LFM100 1 0 0 W U l t r a m i n i a ture Open Frame Switching Power Supplies series Universal 85-265VAC Input High Efficiency Regulated Outputs 3000V Isolation Single Outputs UL60950 & EN60950 Approved 3”W x 5”L x 1.24”H 3”W x 5”L x 1.34”H (5V Output) Model Number Output Voltage 0.156” SPACED CONNECTORS LFM100-5 5 VDC LFM100-9 9 VDC LFM100-12 12 VDC LFM100-15 15VDC LFM100-18 18VDC LFM100-24 24VDC LFM100-48 48VDC Output Amps(max) 20A 11.2A 8.4A 6.7A 5.6A 4.2A 2.1A Order On-Line! WWW.ASTRODYNE.COM astrodyne.com 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181 LFM100 1 0 0 W U l t r a m i n i a ture Open Frame Switching Power Supplies INPUT SPECIFICATIONS MECHANICAL SPECIFICATIONS 0.22 [5.70] 85-265 VAC (See Note 2) 47-63 Hz 25A@100V, 50A@200V Input * 3.5mA max. ACL ACN OUTPUT SPECIFICATIONS 5 Volt Output V+ See Selection Chart +/- 1% +/- 0.5% +/- 1% +/-0.05%/°C 1% (See Note 1) Continuous Auto Recovery 20 mS, typ @ 115VAC V- 0.06 [1.60] 1 2 3 4 5 6 7 8 0.22 [5.70] 0.08 [2.00]max 2.55 [64.80] 1.34 [34.00]max 3.00[76.20] ACL ACN 0.22 [5.70] GENERAL SPECIFICATIONS V+ 3000VAC 85%, typ. UL60950, EN60950 V- Input-Out Isolation Efficiency Safety 1 2 3 4 5 6 7 8 0.06 [1.60] 5.00[127.00] 4.55 [115.60] - Voltage and Current Load Regulation (10%-FL) Line Regulation (LL-HL, FL) Voltage Accuracy Temperature Coefficient Ripple/Noise Short Circuit Protection Over Voltage Protection Hold Up Time 5.00[127.00] 4.55 [115.60] - Input Voltage Range Frequency Range Inrush Current, typ: Leakage Current series 0.22 [5.70] 0.08 [2.00]max PHYSICAL SPECIFICATIONS 1.24 [32.00]max Size 5VDC Output 3” x 5” x 1.34” +/-0.04” Tol. All Others 3” x 5” x 1.24” +/-0.04” Tol. Construction Open Frame ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Cooling Storage Temperature 0 to +40°C Free Air Convection -20 to +85°C * All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNE.COM 2.55 [64.80] 3.00[76.20] Pin # Output Pin Functions 1, 2, 3, 4 5, 6, 7, 8 + Output - Output Notes: 1) LFM5/9/12: Add a 0.1uF ceramic capacitor and a 220uF E.L.capacitor to output for Ripple & Noise (R & N) measuring @ 20MHz BW. All Others: Add a 0.1uF ceramic capacitor and a 10uF E.L.capacitor to output for Ripple & Noise (R & N) measuring @ 20MHz BW. 2) Connections: AC Input - Molex 5277 or Equivalent DC Output - Molex 5273 or Equivalent Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications. 300 Myles Standish Blvd., Taunton, MA 02780 Ph: 1-800-823-8082 Fax: 508-823-8181