TI LM324DR Quadruple operational amplifier Datasheet

 SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
D
D
D
D
D
D
description/ordering information
These devices consist of four independent
high-gain frequency-compensated operational
amplifiers that are designed specifically to operate
from a single supply over a wide range of voltages.
Operation from split supplies also is possible if the
difference between the two supplies is 3 V to 32 V
(3 V to 26 V for the LM2902), and VCC is at least
1.5 V more positive than the input common-mode
voltage. The low supply-current drain is
independent of the magnitude of the supply
voltage.
1OUT
1IN−
1IN+
VCC
2IN+
2IN−
2OUT
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN−
4IN+
GND
3IN+
3IN−
3OUT
LM124, LM124A . . . FK PACKAGE
(TOP VIEW)
1IN−
1OUT
NC
4OUT
4IN−
D
− LM224K, LM224KA
− LM324K, LM324KA
− LM2902K, LM2902KV, LM2902KAV
Wide Supply Ranges
− Single Supply . . . 3 V to 32 V
(26 V for LM2902)
− Dual Supplies . . . +1.5 V to +16 V
(+13 V for LM2902)
Low Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ
Common-Mode Input Voltage Range
Includes Ground, Allowing Direct Sensing
Near Ground
Low Input Bias and Offset Parameters
− Input Offset Voltage . . . 3 mV Typ
A Versions . . . 2 mV Typ
− Input Offset Current . . . 2 nA Typ
− Input Bias Current . . . 20 nA Typ
A Versions . . . 15 nA Typ
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . 32 V
(26 V for LM2902)
Open-Loop Differential Voltage
Amplification . . . 100 V/mV Typ
Internal Frequency Compensation
LM124 . . . D, J, OR W PACKAGE
LM124A . . . J PACKAGE
LM224, LM224A, LM224K, LM224KA . . . D OR N PACKAGE
LM324, LM324K . . . D, N, NS, OR PW PACKAGE
LM324A . . . D, DB, N, NS, OR PW PACKAGE
LM324KA . . . D, N, NS, OR PW PACKAGE
LM2902 . . . D, N, NS, OR PW PACKAGE
LM2902K . . . D, DB, N, NS, OR PW PACKAGE
LM2902KV, LM2902KAV . . . D OR PW PACKAGE
(TOP VIEW)
1IN+
NC
VCC
NC
2IN+
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
4IN+
NC
GND
NC
3IN+
2IN−
2OUT
NC
3OUT
3IN−
D 2-kV ESD Protection for:
NC − No internal connection
Applications include transducer amplifiers, dc amplification blocks, and all the conventional
operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For
example, the LM124 can be operated directly from the standard 5-V supply that is used in digital systems and
provides the required interface electronics, without requiring additional ±15-V supplies.
Copyright  2004, Texas Instruments Incorporated
!" # $%&" !# '%()$!" *!"&+
*%$"# $ " #'&$$!"# '& ",& "&# &-!# #"%&"#
#"!*!* .!!"/+ *%$" '$&##0 *&# " &$&##!)/ $)%*&
"&#"0 !)) '!!&"&#+
'*%$"# $')!" " 11233 !)) '!!&"&# !& "&#"&*
%)&## ",&.#& "&*+ !)) ",& '*%$"# '*%$"
'$&##0 *&# " &$&##!)/ $)%*& "&#"0 !)) '!!&"&#+
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
description/ordering information (continued)
ORDERING INFORMATION
TA
VIOmax
AT 25°C
MAX
TESTED
VCC
PACKAGE†
PDIP (N)
SOIC (D)
7 mV
30 V
SOP (NS)
TSSOP (PW)
0°C
0
C to 70
70°C
C
PDIP (N)
SOIC (D)
3 mV
30 V
SOP (NS)
SSOP (DB)
TSSOP (PW)
PDIP (N)
5 mV
30 V
SOIC (D)
−25°C to 85°C
PDIP (N)
3 mV
30 V
SOIC (D)
Tube of 25
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
LM324N
LM324N
LM324KN
LM324KN
Tube of 50
LM324D
Reel of 2500
LM324DR
Tube of 50
LM324KD
Reel of 2500
LM324KDR
Reel of 2000
LM324NSR
Tube of 50
LM324KNS
Reel of 2000
LM324KNSR
Tube of 90
LM324PW
Reel of 2000
LM324PWR
Tube of 90
LM324KPW
Reel of 2000
LM324KPWR
Tube of 25
LM324AN
