MASW-008330
V
GaAs
SP3T 2.5 V Switch
DC - 3.0 GHz
Rev. V1
Features
Functional Schematic
Low Voltage Operation: 2.5V
Low Insertion Loss: 0.3 dB at 1 GHz
0.5 micron GaAs PHEMT Process
Lead-Free 2 mm 8-Lead PDFN Package
100% Matte Tin Plating over Copper
Halogen-Free ―Green‖ Mold Compound
260°C Reflow Compatible
RoHS* Compliant version of MASWSS0028
100 pF
Description
M/A-COM’s MASW-008330 is a GaAs PHEMT
MMIC single pole three throw (SP3T) switch in a
lead-free 2 mm 8-lead PDFN package. The MASW008330 is ideally suited for applications where low
control voltage, low insertion loss, high isolation,
small size and low cost are required.
RFC
RF3
GND
V3
V1
V2
RF1
RF2
100 pF
100 pF
100 pF
Pin Configuration
Pin No.
Function
Description
Typical applications are for filter and antenna
switching in handset systems that connect separate
receive functions to a common antenna, as well as
other related handset and general purpose
applications. This part can be used in all systems
operating up to 3 GHz requiring low control voltage.
1
RFC
RF In/Out
2
GND
RF Ground
3
V1
Control 1
4
RF1
RF In/Out
5
RF2
RF In/Out
The MASW-008330 is fabricated using a 0.5 micron
gate length GaAs PHEMT process. The process
features full passivation for performance and
reliability.
6
V2
Control 2
Ordering Information1
7
V3
Control 3
8
RF3
RF In/Out
Absolute Maximum Ratings 3,4
Part Number
Package
Parameter
Absolute Maximum
MASW-008330-TR3000
3000 piece reel
+32 dBm
MASW-008330-TR3000
3000 piece reel
Max Input Power
(0.5 - 3 GHz, 2.5V Control)
Sample Test Board
(Includes 5 samples)
Voltage
±8.5 volts
MASW-008330-001SMB
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
1. Reference Application Note M513 for reel size information.
2
Truth Table
V1
V2
V3
RFC RF1
RFC RF2
RFC RF3
0
1
0
On
Off
Off
1
0
0
Off
On
Off
0
0
1
Off
Off
On
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM does not recommend sustained operation near
these survivability limits.
2. 0 = 0 V ± 0.2 V, 1 = +2.5 V to +5 V.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-008330
GaAs SP3T 2.5 V Switch
DC - 3.0 GHz
Rev. V1
Electrical Specifications: TA = 25°C, VC = 0 V / 2.5 V, Z0 = 50 Ω 5
Parameter
Test Conditions
Units
Min.
Typ.
Max.
Insertion Loss 6
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
dB
dB
dB
—
—
—
0.3
0.5
0.75
0.4
0.6
1.0
Isolation
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
dB
dB
dB
19
13
10
24
18
14
—
—
—
Return Loss
DC - 2.5 GHz
2.5 - 3 GHz
dB
dB
—
—
25
20
—
—
IP3
Two Tone, +0 dBm/tone, 1 MHz Spacing,
> 50 MHz
dBm
—
50
—
P1dB
—
dBm
—
21
—
Trise, Tfall
10% to 90% RF, 90% to 10% RF
nS
—
13
—
Ton, Toff
50% control to 90% RF and 50% control to 10% RF
nS
—
15
—
Transients
In Band
mV
—
30
—
Control Current
|VC| = 2.5V
µA
—
1
10
5. External DC blocking capacitors are required on all RF ports.
6. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 100 pF for 100 - 500 MHz, 39 pF for 0.5 - 3 GHz.
Lead Free 2 mm 8-lead PDFN †
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-008330
GaAs SP3T 2.5 V Switch
DC - 3.0 GHz
Rev. V1
Typical Performance Curves vs. Frequency and Temperature
Isolation
Insertion Loss
30
1.0
25
0.8
Insertion Loss +25C
Insertion Loss +85C
Insertion Loss -40C
20
0.6
15
0.4
10
Isolation +85C
Isolation +25C
Isolation -40C
5
0
0.5
1.0
0.2
1.5
2.0
2.5
3.0
0.0
0.5
1.0
Frequency (GHz)
1.5
2.0
2.5
3.0
Frequency (GHz)
Return Loss
Qualification
Qualified to M/A-COM specification REL-201,
Process Flow –2.
45
Return Loss +85C
Return Loss +25C
Return Loss -40C
40
35
Handling Procedures
30
Please observe the following precautions to avoid
damage:
25
Static Sensitivity
20
15
0.5
1.0
1.5
2.0
Frequency (GHz)
2.5
3.0
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
MASW-008330
GaAs SP3T 2.5 V Switch
DC - 3.0 GHz
Rev. V1
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
4
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support