ES1A THRU ES1J SURFACE MOUNT SUPER FAST RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 1.0 Ampere FEATURES SMA(DO-214AC) The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ● For surface mounted applications ● ● Super fast switching for high efficiency .062(1.60) .055(1.40) Low reverse leakage ● Built-in strain relief,ideal for automated placement ● High forward surge current capability ● High temperature soldering guaranteed: 250℃/10 seconds at terminals ● .114(2.90) .098(2.50) .181(4.60) .157(4.00) .012(.305) .006(.152) MECHANICAL DATA .103(2.62) .079(2.00) Case: JEDEC DO-214AC molded plastic body Terminals: Solder plated , solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight : 0.064 grams (approx.) .060(1.52) .030(0.76) .208(5.28) .188(4.80) .008(.203) .002(.051) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol ES1A ES1B ES1C ES1D ES1E ES1G ES1J Unit VRRM VRWM VR 50 100 150 200 300 400 600 V VR(RMS) 35 70 105 140 210 280 420 V Average Rectified Output Current @TC = 100°C IO 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Forward Voltage VFM @IF = 1.0A Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 125°C 0.95 1.3 1.7 V IRM 5.0 500 µA Reverse Recovery Time (Note 1) trr 35 nS Typical Junction Capacitance (Note 2) Cj 10 pF Tj, TSTG -55 to +150 °C Operating and Storage Temperature Range Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. ES1A THRU ES1J 1.00 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) RATINGS AND CHARACTERISTIC CURVES Single phase half wave Resistive or Inductive load 0.75 0.50 0.25 0 0 25 50 75 100 125 150 Tj = 25°C Pulse width = 300µs 10 ES1J 0.1 0.01 0 175 Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 20 10 0.6 0.8 1.0 100 1 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance (+) (-) +0.5A 10Ω NI Device Under Test (-) Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) 1.4 Tj = 25°C f = 1.0MHz trr 50Ω NI (Non-inductive) 1.2 10 1 0 10 NUMBER OF CYCLES AT 60Hz 0.4 100 Pulse width 8.3 ms single half-sine-wave (JEDEC method) 1 0.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TL , TEMPERATURE ( ° C) Fig. 1 Forward Current Derating Curve 30 - ES1G - ES1D 1.0 0A -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit 100