LM324AN
Tube of 25
LM324KAN
LM324KAN
Tube of 50
LM324AD
Reel of 2500
LM324ADR
Tube of 50
LM324KAD
Reel of 2500
LM324KADR
Reel of 2000
LM324ANSR
Tube of 50
LM324KANS
Reel of 2000
LM324KANSR
Reel of 2000
LM324ADBR
Tube of 90
LM324APW
Reel of 2000
LM324APWR
Tube of 90
LM324KAPW
Reel of 2000
LM324KAPWR
Tube of 25
LM324
LM324K
LM324
LM324K
L324
L324K
LM324A
LM324KA
LM324A
LM324KA
LM324A
L324A
L324KA
LM224N
LM224N
LM224KN
LM224KN
Tube of 50
LM224D
Reel of 2500
LM224DR
Tube of 50
LM224KD
Reel of 2500
LM224KDR
Tube of 25
LM224AN
LM224AN
Tube of 25
LM224KAN
LM224KAN
Tube of 50
LM224AD
Reel of 2500
LM224ADR
Tube of 50
LM224KAD
Reel of 2500
LM224KADR
LM224
LM224K
LM224A
LM224KA
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
ORDERING INFORMATION (CONTINUED)
TA
VIOmax
AT 25°C
MAX
TESTED
VCC
LM2902N
LM2902N
Tube of 25
LM2902KN
LM2902KN
Tube of 50
LM2902D
Reel of 2500
LM2902DR
Tube of 50
LM2902KD
Reel of 2500
LM2902KDR
Reel of 2000
LM2902NSR
Tube of 50
LM2902KNS
Reel of 2000
LM2902KNSR
Tube of 80
LM2902KDB
Reel of 2000
LM2902KDBR
Tube of 90
LM2902PW
Reel of 2000
LM2902PWR
Tube of 90
LM2902KPW
Reel of 2000
LM2902KPWR
SOIC (D)
Reel of 2500
LM2902KVQDR
L2902KV
TSSOP (PW)
Reel of 2000
LM2902KVQPWR
L2902KV
SOIC (D)
Reel of 2500
LM2902KAVQDR
L2902KA
TSSOP (PW)
Reel of 2000
LM2902KAVQPWR
L2902KA
CDIP (J)
Tube of 25
LM124J
LM124J
CFP (W)
Tube of 25
LM124W
LM124W
LCCC (FK)
Tube of 55
LM124FK
LM124FK
Tube of 50
LM124D
Reel of 2500
LM124DR
CDIP (J)
Tube of 25
LM124AJ
LCCC (FK)
Tube of 55
LM124AFK
SOIC (D)
SOP (NS)
7 mV
−40°C
−40
C to 125
125°C
C
SSOP (DB)
TSSOP (PW)
32 V
2 mV
5 mV
32 V
30 V
−55°C
−55
C to 125
125°C
C
SOIC (D)
2 mV
30 V
TOP-SIDE
MARKING
Tube of 25
PDIP (N)
26 V
ORDERABLE
PART NUMBER
PACKAGE†
LM2902
LM2902K
LM2902
LM2902K
L2902K
L2902
L2902K
LM124
LM124AJ
LM124AFK
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
symbol (each amplifier)
−
IN−
OUT
+
IN+
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
schematic (each amplifier)
VCC
≈6-µA
Current
Regulator
≈6-µA
Current
Regulator
≈100-µA
Current
Regulator
OUT
IN−
†
≈50-µA
Current
Regulator
IN+
†
GND
To Other
Amplifiers
COMPONENT COUNT
(total device)
Epi-FET
Transistors
Diodes
Resistors
Capacitors
1
95
4
11
4
† ESD protection cells - available on LM324K and LM324KA only
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1)
LM2902
ALL OTHER
DEVICES
UNIT
±13 or 26
±16 or 32
V
±26
±32
V
Input voltage, VI (either input)
−0.3 to 26
−0.3 to 32
V
Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C,
VCC ≤ 15 V (see Note 3)
Unlimited
Unlimited
D package
86
86
DB package
96
96
N package
80
80
NS package
76
76
PW package
113
Differential input voltage, VID (see Note 2)
Package thermal impedance, θJA (see Notes 4 and 5)
Package thermal impedance, qJC (see Notes 6 and 7)
°C/W
C/W
113
FK package
5.61
J package
15.05
W package
14.65
Operating virtual junction temperature, TJ
150
Case temperature for 60 seconds
FK package
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds
J or W package
300
°C/W
C/W
150
°C
260
°C
300
°C
°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
2. Differential voltages are at IN+, with respect to IN−.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/qJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
6. Maximum power dissipation is a function of TJ(max), qJC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ(max) − TC)/qJC. Operating at the absolute maximum TJ of 150°C can affect reliability.
