ON MUR3080 Power rectifier Datasheet

MUR3080
Preferred Device
SWITCHMODE
Power Rectifier
. . . designed for use in switching power supplies, inverters and as
free wheeling diodes, these state–of–the–art devices have the
following features:
•
•
•
•
•
http://onsemi.com
Ultrafast 75 ns (Typ) Soft Recovery Time
175°C Operating Junction Temperature
High Voltage Capability to 800 Volts
Low Forward Voltage Drop
High Temperature Glass Passivated Junction
ULTRAFAST
RECTIFIER
30 AMPERES
800 VOLTS
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 4.3 grams (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
1
4
3
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes:
•
•
4
260°C Max. for 10 Seconds
Shipped 30 Units Per Plastic Tube
Marking: U3080
MAXIMUM RATINGS
Rating
Symbol
Max
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
800
V
Average Rectified Forward Current
(Rated VR, TC = 70°C)
IF(AV)
30
A
Peak Repetitive Forward Current
(Rated VR, Square Wave,
20 kHz, TC = 150°C)
IFRM
30
A
Non–Repetitive Peak Surge Current
(Surge Applied at Rated Load
Conditions Halfwave, Single
Phase, 60 Hz)
IFSM
300
A
TJ, Tstg
–65 to +175
°C
Operating Junction and Storage
Temperature Range
1
3
TO–218
CASE 340E
STYLE 1
MARKING DIAGRAM
U3080
U3080 = Device Code
ORDERING INFORMATION
Device
MUR3080
Package
Shipping
TO–218
30 Units/Rail
Preferred devices are recommended choices for future use
and best overall value.
 Semiconductor Components Industries, LLC, 2001
July, 2001 – Rev. 4
1
Publication Order Number:
MUR3080/D
MUR3080
THERMAL CHARACTERISTICS
Rating
Thermal Resistance, Junction to Case
Symbol
Max
Unit
RθJC
1.0
°C/W
ELECTRICAL CHARACTERISTICS (Typical Data)
Instantaneous Forward Voltage (Note 1.)
@ IF = 30 Amps, TC = 25°C
@ IF = 30 Amps, TC = 100°C
VF
Instantaneous Reverse Current (Note 1.)
@ Rated DC Voltage, TC = 25°C
@ Rated DC Voltage, TC = 100°C
IR
Reverse Recovery Time
IF = 1.0 Amp, VR = 30 V, dI/dt = 50 A/µs
tRR
Volts
1.9
1.8
1. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤ 2.0%.
http://onsemi.com
2
100
5.0
µA
mA
110
ns
MUR3080
PACKAGE DIMENSIONS
TO–218 TWO LEAD
TO–218
CASE 340E–02
ISSUE A
B
C
Q
E
4
U
DIM
A
B
C
D
E
G
H
J
K
L
Q
S
U
V
A
S L
1
K
2
3
D
V
G
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982
2. CONTROLLING DIMENSION: MILLIMETER.
J
H
http://onsemi.com
3
MILLIMETERS
MIN
MAX
--20.35
14.70
15.20
4.70
4.90
1.10
1.30
1.17
1.37
10.80
11.10
2.00
3.00
0.50
0.78
31.00 REF
--16.20
4.00
4.10
17.80
18.20
4.00 REF
1.75 REF
STYLE 1:
PIN 1. CATHODE
3. ANODE
4. CATHODE
INCHES
MIN
MAX
--0.801
0.579
0.598
0.185
0.193
0.043
0.051
0.046
0.054
0.425
0.437
0.079
0.118
0.020
0.031
1.220 REF
--0.638
0.158
0.161
0.701
0.717
0.157 REF
0.069
MUR3080
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: [email protected]
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: [email protected]
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
http://onsemi.com
4
MUR3080/D
Similar pages