LVL1 GTL-2891 Stacking up to 8 switches in one stack Datasheet

GTL-2891 하드웨어 버전: 1
28-Port Stackable L3 Managed Gigabit Switch, 2 x
10-Gigabit SFP+, 1 x 10-Gigabit Module Slot
The GTL-2891 are a family of high-performance Gigabit Ethernet Layer 3 switches featuring 28 ports; with
24 10/100/1000BASE-T ports, 2 10G SFP+ ports, and one 10G dual port expansion slot. The switches are ideal
for high-performance server aggregations, such as enterprise data centers, where they can connect high-end or networkattached files servers over fiber ports. They can also be deployed as a backbone upgrade, or to provide Gigabit–to-thedesktop for power users. These switches are packed with features and are a cost-effective solution that bring
continuous availability, enhanced security, and advanced QoS to the network edge, while maintaining simplicity of
management.
Key Features
-
Dynamic ARP Inspection (DAI) protects switches against ARP spoofing
Stacking up to 8 switches in one stack
Support Operations, Administration, and Maintenance (OAM) mechanisms
Ethernet Ring Protection Switching (ERPS) for Ethernet ring topologies with sub-50 ms failover capabilities
IEEE 802.1d/w 신장 트리 프로토콜(STP) 및 포트 미러링
자동 포트 애그리게이트용 IEEE 802.3ad LACP
Supports port-based VLAN, IEEE 802.1Q VLAN Tagging
트래픽 우선순위 지정 및 대역폭 관리를 위한 QoS 제어
제품사양
System Specifications
Standards & Protocols:
IEEE 802.1p Quality of Service (QoS)
IEEE 802.1x port authentication
IEEE 802.3x Ethernet frame start and stop requests
and timers used for flow control on full-duplex links
IEEE 802.3u CSMA/CD access method and physical
layer specifications for 100 BASE-TX Fast Ethernet
IEEE 802.3z CSMA/CD access method and physical
layer specifications for 1000 BASE Gigabit Ethernet
IEEE 802.1q Virtual LAN
IEEE 802.1d Spanning Tree Protocol
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.1s Rapid Spanning Tree Protocol
IEEE 802.1w Multiple Spanning Tree Protocol
www.level1.com
Page 1 of 5
Memory:
Flash Memory : 128 MB
DRAM : 256 MB
Buffer Memory:
1.5 MB
Connectors and Cabling:
24 x 10/100/1000 Base-T & 2 x 10G SFP+ & 1 Slots for 2 x 10G Stacking /Uplink
Fiber cable : 50/125µm, 62.5/125µm
Indicator:
LED indicaters : Port, Uplink, System, Diagnoustic
Transmission Method:
Store and Forward
Power Input:
AC Input : 100 to 240 V, 50-60 Hz, 1.5 A
Power Consumption:
35 W
Features
General:
OAM :
IEEE 802.3ah Link
IEEE 802.1ag Connectivity Fault
Management (CFM)
ITU-T Y.1731 performance and
throughput management
Stacking Features :
IP Clustering up to 36 devices,
bandwidth up to 20G
Hardware Stacking up to 8 units,
bandwidth up to 20G
Quality of Service(QoS):
Traffic Classification based on
IEEE 802.1p CoS, IP Precedence,
IP DSCP
Traffic Scheduling based on Strict
Priority, Weighted Round Robin,
Strict + WRR traffic scheduling
IGMP Snooping
MVR (Multicast VLAN Registration)
QinQ/Selective QinQ
G.8032 (ERPSv1/v2)
IPv4/IPv6 dual protocl stack
Security:
Port security
802.1x
Access Control List
DHCP snooping
IP Source Guard
Dynamic ARP Inspection
DoS Protection
AAA
SSH v1.5/v2
SSL/HTTPS
Management access filter
PPPoE Intermediate Agent
www.level1.com
Page 2 of 5
Management:
CLI/WEB Based
Telnet/SNMP v1/v2/v3
RMON I (1,2,3, 9 group)
Software Download
Auto upgrade
Dual Image
BOOTP/DHCP
SNTP
DNS
IP clustering
Even/Error/System log
Port monitor MAC/VLAN
LLDP (802.1ab)
sFlow
Delay reload
L3:
Multi-netting (CIDR)
IP v4/v6 Unicast Routing :
ex. Static Route , ECMP , RIP v1/v2
& RIPng , OSPF v2/v3 , BGPv4+
IP v4/v6 Multicast Routing :
ex. PIM-DM/SM, PIM-DM6/SM6
VRRP
MLD v1/v2
ARP/Proxy ARP
IGMP/IGMP proxy v1/v2/v3
Ease of Use:
Yes
Performance
Backplane (Gbps):
Switching Bandwidth : 128 Gbps
Forwarding Performance : 95.23 Mpps
MAC Address Table:
16K
Data Transfer Rate:
GE:Resolution 64 Kbps ~ 1000 Mbps
10G:Resolution 64 Kbps~ 10000 Mbps
Packet Forwarding Rate:
95.24Mpps
Jumbo Frame (K):
10K
Environment
Power Saving:
Yes
Acoustic Noise:
No test report
Heat Dissipation:
Fanless
www.level1.com
Page 3 of 5
Temperature (°C):
Operating : 0oC to 45oC
Storage : -40oC to 70oC
Humidity (Non-condensing):
Operating/Storage : 10% to 90%
Physical Specifications
Dimensions (W x D x H mm):
44 x 31.5 x 4.4 cm
Weight (g):
3.7 Kg
Reliability
MTBF:
904,213 hr (25oC)
Approval and Compliance
EMI/EMS:
certification : FCC , CE , VCCI Class A
Safety:
Certification : CB , UL
Environmental Test:
Environmental Regulation compliance : WEEE , RoHS
도표
Order Information
GTL-2891
www.level1.com
Page 4 of 5
Package Contents
GTL-2891
Power Cord
19" Rackmount Kit
Rubber Feet
Quick Installation Guide
Resource CD (User Manual, QIG)
Console Cable
고해상도 이미지
MDU-0211
2-Port 10G SFP+ Module
No liability or responsibility for any errors or omissions in the content.
Specifications are subject to change without notice.
All mentioned brand names are registered trademarks and property of their owners.
Copyright © Digital Data Communications GmbH, Germany. All Rights Reserved.
www.level1.com
Powered by TCPDF (www.tcpdf.org)
Page 5 of 5
Similar pages