DDK CM02-8DP5SDD1-FG Devicenet micro-style connector Datasheet

DeviceNet Micro-Style Connectors
CM02 Series
Conforming
Standard
DeviceNet
◆ OUTLINE
The CM02 series is a Micro-style connector for
Wa t e r p r o o f
IP 67
use in a DeviceNet communication network.
These products provide connections between
simple industrial devices such as sensor,
actuators and higher-level devices such as controllers.
This connector system is also recommended for CCLink network and can be used in harsh environmental
conditions, having IP67 rated for protection against moisture, oil and dust.
◆ FEATURES
・Crimp termination for the cable mount plugs and jacks
・Receptacle : Soldering
Lock Type
・Protection from wiring errors by color-coding the contact holder with red, white, blue and black
Threaded
Coupling
・Available style are cable mount plug with socket contacts, cable mount jack with pin contacts, T tap, panel mount
receptacle with pin contacts, panel mount plug receptacle with socket contacts, terminating resistor and dust cap
◆ SPECIFICATIONS
Rated Current
3A/contact
Rated Voltage
24V DC
Dielectric Withstanding Voltage
500V AC(r.m.s) for 1 minute
Insulation Resistance
1000M Ω min. at 250V DC
Operating Temperature Range
- 40℃ to +85℃
Waterproof
IP67 when mated
No. of Contacts
5
Physical Configuration of Cables For Example
Jacket
DC Power Insulation
Color:Black
Conductor
Braid Shield
Data Insulation Colors : Blue & Yellow
Ground Insulation Color : White
AL / MY Shield
Data Insulation
Color:White
AL / MY Shield
Data Insulation
Color:Blue
AL / MY Shield
Braid Shield
Jacket
Drain Wire
DC Power Insulation
Color:Red
DeviceNet Thick Cable
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specifications with our drawings would be highly appreciated.
090206
http://www.ddknet.co.jp
Drain Wire
CC-Link Cable
RoHS
MATERIAL/FINISH
Item
Compliant
Compliant
Plug (With Socket Contacts)
Jack (With Pin Contacts)
Resistor (With Pin or Socket Contacts)
Insulator
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Contact
Copper Alloy/Gold Plating
Copper Alloy/Gold Plating
Copper Alloy/Gold Plating
Coupling Ring
Copper Alloy/Nickel Plating
Copper Alloy/Gold Plating
Copper Alloy/Gold Plating
Backshell Nut
Aluminum Alloy/Black
Aluminum Alloy/Black
Aluminum Alloy/Black
Contact Holder
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Backshell
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Clamp Nut
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
O-Ring
Synthetic Rubber/Black
Synthetic Rubber/Black
Gasket
Synthetic Rubber/Black
Bushing
Synthetic Rubber/Black
Item
T
Synthetic Rubber/Black
Synthetic Rubber/Black for Socket
Synthetic Rubber/Black
Tap
Receptacle
Plug Receptacle
(With Pin Contacts)
(With Socket Contacts)
Insulator
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Plastic(UL94V-0)/Black
Contact
Copper Alloy/Gold Plating
Copper Alloy/Gold Plating
Copper Alloy/Gold Plating
Coupling Ring
Zinc Alloy/Nickel Plating
Shell
Copper Alloy/Nickel Plating
Zinc Alloy/Nickel Plating
Nut Washer
Copper Alloy/Nickel Plating
Copper Alloy/Nickel Plating
Gasket(Mating Side)
Synthetic Rubber/Black
Gasket(Mounting Side)
Overmolding Resin
Synthetic Rubber/Black
Synthetic Rubber/Black
Synthetic Rubber/Black
Plastic(UL94V-0)/Black
CRIMP TOOL
・For DeviceNet Plug and Jack
the straight plug and the straight jack. Two kinds
A set of crimp tool for straight contacts
of crimp tools are needed since a connector has a
straight contact and angle contacts of which style
Hand Tool
Contents
Locator
are different. However the locater can be removed
and you can use one hand tool for termination if
Conductor Size
Item
Highly reliable crimp termination can be made for
Inspection Gauge 2
A set of crimp tool for angle contacts
you have two locators each for the straight contact
Hand Tool
and the angle contacts.