7. The package thermal impedance is calculated in accordance with MIL-STD-883.
Storage temperature range, Tstg
−65 to 150
−65 to 150
ESD protection
TEST CONDITIONS
Human-Body Model
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TYP
±2
UNIT
kV
5
SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS†
LM124
LM224
TA‡
MIN
VIO
Input offset voltage
VCC = 5 V to MAX,
VIC = VICRmin, VO = 1.4 V
IIO
Input offset current
VO = 1.4 V
IIB
Input bias current
VO = 1.4 V
VICR
Common-mode
input voltage range
VCC = 5 V to MAX
TYP §
MAX
3
5
25°C
Full range
2
Full range
25°C
VCC − 1.5
VCC − 1.5
25°C
RL = 2 kΩ
Full range
26
RL ≥ 10 kΩ
Full range
27
VIC = VICRmin
kSVR
Supply-voltage
rejection ratio
(∆VCC /∆VIO)
VO1/ VO2
Crosstalk
attenuation
Supply current
(four amplifiers)
Full range
5
20
100
V
V
28
5
25
nA
20
mV
25°C
50
Full range
25
100
25°C
70
80
65
80
dB
25°C
65
100
65
100
dB
120
dB
V/mV
f = 1 kHz to 20 kHz
25°C
VCC = 15 V,
VID = 1 V,
VO = 0
25°C
−20
Full range
−10
25°C
10
VCC = 15 V,
VID = −1 V,
VO = 15 V
VID = −1 V,
27
nA
−250
26
28
mV
50
−500
RL = 10 kΩ
Common-mode
rejection ratio
ICC
−300
RL = 2 kΩ
CMRR
Short-circuit
output current
−20
0 to
VCC − 2
VCC = 15 V, VO = 1 V to 11 V,
RL ≥ 2 kΩ
IOS
−150
0 to
VCC − 2
Large-signal
differential voltage
amplification
7
150
Full range
AVD
3
2
0 to
VCC − 1.5
RL ≤ 10 kΩ
Output current
30
0 to
VCC − 1.5
VOL
IO
−20
Full range
Low-level
output voltage
MAX
9
25°C
VCC = MAX
UNIT
TYP §
100
25°C
High-level
output voltage
MIN
7
25°C
VOH
LM324
LM324K
15
120
−30
−60
−20
−30
−60
Source
−10
mA
20
10
30
12
20
Sink
Full range
5
VO = 200 mV
25°C
12
5
VCC at 5 V,
GND at −5 V
VO = 0,
25°C
±40
±60
±40
±60
VO = 2.5 V,
No load
Full range
0.7
1.2
0.7
1.2
VCC = MAX,
VO = 0.5 VCC,
No load
Full range
1.4
3
1.4
3
µA
30
mA
mA
† All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for
testing purposes is 26 V for LM2902 and 30 V for the others.
‡ Full range is −55°C to 125°C for LM124, −25°C to 85°C for LM224, and 0°C to 70°C for LM324.
§ All typical values are at TA = 25°C.
