MA-COM MA4VAT2000-1277T Hmic pin diode variable attenuator Datasheet

MA4VAT2000-1277T
HMIC PIN Diode Variable Attenuator
1.70 - 2.20 GHz
Features








RoHs and ELV compliant
Bandwidth: 1.70 GHz to 2.20 GHz
1.2 dB Insertion Loss, Typical
1.4:1 VSWR, Typical
24 dB Attenuation, Typical
40 dBm IIP3, Typical ( 1MHz Offset, @ +0dBm Pinc )
0-1.5 Volt Control Voltage.
User can add an External Resistor for higher
D.C. Voltage requirements.
Rev. V3
MLP 3mm Package
(Circuit Side View)
Extra Features




Usable Bandwidth: 1.20 GHz to 2.50 GHz
1.5 dB Insertion Loss, Max
2:1 VSWR, Max
23 dB Attenuation, Max
Description and Applications
M/A-COM’s MA4VAT2000-1277T is a HMIC PIN
Diode Variable Attenuator which utilizes an integrated 90
degree 3dB hybrid with a pair of Silicon PIN Diodes
to perform the required attenuation function as
Voltage (Current) is applied. This device operates
from 0 to 1.5 Volts at 260 uA typical control current
for maximum attenuation. The user can add external
biasing resistors to the bias ports for higher voltage
requirements as required.
M/A-COM’s MA4VAT2000-1277T PIN Diode
Variable Attenuator is designed for AGC Circuit
Applications requiring:
 Lower Insertion Loss
 Lower distortion through attenuation
 Larger dynamic range for wide spread
spectrum applications
PIN 1
PIN 16
PIN Configuration
PIN
Function
PIN
Function
1
GND
9
DC2
2
GND
10
GND
3
GND
11
GND
4
GND
12
DC1
5
GND
13
GND
6
RF2
14
GND
7
GND
15
RF1
8
GND
16
GND
Center Paddle is RF and D.C. Ground
RF Input/Output Ports are Functionally Symmetrical
Absolute Maximum Ratings1,2
Parameter
Maximum Ratings
Operating Temperature
-40 °C to +85 °C
Storage Temperature
-65 °C to +150 °C
Junction Temperature
+175 °C
RF C.W. Incident Power
+33 dBm C.W.
Reversed Current @ -30 V
l -50nA l
Control Current
50mA per Diode
1. All the above are at Room Temperature except as noted
2. Exceeding the above Limits may cause permanent damage
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4VAT2000-1277T
HMIC PIN Diode Variable Attenuator
1.70 - 2.20 GHz
Rev. V3
Electrical Specifications @ +25 °C
Parameter
Frequency Band
Unit
Min
Typ
Max
1.70 GHz – 2.20 GHz
dB
-
1.2
1.4
Input Return Loss
dB
11
16
-
Output Return Loss
dB
11
16
-
P1dB
dBm
30
33
-
IIP3
dBm
37
40
-
V
-
0V @ 0uA
-
dB
23
25
-
dB
17
20
-
No DC Bias Low Loss State
Insertion Loss
Control Voltage
DC Bias RF Attenuation State
Maximum Attenuation
1.70 GHz – 2.20 GHz
Input Return Loss @ Max Attenuation
Output Return Loss @ Max Attenuation
IIP3
dB
17
20
-
dBm
15
21
-
V
-
1.50V @ 260uA
-
Control Voltage @ Max Attenuation
Typical RF Performance Over Industry Designated RF Frequency Bands
Band
3,4
Phase
Freq
I. Loss
Att.
R. Loss
IIP3
(MHz)
(dB)
(dB)
(dB)
(dBm)
(Degree)
RX
1710-1785
1.2
23
