NV. All rights reserved. For the latest version of this document, go to our website at www.melexis.com Or for additional information contact Melexis Direct: Europe, Africa, Asia: Phone: +32 1367 0495 E-mail: [email protected] America: Phone: +1 603 223 2362 E-mail: [email protected] ISO/TS 16949 and ISO14001 Certified 3901075012 Rev 002 Page 18 of 18 Data Sheet June/07