Aluminum Electrolytic Capacitors/ ED Radial Lead Type Series: ED Type: ✽Propose EE series for New design A ■ Features ● ● ● ● High ripple current (at high frequency) Endurance : 105 °C 8000 h to 10000 h Including low profile products (20 mm height) RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ –25 °C to +105 °C 160 V .DC to 450 V .DC 10 µF to 330 µF ±20 % (120 Hz/+20 °C) I < 0.06 CV +10 (µA) After 2 minutes application of rated working voltage at +20 °C Please see the attached standard products list Endurance After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage),when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration : φ10=8000 hours, φ12.5 to φ18=10000 hours Capacitance change ±20 % of initial measured value tan δ < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life ■ Ripple current Frequency Coefficient Frequency (Hz) Cap.(µF) Cap. < 100 µF 100 µF < Cap. 50 < f < 120 120 < f < 300 300 < f < 1 k 1 k < f < 10 k 10 k < f < 30 k 30 k < f <100 k 0.30 0.40 0.55 0.70 0.90 1.00 0.35 0.45 0.60 0.75 0.90 1.00 ■ Dimensions in mm (not to scale) Sleeve Pressure relief [mm] φd±0.05 + L±2.0 14 min. 3 min. φD±0.5 F±0.5 – (mm) Body Dia. φD 10 12.5 16 18 Lead Dia. φd 0.6 0.6 0.8 0.8 Lead space F 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE199 – sn – 02 Oct. 2010 Aluminum Electrolytic Capacitors/ ED ■ Standard Products Case size W.V. Cap. (±20 %) Dia. (V) (µF) (mm) 22 33 47 68 82 10 10 10 12.5 12.5 12.5 16 16 18 16 18 18 10 10 12.5 12.5 16 16 16 18 16 18 18 10 12.5 12.5 16 16 16 18 16 18 18 18 10 12.5 16 16 18 16 18 18 18 160 100 150 220 330 22 33 47 68 200 82 100 150 220 330 22 33 47 68 250 82 100 150 220 10 22 33 350 47 68 82 100 Specification Ripple tan δ EndurCurrent ance Length (100 kHz) (120 Hz) (+105 °C) (+20 °C) (mm) (mA r.m.s.) (hours) 20 20 20 20 25 25 20 25 20 31.5 25 31.5 20 20 20 25 20 20 25 20 25 31.5 40 20 20 25 20 20 25 20 31.5 25 31.5 40 20 20 20 25 20 31.5 25 25 31.5 500 580 750 950 1060 1170 1280 1400 1400 1700 1500 2000 600 650 790 950 1000 1100 1300 1280 1400 2000 2400 560 710 920 990 1000 1200 1200 1500 1500 1800 2100 350 480 640 800 800 1100 1000 1100 1200 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 8000 8000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 8000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 8000 10000 10000 10000 10000 10000 10000 10000 10000 Lead Length Lead Lead Space Dia. Taping Straight ✽B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 Min. Packaging Q'ty Part No. EEUED2C220( ) EEUED2C330( ) EEUED2C470( ) EEUED2C680( ) EEUED2C820( ) EEUED2C101( ) EEUED2C101S( ) EEUED2C151( ) EEUED2C151S( ) EEUED2C221 EEUED2C221S( ) EEUED2C331 EEUED2D220( ) EEUED2D330( ) EEUED2D470( ) EEUED2D680( ) EEUED2D680S( ) EEUED2D820S( ) EEUED2D101( ) EEUED2D101S( ) EEUED2D151( ) EEUED2D221 EEUED2D331 EEUED2E220( ) EEUED2E330( ) EEUED2E470( ) EEUED2E470S( ) EEUED2E680S( ) EEUED2E820( ) EEUED2E820S( ) EEUED2E101 EEUED2E101S( ) EEUED2E151 EEUED2E221 EEUED2V100( ) EEUED2V220( ) EEUED2V330S( ) EEUED2V470( ) EEUED2V470S( ) EEUED2V680 EEUED2V680S( ) EEUED2V820S( ) EEUED2V101 Straight Taping Leads (pcs.) (pcs.) 200 200 200 200 200 200 100 100 100 100 100 50 200 200 200 200 100 100 100 100 100 50 50 200 200 200 100 100 100 100 100 100 50 50 200 200 100 100 100 100 100 100 50 500 500 500 500 500 500 250 250 250 250 500 500 500 500 250 250 250 250 250 500 500 500 250 250 250 250 250 500 500 250 250 250 250 250 Endurance : 105 °C φ10=8000 h, φ12.5 to φ18=10000 h When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE200 – sn – 01 Oct. 2008 Aluminum Electrolytic Capacitors/ ED ■ Standard Products Case size W.V. Cap. (±20 %) Dia. (V) (µF) (mm) 10 15 10 12.5 12.5 16 16 16 18 18 18 12.5 12.5 16 16 18 18 18 22 400 33 47 68 82 10 15 22 450 33 47 68 Specification Ripple tan δ EndurCurrent ance Length (100 kHz) (120 Hz) (+105 °C) (+20 °C) (mm) (mA r.m.s.) (hours) 20 20 25 20 20 25 20 31.5 40 20 25 20 31.5 25 31.5 40 300 410 500 600 730 840 840 1200 1500 350 560 680 850 850 1000 1300 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 Lead Length Lead Lead Space Dia. Taping Straight ✽B (mm) (mm) (mm) 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.8 0.8 0.8 0.8 0.8 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 7.5 7.5 Min. Packaging Q'ty Part No. EEUED2G100( ) EEUED2G150( ) EEUED2G220( ) EEUED2G220S( ) EEUED2G330S( ) EEUED2G470( ) EEUED2G470S( ) EEUED2G680 EEUED2G820 EEUED2W100( ) EEUED2W150( ) EEUED2W220S( ) EEUED2W330 EEUED2W330S( ) EEUED2W470 EEUED2W680 Straight Taping Leads (pcs.) (pcs.) 200 200 200 100 100 100 100 50 50 200 200 100 100 100 50 50 500 500 500 250 250 250 250 500 500 250 250 Endurance : 105 °C φ10=8000 h, φ12.5 to φ18=10000 h When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE201 – sn – 01 Oct. 2008