13
40
-20º
TX
1805-1880
1.2
23
13
40
RX
1850-1910
1.2
23
13
40
TX
1930-1990
1.4
23
13
40
UMTS
RX
1920-1980
1.4
23
11
40
WCDMA/CDMA
TX
2110-2170
1.5
23
11
40
TD-S-CDMA
-
2010-2025
1.4
23
11
40
-25º
SCDMA
-
1800-2200
1.8
23
11
40
-25º
DCS
PCS
-Relative-
-20º
-25º
3. All are typical values only.
4. Relative phase is the measured Insertion Phase Difference between Insertion Loss and the 20dB Attenuation State.
(Please refer to the plots below)
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4VAT2000-1277T
HMIC PIN Diode Variable Attenuator
1.70 - 2.20 GHz
Rev. V3
Plots of Typical RF Characteristics @ + 25 °C
Typical Insertion Loss & Attenuation Plot
Typical Attenuation Vs Voltage Plot (@ 1950 MHz)
Typical Attenuation VS Voltage For MA4VAT2000-1277
30
-5
25
Attenuation (dB)
Attenuation (dB)
Typical Insertion Loss & Attenuation for MA4VAT2000-1277
0
-10
-15
-20
-25
20
15
10
5
-30
1.20
1.30
1.40
1.50
1.60
1.70
1.80
1.90
2.00
2.10
2.20
2.30
2.40
0
2.50
0
Frequency (GHz)
0V/0mA
0.70V/37uA
0.90V/86uA
1.11V/143uA
1.30V/190uA
1.40V/230uA
1.50V/260uA
0.6
0.8
1
1.2
1.4
1.6
Typical IIP3 Vs Attenuation Plot
Typical IP3 VS Attenuation for MA4VAT2000-1277
Typical Return Losses for MA4VAT2000-1277
0
60
-5
50
-10
40
-15
IP3 (dBm)
Return Loss (dB)
0.4
Voltage Applied (V)
Typical Return Loss @ All Attenuation Levels Plot
-20
-25
30
20
-30
10
-35
1.20
1.30
1.40
1.50
1.60
1.70
1.80
1.90
2.00
2.10
2.20
2.30
2.40
2.50
0V/0uA
0.70V/37uA
0.90V/86uA
1.11V/143uA
1.30V/190uA
1.40V/230uA
For Reference ONLY:
 Low Loss
 5 dB Attenuation
 10 dB Attenuation
 15 dB Attenuation
 20 dB Attenuation
 25 dB Attenuation
0
-10
-20
-30
-40
-50
-60
-70
-80
-90
1.40
1.50
1.60
1.70
1.80
1.90
2.00
2.10
2.20
10
2.30
2.40
15
20
Attenuation (dB)
Typical Relative Phase Shift vs Frequency per Voltage (Attenuation) for
MA4VAT2000-1277
1.30
5
1.50V/260uA
Typical Relative Phase Shift Per Attenuation
(Voltage) Plot
1.20
0
0
Frequency (GHz)
Relative Phase Shift (degree)
0.2
=
=
=
=
=
=
0V, @0uA
0.90V, @86uA
1.11V, @143uA
1.30V, @190uA
1.40V, @230uA
1.50V, @260uA
2.50
Frequency (GHz)
0V/0mA
0.70V/37uA
0.90V/86uA
1.11V/143uA
1.30V/190uA
1.40V/230uA
1.50V/260uA
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
25
MA4VAT2000-1277T
HMIC PIN Diode Variable Attenuator
1.70 - 2.20 GHz
Rev. V3
Package PIN Designation, External Components, and Equivalent Circuit
RFin/out
Cblock =10pF
Cbias = 10pF
Rexternal = 0 -Ohms
Cblock
Cbias
Rbias
INPUT
Control Current
Cbias
GND
Paddle
Cblock
RFout/in
Ordering Information
Part Number
Package
MA4VAT2000-1277T
Tape and Reel
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MA4VAT2000-1277T
HMIC PIN Diode Variable Attenuator
1.70 - 2.20 GHz
Rev. V3
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
Similar pages