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
TEST CONDITIONS†
VCC = 5 V to
MAX,
VIC = VICRmin,
VO = 1.4 V
Non-A-suffix
devices
A-suffix
devices
∆VIO/∆T
Input offset voltage
temperature drift
RS = 0 Ω
IIO
Input offset current
VO = 1.4 V
∆IIO/∆T
Input offset current
temperature drift
IIB
Input bias current
VO = 1.4 V
VICR
Common-mode
input voltage range
VCC = 5 V to MAX
LM2902
TA‡
MIN
TYP §
25°C
3
Full range
Full range
2
50
2
300
mV
µV/°C
50
150
10
−20
−250
−20
−500
0 to
VCC − 1.5
0 to
VCC − 1.5
Full range
0 to
VCC − 2
0 to
VCC − 2
VCC − 1.5
VCC − 1.5
nA
pA/°C
−250
−500
25°C
25°C
Full range
22
RL ≥ 10 kΩ
Full range
23
AVD
Large-signal
differential voltage
amplification
VCC = 15 V, VO = 1 V to 11 V,
RL ≥ 2 kΩ
CMRR
Common-mode
rejection ratio
VIC = VICRmin
kSVR
Supply-voltage
rejection ratio
(∆VCC /∆VIO)
VO1/ VO2
Crosstalk
attenuation
Supply current
(four amplifiers)
2
7
RL = 2 kΩ
RL ≤ 10 kΩ
ICC
7
nA
V
25°C
VOL
IOS
UNIT
4
Full range
RL = 10 kΩ
24
5
27
20
100
5
25
20
mV
25°C
25
Full range
15
100
25°C
50
80
60
80
dB
25°C
50
100
60
100
dB
120
dB
V/mV
25°C
VCC = 15 V,
VID = 1 V,
VO = 0
25°C
−20
Full range
−10
25°C
10
Full range
5
Source
V
26
Full range
f = 1 kHz to 20 kHz
VCC = 15 V,
VID = −1 V,
VO = 15 V
VID = −1 V,
MAX
10
1
Full range
Low-level
output voltage
Short-circuit
output current
3
Full range
VCC = MAX
Output current
7
Full range
RL = 2 kΩ
IO
LM2902V
TYP §
25°C
25°C
High-level
output voltage
MIN
10
25°C
VOH
MAX
15
120
−30
−60
−20
−30
−60
−10
mA
20
10
12
20
Sink
5
µA
VO = 200 mV
25°C
30
VCC at 5 V,
GND at −5 V
VO = 0,
40
25°C
±40
±60
±40
±60
VO = 2.5 V,
No load
Full range
0.7
1.2
0.7
1.2
VCC = MAX,
VO = 0.5 VCC,
No load
Full range
1.4
3
1.4
3
mA
mA
† All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX VCC for
testing purposes is 26 V for LM2902 and 32 V for LM2902V.
‡ Full range is −40°C to 125°C for LM2902.
§ All typical values are at TA = 25°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
8
VO = 1.4 V
VCC = 30 V
Input offset current
Input bias current
Common-mode input
voltage range
IIO
IIB
VICR
VCC = 15 V, VO = 1 V to 11 V,
RL ≥ 2 kΩ
Large-signal differential
voltage amplification
Common-mode rejection ratio
Supply-voltage rejection ratio
(∆VCC /∆VIO)
Crosstalk attenuation
Output current
Short-circuit output current
Supply current
(four amplifiers)
AVD
CMRR
kSVR
VO1/ VO2
IO
IOS
ICC
−50
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
VO = 2.5 V,
Full range
Full range
25°C
25°C
Full range
12
5
1.4
0.7
±40
120
3
1.2
±60
20
12
5
10
−10
−20
65
70
25
50
27
26
VCC − 1.5
1.4
0.7
±40
30
20
−30
120
100
80
100
5
28
−15
2
2
TYP §
LM224A
† All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified.
‡ Full range is −55°C to 125°C for LM124A, −25°C to 85°C for LM224A, and 0°C to 70°C for LM324A.
§ All typical values are at TA = 25°C.
