EX-200 Evacuated Miniature Crystal Oscillator EX-200 Description The EX-200 Series offers a ruggedized hybrid thick film construction in a low profile hermetically sealed 16pin DDIL package, which can withstand severe environmental conditions. This product utilizes VI’s EMXO technology resulting in excellent stability performance and fast warm-up with low power consumption. Features • • • • Applications Ruggedized hybrid thick film construction Low Power Consumption Previous Model: EX-240 series Frequency Range: 10 MHZ - 20 MHZ • Severe Environmental Conditions Performance Specifications Frequency Stabilities1 Parameter vs. operating temperature range (referenced to +25°C) Min -20 -30 -50 Typ Max Units Condition +20 +30 +50 ppb ppb ppb -0… +70°C -20… +70°C -40… +85°C Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Performance Specifications Frequency Stabilities1 Parameter Initial Tolerance (for fixed frequency) vs. supply voltage change vs. load change vs. aging / day vs. aging / 1 year vs. aging / 10 year vs. aging / 10 year vs. aging / 10 year Min Typ -1.0 -10 -10 -2.0 -200 -1000 -1500 -2000 Warm-up Time Max Units Condition +1.0 +10 +10 +2.0 +200 +1000 +1500 +2000 ppm ppb ppb ppb ppb ppb ppb ppb at time of shipment, nominal EFC VS ± 5% Load ± 5% after 7 days of operation 90 120 seconds seconds to ± 1ppm of final frequency @+25°C to ± 100ppb of final frequency @+25°C 10 to <12MHz 12 to <16MHz 16 to 20MHz Supply Voltage (Vs) Supply voltage (Standard) 4.75 5.0 5.25 VDC Supply voltage (Option) 3.135 3.3 3.465 VDC 2.5 0.7 Watts Watts Power Consumption during warm-up steady state @ +25°C RF Output Signal [Standard] HCMOS 15 Load pF Signal Level (Vol) 0.1 VDC 0.9 Signal Level (Voh) VDC Rise/Fall Time 40 Duty cycle +7 ns (10-90%) 60 % (Voh-Vol)/2 Sinewave Signal [Option] 50 Load Output Power (Standard) Output Power (Option) Harmonics Sub-Harmonics ohm 0 +1.5 +3.0 dBm 50 ohm load +3.0 +4.5 +6.0 dBm 50 ohm load -25 dBc -60 dBc Frequency Tuning (EFC) Tuning Range Fixed; No adjust Tuning Range Sufficient to compensate for 10 years aging EFC (0V to 4Vdd) Additional Parameters Phase Noise @ 10 MHz G-Sensitivity Allan Deviation -100 -130 -140 -145 -150 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 1 ppb/g Test at 10g sine vibration at 100Hz 0.2 ppb Tau = 1 sec Environmental Conditions (Designed to meet) • Mechanical Shock (survive) MIL-STD-202, Test Method 213, Condition E (100G, 0.5msec) • Vibration Random (survive) MIL-STD-202, Test Method 214, Condition I-H (20Grms, 3 minutes/axis) • Vibration Sine (survive) MIL-STD-202, Test Method 204, Condition D (20Grms, 20 minutes/axis) • Thermal Shock (survive) MIL-STD-202, Test Method 107, Condition A-2 (50 Cycles, -55°C to +85 °C) Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Outline Drawing / Enclosure Dimensions in inches Type A Code Height “H” Pin Length “L” 0 0.35” 0.17” Pin Connections 1 EFC \ No Connect 2-4 No Connect 8 Ground (Case) 9 RF Output 13 - 15 No Connect 16 Supply Voltage Input Recommended Reflow Profile Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com Ordering Information EX - 200 0 - D A J - 508 0 - 10M0000000 Frequency Product Family EX: EMXO Package 25 x 25 mm Height 0: A0.35” Stability Code 208: ±20ppb 308: ±30ppb 508: ±50ppb Supply Voltage D: 5 Vdc E: 3.3 Vdc RF Output Code A: HCMOS E: Sinewave Frequency Control 0: Fixed Frequency (HCMOS) 1: Fixed Frequency (0 dBm) 2: Fixed Frequency (+3 dBm) 3: Electrical Tuning (HCMOS) 4: Electrical Tuning (0 dBm) 5: Electrical Tuning (+3 dBm) Temperature Range E: -40°C to +85°C J: -20°C to +70°C T: 0°C to +70°C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Europe: Asia: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 11-25-2008 daf Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com