PRELIMINARY DATA SHEET | OCTOBER 9, 2008 NMOA8100 Series Erbium Doped Fiber Amplifier Applications CATV Supertrunking Redundant Ring Architectures High Power Distribution Networks FTTx networks Features High Saturation Output Power up to 27 dBm Dual Power Supplies, Redundant & Hot Swappable – AC or DC Front Panel Optical Input & Output Monitor ports SNMPv2 Control Interface Low Noise Figure for CATV Wide Input Dynamic Range Very Stable Output Power Over a Wide Operating Temperature Range Optional Automatic Gain Control or Constant Output Power Operation Optional Gain Flatness Specifications The NMOA8100 series product line is a family of state-of-the-art high performance CATV erbium doped fiber amplifiers (EDFA). Packaged in a convenient 1RU housing, this line of fiber amplifiers uses the latest DSP technology at the core of electrical control circuitry resulting in superior output power stability & exceptionally low noise figures demanded by CATV applications. The NMOA8100 provides very stable optical outputs over a wide operating temperature range. Internally it is supported with input and output isolators for enhanced system stability and performance. Optical power is continuously monitored at the input and output for automatic power control during operation over a wide operating temperature range. The NMOA8100 offers a rich set of features. These include remote management capability through SNMPv2 and telnet. The NMOA8100 also supports MIBs specified by SCTE (Society of Cable Television Engineers) for this product class. Additionally, the front panel’s LCD and button provides the operator with the option to both monitor the status of the amplifier and control/operate the amplifier locally. 1 of 4 For more information on this and other products: Contact Sales at EMCORE 626-293-3400, or visit www.emcore.com. NMOA8100 Series Fiber Amplifier PRELIMINARY DATA SHEET | OCTOBER 9, 2008 Optional Features • • • Monitors and Alarms • • • • • • • Automatic power control and/or automatic gain control modes. Port count, optical power, and connector style options Gain flattened options for WDM applications Loss of input signal Loss of output power Pump laser diode bias current Pump LD Temperature Case Temperature Redundant Power Supplies Redundant Fans Electrical Characteristics PROPERTY SYMBOL MIN AC Power Supply Voltage VAC 85 DC Power Supply Voltage VDC -36 Power Consumption Note 1 PTOT TYP MAX UNIT 265 VAC -72 VDC 10 W -48 Note 1: 10 W valid at 0 dBm input and 14 dBm output power within specified operating temperature range. Contact Emcore Sales for specific model datasheets. General Optical Characteristics PROPERTY Wavelength Range Input Power Total Output Power Options Note 1 Output Power Delta to Nominal Output Port Count Options (SC) SYMBOL MIN TYP MAX UNIT VAC 1528 1550 1562 nm PIN -10 0 12 dBm POUT 14 27 dBm POUTΔ -0.5 0.5 dB - 1 10 Notes 1, 2 Noise Figure Note 3 NF 5.0 dB Optical Isolation ISO 30 dB Input Power Alarm LOS -12 -11 -10 dBm Input Monitor Loss IMON 22 23 24 dB Output Monitor Loss OMON 19 20 Note 1: Total output power and number of ports varies by model type. Contact Emcore Sales for model specific datasheets 21 dB MAX UNIT Note 2: Model types are specified by output power per port Note 3: Test Condition with Input Power = 0 dBm (@ 1550nm) Note 4: Specifications valid within operating temperature range. Absolute Maximum Ratings PROPERTY Operating Temperature Range SYMBOL MIN TO 0 TYP 50 o C Storage temperature Range TS -40 85 o Relative Humidity H 0 95 % C 2 of 4 EMCORE Broadband 2015 West Chestnut Street Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com Copyright 2008. EMCORE Corporation NMOA8100 Series Fiber Amplifier PRELIMINARY DATA SHEET | OCTOBER 9, 2008 Outline Drawing 3 of 4 EMCORE Broadband 2015 West Chestnut Street Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com Copyright 2008. EMCORE Corporation NMOA8100 Series Fiber Amplifier PRELIMINARY DATA SHEET | OCTOBER 9, 2008 Model Number Information □□□–□□□□–□0□□ NMOA8100 Integrated WDM Output Power per Port BLANK – None GFF – Gain Flattened Filter for DWDM applications xx – xxdBm/port (Maximum: xx = 27dBm for 1 port) Number of Output Ports 01 – 1 port 02 – 2 ports 04 – 4 ports 08 – 8 ports 10 – 10 ports Optics Output Location 1 – SC/APC 2 – FC/APC 4 – SC/UPC 5 – FC/UPC 0 – Front 1 – Rear Power Supply 1 – AC primary 2 – DC primary 3 – AC primary, AC secondary 4 – AC primary, DC secondary 5 – DC primary, DC secondary Note 1: Not all configurations are available; please contact your EMCORE Sales representative. e.g. NMOA8100-1401-1005 (14 dBm per port, 1 port, SC/APC, front fiber, dual DC) e.g. NMOA8100-1708-1003 (17 dBm per port, 8 ports, SC/APC, front fiber, dual AC) Laser Safety Information FDA/CDRH Class IIIb and IEC 60825 Class 3B laser product All versions are Class 3B laser products per IEC 60825-1:1993 Caution: Use of controls, adjustment and procedures other than those specified heirin may result in hazardous laser radiation exposure. Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of the product at any time without notice. EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation. 4 of 4 EMCORE Broadband 2015 West Chestnut Street Alhambra, California 91803-1542 Tel: 626-293-3400 Fax: 626-293-3428 www.emcore.com Copyright 2008. EMCORE Corporation