Datatronic DR341-121 Self-leaded smd inductor Datasheet

February 27, 2007
SELF-LEADED SMD INDUCTOR DR341 SERIES
Features
z
z
z
z
z
z
Low Profile Surface Mount Design
Flat Top for Pick and Place
Inductance Range from 26µH to 260µH
Tape & Reel Packing
Operating Temp. -40°C to +85°C
Tinned Leads with Leaded Solder is Available (note 3)
ELECTRICAL SPECIFICATIONS AT 25ºC
INDUCTANCE ( µH)
±20% @100KHz, 0.1V
26
39
55
79
120
180
260
PART No.
DR341-260
DR341-390
DR341-550
DR341-790
DR341-121
DR341-181
DR341-261
DCR (Ω)
±20%
0.62
0.80
1.00
1.50
1.80
2.80
3.40
RATED CURRENT
(A) Nominal
0.45
0.34
0.30
0.25
0.20
0.16
0.13
ETop @100KHz
(V-µSec) Ref.
6.6
6.6
6.6
9.9
13.2
16.5
23.1
MECHANICAL OUTLINES
8.64
[0.340]
8.64
[0.340]
6.86 Max.
[0.270 Max.]
6.60
[0.260]
DR341
DATE
FRONT VIEW
SIDE VIEW
BOTTOM VIEW
11.18
[0.440]
1
2.00
[0.079]
6.60
[0.260]
2
SCHEMATIC
PCB SOLDER PAD LAYOUT (REF.)
NOTES:
1. All dimensions are shown in millimeters “mm” [inches “in”].
2. General tolerance ±0.25mm [0.010 in.], unless otherwise specified.
3. For non-RoHS parts replace DR prefix with 42- (e.g. DR341 becomes 42-341).
4. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C.
DATATRONIC:
28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701
Email: [email protected]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.
Similar pages