LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS KLM 15mm height snap-ins, 105℃ KLM Series ・15mm height snap-ins ・Endurance with ripple current : 2,000 hours at 105℃ ・Non solvent resistant type ・RoHS Compliant Low profile KMQ P215 ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -25 to +105℃ 160 to 400Vdc ±20% (M) I≦3 CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 160 to 400V 0.20 tanδ (Max.) Rated voltage (Vdc) 160 to 400V Z (-25℃)/Z (+20℃) 4 1 2 3 4 E KLM Negative mark 5 6 7 8 9 10 VS N PC board pin-out φD+1max. 10 2-φ2 4.0±0.5 L±2 ◆STANDARD RATINGS 160 180 200 12 13 14 M 15 16 17 18 S Please refer to "Product code guide (snap-in type)" Cap (µF) Rated ripple Case size current tanδ (Arms/ φD×L(mm) 105℃,120Hz) 150 180 220 270 330 390 120 150 180 220 270 330 390 120 150 180 22×15 25.4×15 25.4×15 30×15 30×15 35×15 22×15 25.4×15 25.4×15 30×15 30×15 35×15 35×15 22×15 25.4×15 30×15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 11 Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47µF:470, 100µF:101) Dummy terminal code Terminal code Voltage code (ex. 160V:161,400V:401) Series code Category The standard design has no plastic disc. WV (Vdc) (at 20℃, 120Hz) ◆PART NUMBERING SYSTEM Code : VS Sleeve (PET : Brown) Vent (at 20℃ after 5 minutes) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105℃. ≦±20% of the initial value Capacitance change ≦200% of the initial specified value D.F. (tanδ) ≦The initial specified value Leakage current The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. ≦±15% of the initial value Capacitance change ≦150% of the initial specified value D.F. (tanδ) ≦The initial specified value Leakage current ◆DIMENSIONS [mm] ●Terminal (at 20℃, 120Hz) 0.68 0.79 0.88 0.96 1.06 1.20 0.61 0.73 0.79 0.86 0.96 1.10 1.17 0.61 0.73 0.79 Part No. EKLM161VSN151MP15S EKLM161VSN181MQ15S EKLM161VSN221MQ15S EKLM161VSN271MR15S EKLM161VSN331MR15S EKLM161VSN391MA15S EKLM181VSN121MP15S EKLM181VSN151MQ15S EKLM181VSN181MQ15S EKLM181VSN221MR15S EKLM181VSN271MR15S EKLM181VSN331MA15S EKLM181VSN391MA15S EKLM201VSN121MP15S EKLM201VSN151MQ15S EKLM201VSN181MR15S WV (Vdc) 200 250 400 Cap (µF) Case size φD×L(mm) tanδ Rated ripple current (Arms/ 105℃,120Hz) 220 270 330 82 100 120 150 180 220 39 47 56 68 82 100 120 30×15 35×15 35×15 22×15 25.4×15 25.4×15 30×15 30×15 35×15 22×15 25.4×15 25.4×15 30×15 30×15 35×15 35×15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.90 1.00 1.07 0.50 0.59 0.65 0.71 0.79 0.90 0.35 0.40 0.44 0.46 0.51 0.56 0.62 Part No. EKLM201VSN221MR15S EKLM201VSN271MA15S EKLM201VSN331MA15S EKLM251VSN820MP15S EKLM251VSN101MQ15S EKLM251VSN121MQ15S EKLM251VSN151MR15S EKLM251VSN181MR15S EKLM251VSN221MA15S EKLM401VSN390MP15S EKLM401VSN470MQ15S EKLM401VSN560MQ15S EKLM401VSN680MR15S EKLM401VSN820MR15S EKLM401VSN101MA15S EKLM401VSN121MA15S ◆RATED RIPPLE CURRENT MULTIPLIERS ●Frequency Multipliers Frequency (Hz) 160 to 250Vdc 400Vdc 50 0.81 0.77 120 1.00 1.00 300 1.17 1.16 1k 1.32 1.30 10k 1.45 1.41 50k 1.50 1.43 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 240 CAT. No. E1001N