VO = 15 V,
No load
VCC at 5 V,
VO = 0
VCC = 30 V,
No load
VO = 200 mV
GND at −5 V,
VID = −1 V,
Sink
VCC = 15 V,
VID = −1 V,
VO = 15 V
10
−10
Full range
25°C
−20
25°C
Source
VCC = 15 V,
VID = 1 V,
VO = 0
65
70
25
50
27
26
25°C
25°C
25°C
Full range
25°C
Full range
Full range
Full range
VCC − 1.5
0 to
VCC − 2
0 to
VCC − 2
Full range
25°C
0 to
VCC − 1.5
0 to
VCC − 1.5
MIN
25°C
−100
25°C
Full range
30
Full range
10
2
MAX
25°C
100
TYP §
4
MIN
LM124A
Full range
25°C
TA‡
f = 1 kHz to 20 kHz
VIC = VICRmin
RL ≤ 10 kΩ
Low-level output voltage
RL ≥ 10 kΩ
VOL
VCC = 30 V
RL = 2 kΩ
High-level output voltage
VOH
RL = 2 kΩ
VO = 1.4 V
Input offset voltage
VCC = 5 V to 30 V,
VIC = VICRmin, VO = 1.4 V
TEST CONDITIONS†
VIO
PARAMETER
3
1.2
±60
−60
20
−100
−80
30
15
4
3
MAX
electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)
12
5
10
−10
−20
65
65
15
25
27
26
VCC − 1.5
0 to
VCC − 2
0 to
VCC − 1.5
MIN
1.4
0.7
±40
30
20
−30
120
100
80
100
5
28
−15
2
2
TYP §
LM324A,
LM324KA
3
1.2
±60
−60
20
−200
−100
75
30
5
3
MAX
mA
mA
µA
mA
dB
dB
dB
V/mV
mV
V
V
nA
nA
mV
UNIT
444444 4 4 4 4 4 4 4 44
SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
SLOS066R − SEPTEMBER 1975 − REVISED JANUARY 2005
operating conditions, VCC = ±15 V, TA = 25°C
PARAMETER
TEST CONDITIONS
TYP
UNIT
SR
Slew rate at unity gain
V/µs
Unity-gain bandwidth
RL = 1 MΩ, CL = 30 pF, VI = ±10 V (see Figure 1)
RL = 1 MΩ, CL = 20 pF (see Figure 1)
0.5
B1
Vn
1.2
MHz
Equivalent input noise voltage
RS = 100 Ω, VI = 0 V, f = 1 kHz (see Figure 2)
35
nV/√Hz
VCC+
−
VI
VO
+
VCC−
CL
RL
Figure 1. Unity-Gain Amplifier
900 Ω
VCC+
100 Ω
−
VI = 0 V
RS
+
VO
VCC−
Figure 2. Noise-Test Circuit
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
PACKAGING INFORMATION
Orderable Device
Status (1)
5962-7704301VCA
ACTIVE
CDIP
J
14
1
TBD
77043012A
ACTIVE
LCCC
FK
20
1
TBD
7704301CA
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
7704301DA
ACTIVE
CFP
W
14
1
TBD
A42 SNPB
N / A for Pkg Type
77043022A
ACTIVE
LCCC
FK
20
1
TBD
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
Lead/Ball Finish
A42 SNPB
MSL Peak Temp (3)
N / A for Pkg Type
POST-PLATE N / A for Pkg Type
POST-PLATE N / A for Pkg Type
7704302CA
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
JM38510/11005BCA
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM124AFKB
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE N / A for Pkg Type
LM124AJ
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM124AJB
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM124D
ACTIVE
SOIC
D
14
50
TBD
CU NIPDAU
Level-3-245C-168 HR
CU NIPDAU
Level-3-245C-168 HR
LM124DR
ACTIVE
SOIC
D
14
2500
TBD
LM124FKB
ACTIVE
LCCC
FK
20
1
TBD
LM124J
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM124JB
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM124N
OBSOLETE
PDIP
N
14
TBD
Call TI
LM124W
ACTIVE
CFP
W
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM124WB
ACTIVE
CFP
W
14
1
TBD
A42 SNPB
N / A for Pkg Type
LM224AD
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224ADE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224ADR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224ADRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224AN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM224ANE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM224D
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224DE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224DG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224DR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224DRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224DRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224KAD
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224KADE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 1
POST-PLATE N / A for Pkg Type
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM224KADR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224KADRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224KAN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM224KANE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM224KD
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224KDE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224KDR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224KDRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM224KN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM224KNE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM224N
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM224NE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM2902D
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902DE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902DG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902DR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902DRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902DRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KAVQDR
ACTIVE
SOIC
D
14
2500
Pb-Free
(RoHS)
CU NIPDAU
Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2902KAVQPWR
ACTIVE
TSSOP
PW
14
2000
TBD
CU NIPDAU
Level-1-250C-UNLIM
LM2902KD
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KDB
ACTIVE
SSOP
DB
14
80
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KDBE4
ACTIVE
SSOP
DB
14
80
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KDBR
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KDBRE4
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KDE4
ACTIVE
SOIC
D
14
CU NIPDAU
Level-1-260C-UNLIM
50
Addendum-Page 2
Green (RoHS &
no Sb/Br)
Lead/Ball Finish
MSL Peak Temp (3)
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM2902KDR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KDRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM2902KNE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM2902KNSR
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KNSRE4
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KPW
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KPWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KPWR
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KPWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902KVQDR
ACTIVE
SOIC
D
14
2500
Pb-Free
(RoHS)
CU NIPDAU
Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2902KVQPWR
ACTIVE
TSSOP
PW
14
2000
TBD
CU NIPDAU
Level-1-250C-UNLIM
LM2902N
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM2902NE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM2902NSR
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902NSRG4
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902PW
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902PWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902PWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902PWLE
OBSOLETE
TSSOP
PW
14
LM2902PWR
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902PWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902PWRG4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM2902QN
OBSOLETE
PDIP
N
14
LM324AD
ACTIVE
SOIC
D
14
LM324ADBLE
OBSOLETE
SSOP
DB
14
LM324ADBR
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324ADBRE4
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
CU NIPDAU
Level-1-260C-UNLIM
TBD
50
Call TI
TBD
Call TI
Green (RoHS &
no Sb/Br)
CU NIPDAU
TBD
Addendum-Page 3
Lead/Ball Finish
Call TI
MSL Peak Temp (3)
Call TI
Call TI
Level-1-260C-UNLIM
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM324ADE4
ACTIVE
SOIC
D
14
LM324ADR
ACTIVE
SOIC
D
LM324ADRE4
ACTIVE
SOIC
LM324AN
ACTIVE
LM324ANE4
Lead/Ball Finish
MSL Peak Temp (3)
no Sb/Br)
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM324ANSR
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324ANSRE4
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324APW
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324APWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324APWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324APWLE
OBSOLETE
TSSOP
PW
14
LM324APWR
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324APWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324APWRG4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324D
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324DE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324DG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324DR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324DRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324DRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KAD
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KADE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KADG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KADR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KADRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KADRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
CU NIPDAU
Level-1-260C-UNLIM
TBD
Addendum-Page 4
Call TI
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM324KAN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM324KANE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM324KANS
PREVIEW
SO
NS
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KANSR
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KANSRE4
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KAPW
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KAPWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KAPWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KAPWR
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KAPWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KAPWRG4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KD
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KDE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KDR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KDRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM324KNE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
LM324KNS
PREVIEW
SO
NS
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KNSR
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KNSRE4
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KPW
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KPWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KPWR
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324KPWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324N
ACTIVE
PDIP
N
14
CU NIPDAU
N / A for Pkg Type
Lead/Ball Finish
MSL Peak Temp (3)
no Sb/Br)
25
Addendum-Page 5
Pb-Free
(RoHS)
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
LM324NE4
ACTIVE
PDIP
N
14
LM324NSR
ACTIVE
SO
NS
14
LM324NSRE4
ACTIVE
SO
NS
LM324NSRG4
ACTIVE
SO
LM324PW
ACTIVE
LM324PWE4
25
Pb-Free
(RoHS)
Lead/Ball Finish
MSL Peak Temp (3)
CU NIPDAU
N / A for Pkg Type
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324PWG4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324PWLE
OBSOLETE
TSSOP
PW
14
LM324PWR
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324PWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324PWRG4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
LM324Y
OBSOLETE
XCEPT
Y
0
TBD
TBD
Call TI
Call TI
Call TI
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 6
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
18
17
16
15
14
13
NO. OF
TERMINALS
**
12
19
11
20
10
A
B
MIN
MAX
MIN
MAX
20
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
28
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
9
22
8
44
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
23
7
52
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
24
6
68
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
84
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
B SQ
A SQ
25
5
26
27
28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140 / D 10/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a metal lid.
The terminals are gold plated.
Falls within JEDEC MS-004
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
0,15 M
15
0,25
0,09
8,20
7,40
5,60
5,00
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
2,00 MAX
0,10
0,05 MIN
PINS **
14
16
20
24
28
30
38
A MAX
6,50
6,50
7,50
8,50
10,50
10,50
12,90
A MIN
5,90
5,90
6,90
7,90
9,90
9,90
12,30
DIM
4040065 /E 12/01
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-150
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Low Power Wireless www.ti.com/lpw
Mailing Address:
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2006, Texas Instruments Incorporated
Similar pages