1733 Reader's Spreads pg1-203:document 1/27/09 4:07 PM Page 70 MRP resistors precision metal film resistor SIP network EU features • • • • • • Custom design network Ultra-precision performance for precision analog circuits Tolerance to ±0.1%, matching to 0.05% T.C.R. to ±25ppm/°C, tracking to 2ppm/°C Marking: Black body color with white marking Products with lead-free terminations meet EU RoHS requirements dimensions and construction L D Type L (max.) MRPL03 h MRPA03 H .335 (8.5) Dimensions inches (mm) D (max.) P H .098 (2.5) .100±.008 (2.54±0.2) B .118±.02 (3.0±0.5) h (max.) .256 (6.5) .335 (8.5) .01±.02 (0.25±0.5) P P x No. of Pins ordering information New Part # MRP L03 Type Size L03 A03 E A D 103/103 T.C.R. (ppm/˚C) E: ±25 C: ±50 T.C.R. Tracking A: 2 Y: 5 T: 10 Termination Material D: SnAgCu Resistance Value 3 significant figures/ 3 significant figures Tolerance B: ±0.1% C: ±0.25% D: ±0.5% F: ±1.0% custom circuit ordering information New Part # MRP Type A Tolerance Ratio E: 0.025% A: 0.05% B: 0.1% C: 0.25% D: 0.5% KxxxxD Custom Code Factory will assign applications and ratings Ratings Power Rating (mW) Type Element Package Absolute T.C.R. T.C.R. Tracking Resistance Resistance Range* Tolerance Maximum Working Voltage Maximum Overload Voltage Rated Operating Ambient Temperature Temperature Range A: 2 B: ±0.1% (R1/R2≤10) C: ±0.25% -55°C to 100 200 +70°C 50-100k 100V 200V Y: 5 D: ±0.5% +125°C MRPA03 T: 10 F: ±1% * Resistance combination for R1, R2 is standardized to 200/20k, 1k/1k, 1k/2k, 1k/4k, 1k/9k, 1k/10k, 1k/20k, 10k/10k, 10k/100k, 50k/50k, 100k/100k MRPL03 E: ±25 C: ±50 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 72 11/14/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 1733 Reader's Spreads pg1-203:document 1/27/09 4:07 PM Page 71 PMS 300 neg. Black neg. precision metal film resistor SIP network applications and ratings (cont.) Resistance Range Resistance Ratio Tolerance Absolute Resistance Tolerance E: 0.025% A: 0.025% B: 0.1% B: ±0.1% 50Ω - 100kΩ 50Ω - 100kΩ C: ±0.25% 50Ω - 100kΩ 50Ω - 100kΩ D: ±0.5% 50Ω - 100kΩ F: ±1% 50Ω - 100kΩ 100 max. R1/R2 Relative Resistance Ratio C: 0.25% D: 0.5% 50Ω - 100kΩ ––– ––– 50Ω - 100kΩ 50Ω - 100kΩ ––– 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 50Ω - 100kΩ 100 max. 150 max. 150 max. 150 max. standard circuit schematic R1 R2 custom circuit schematics X W V Z environmental applications Derating Curve 100 (Examples only. Contact factory for other custom layout requests.) % Rated Power 80 SOP Package 60 40 20 0 -60 -40 -55 * Contact factory for SOP requests -20 0 20 40 60 80 70 Ambient Temperature (°C) 100 120 140 125 Performance Characteristics Parameter Rapid Change of Temperature Short Time Overload Dielectric Withstanding Voltage Resistance to Solder Heat Insulation Resistance Solvent Resistance Moisture Resistance Load Life Requirement ±(0.1% + 0.05Ω) ±(0.05% + 0.05Ω) ±(0.1% + 0.05Ω) ≥10,000MΩ No abnormality ±(0.1% + 0.05Ω) Test Method -55°C/30 min., room temp./2-3 min., +125°C/30 min., room temp/2-3 min., 5 cycles Rated voltage x 2.5 or max. overload voltage, whichever is less, 5 seconds AC 500V for 1 minute +350°C for 3.5 seconds DC 500V for 1 minute 2-propanol, +20°C to +25°C for 180 seconds 40°C, 90 - 95% RH, 1000 hours, rated voltage DC, 1.5 hr ON, 0.5 hr OFF cycle 70°C, 1000 hours, rated voltage DC, 1.5 hr ON, 0.5 hr OFF cycle Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/22/08 KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com 73 resistors MRP