5010 POWER INDUCTORS High-Reliability Power Inductors ML420PJB ■ High temperature materials allow operation in ambient temperatures up to 155°C. ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. Core material Ferrite Terminations Silver-palladium-platinum-glass frit Weight 70 – 75 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 1000/7″reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.02 mm pocket depth Recommended pick and place nozzle OD: 5 mm; ID: ≤ 2.5 mm Part number1 ML420PJB471MLZ ML420PJB821MLZ ML420PJB152MLZ ML420PJB222MLZ ML420PJB332MLZ ML420PJB472MLZ ML420PJB562MLZ ML420PJB682MLZ ML420PJB103MLZ ML420PJB153MLZ ML420PJB223MLZ ML420PJB333MLZ ML420PJB473MLZ ML420PJB683MLZ ML420PJB104MLZ ML420PJB124MLZ ML420PJB154MLZ ML420PJB224MLZ ML420PJB334MLZ ML420PJB474MLZ ML420PJB564MLZ ML420PJB684MLZ ML420PJB105MLZ Inductance2 ±20% (µH) 0.47 0.82 1.5 2.2 3.3 4.7 5.6 6.8 10 15 22 33 47 68 100 120 150 220 330 470 560 680 1000 DCR max3 (Ohms) 0.038 0.058 0.072 0.100 0.125 0.175 0.240 0.255 0.350 0.500 0.670 1.05 1.45 2.00 3.10 3.50 4.25 6.25 8.60 12.7 15.7 20.0 28.0 SRF (MHz)4 Isat (A)5 min typ 10% drop 20% drop 30% drop 203 290 3.1 3.3 3.4 136.5 195 2.3 2.5 2.6 117.6 168 1.7 1.8 1.9 100.8 144 1.4 1.5 1.6 73.5 105 1.1 1.2 1.3 53.2 76 0.95 1.1 1.1 52.5 75 0.90 0.97 1.00 49.7 71 0.82 0.90 0.93 35.7 51 0.66 0.72 0.74 27.3 39 0.55 0.59 0.62 22.4 32 0.47 0.51 0.53 18.2 26 0.38 0.42 0.43 14.0 20 0.31 0.34 0.36 10.5 15 0.26 0.29 0.30 8.40 12 0.21 0.23 0.24 7.70 11 0.20 0.22 0.23 6.30 9.0 0.18 0.20 0.21 4.90 7.0 0.15 0.16 0.17 3.85 5.5 0.12 0.13 0.14 3.15 4.5 0.090 0.11 0.11 2.80 4.0 0.090 0.10 0.10 2.59 3.7 0.090 0.097 0.10 2.10 3.0 0.087 0.096 0.10 1. When ordering, please specify testing code: ML427PJB335MLZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. 3. DCR measured on a micro-ohmmeter. ® 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. Typical DC current that causes the specified inductance drop from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. These parts are preproduction products for electrical evaluation only. Document ML536-1 Specification subject to change without notice. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2012 Irms (A)6 20°C rise 40°C rise 1.6 2.2 1.0 1.2 0.72 1.1 0.70 1.0 0.69 0.88 0.68 0.78 0.60 0.74 0.59 0.68 0.58 0.64 0.54 0.60 0.37 0.50 0.32 0.44 0.26 0.35 0.20 0.28 0.17 0.22 0.15 0.20 0.14 0.18 0.12 0.16 0.10 0.15 0.090 0.12 0.080 0.11 0.070 0.10 0.060 0.090 Phone 800-981-0363 Fax 847-639-1508 Revised 06/12/12 E-mail [email protected] Web www.coilcraft-cps.com 5010 POWER INDUCTORS ML420PJB Series (5010) Typical L vs Current Typical L vs Frequency 10000 10000 1000 µH 100 100 µH 10 10 µH 1 0.1 0.1 1 Current (A) 100 µH 100 10 µH 10 0.82 µH 1 0.82 µH 0.01 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 10 0.1 0.01 1 0.1 10 Frequency (MHz) Current Derating 0.189 ±0.004* 4,80 ±0,10 120 110 90 0.189 ±0.004* 4,80 ±0,10 80 Suggested Land Pattern 70 60 50 40 0.060 1,50 30 20 10 0 Isat Irms -55 -40 -20 0.138 3,50 0.090 2,30 0.0410 ±0.004 1,04 ±0,10 25°C Percent of rated current 100 45° typ 0.039 typ 1,00 0 20 40 60 80 100 120 0.197 5,00 0.134 0.090 3,40 2,30 140 160 Ambient temperature (°C) 0.039 typ 1,00 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. Dimensions are in ® inches mm These parts are preproduction products for electrical evaluation only. Document ML536-2 Specification subject to change without notice. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2012 0.060 1,50 0.134 3,40 0.197 5,00 Phone 800-981-0363 Fax 847-639-1508 Revised 06/12/12 E-mail [email protected] Web www.coilcraft-cps.com