Locator
Contents
(4) angle contacts and the style of contact is only
Contents
one. It is feasible for you to terminate the cable to
357J-17917
357J-12610
357J-12610
357J-18918
357J-18918
357J-19779-2
357J-17900-2
357J-19812
357J-17898
357J-12610
357J-12610
357J-17899
357J-17899
357J-19779-1
357J-17900-1
Inspection Gauge 2
357J-19779-2
357J-17900-2
Conductor Size
AWG 18-AWG 20
A set of crimp tool for angle contacts
The connectors for CC-Link network will have four
AWG 18 - AWG 20
357J-19811
Inspection Gauge 1
Item
・For CC-Link Plug and Jack
AWG 22 - AWG 24
357J-21598
Hand Tool
357J-12610
Locator
357J-17899
Inspection Gauge 2
357J-17900-2
the contacts by one kind of the crimp tool for angle
contacts.
◆ CONFIGURATION OF CONTACTS
Straight Pin Contact
30.85
Angle Pin Contact
Straight Socket Contact
25.9
29.35
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
2
Angle Socket Contact
24.4
CM02 Series
Unit:mm
○ Straight Plug With Socket Contacts
・DeviceNet Plug
A set of plug consists of 1 body, 1 straight contact and 4 angle contacts
Applicable Cable
P/N
Conductor Size
Outside Dia.
AWG22 - AWG24
φ 6.5mm - φ 7.2mm
AWG22 - AWG24
φ 8.8mm - φ 9.8mm
AWG18 - AWG20
φ 6.5mm - φ 7.2mm
AWG18 - AWG20
φ 8.2mm - φ 8.9mm
AWG18 - AWG20
φ 9.4mm - φ 9.9mm
A set of plug : CM02A-8DP5S-D(02)
Body : CM02A-8DP5S-D(02)-0
Contents
Straight Contact : CM02A-SSC-2224
Angle Contact : CM02A-ASC-2224
A set of plug : CM02A-8DP5S-D(04)
Body : CM02A-8DP5S-D(04)-0
Contents
Straight Contact : CM02A-SSC-2224
Angle Contact : CM02A-ASC-2224
A set of plug : CM02A-8DP5S-D(02)(D9)
Body : CM02A-8DP5S(02)(D9)-0
Contents
Straight Contact : CM02A-SSC-1820
Angle Contact : CM02A-ASC-1820
A set of plug : CM02A-8DP5S-D
Body : CM02A-8DP5S-D-0
Contents
Straight Contact : CM02A-SSC-1820
Angle Contact : CM02A-ASC-1820
A set of plug : CM02A-8DP5S-D(01)
Body : CM02A-8DP5S-D(01)-0
Contents
Straight Contact : CM02A-SSC-1820
Angle Contact : CM02A-ASC-1820
A soldering style is also available. P/N : CM02A-8DP5S-D(02)(D4)
Applicable Cable : AWG16 max. conductor size φ 6.5mm - φ 7.2mm outside dia.
・CC-Link Plug
A set of plug consists of 1 body and 4 angle contacts
Applicable Cable
P/N
Conductor Size
Outside Dia.
A set of plug : CM02A-8DP5S-D(03)
Contents
Body : CM02A-8DP5S-D(03)-0
AWG18 - AWG20
φ 7.2mm - φ 7.9mm
Angle Contact : CM02A-ASC-1820
54
M12×1 Thread
φ23.6
φ8.1
φ21
A
A
(Contact No.1)
Red
White
(Contact No.2)
Black
Blue
(Contact No.5)
Section A−A
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
3
(Contact No.4)
(Contact No.3)
CM02 Series
Unit:mm
○ Straight Jack With Pin Contacts
・DeviceNet Jack
A set of Jack consists of 1 body, 1 straight contact and 4 angle contacts
Applicable Cable
P/N
Conductor Size
Outside Dia.
AWG22 - AWG24
φ 6.5mm - φ 7.2mm
AWG22 - AWG24
φ 8.8mm - φ 9.8mm
AWG18 - AWG20
φ 6.5mm - φ 7.2mm
AWG18 - AWG20
φ 8.2mm - φ 8.9mm
AWG18 - AWG20
φ 9.4mm - φ 9.9mm
A set of Jack : CM02A-8DJ5P-D(02)
Body : CM02A-8DJ5P-D(02)-0
Contents
Straight Contact : CM02A-SPC-2224
Angle Contact : CM02A-APC-2224
A set of Jack : CM02A-8DJ5P-D(04)
Body : CM02A-8DJ5P-D(04)-0
Contents
Straight Contact : CM02A-SPC-2224
Angle Contact : CM02A-APC-2224
A set of Jack : CM02A-8DJ5P-D(02)(D9)
Body : CM02A-8DJ5P-D(02)(D9)-0
Contents
Straight Contact : CM02A-SPC-1820
Angle Contact : CM02A-APC-1820
A set of Jack : CM02A-8DJ5P-D
Body : CM02A-8DJ5P-D-0
Contents
Straight Contact : CM02A-SPC-1820
Angle Contact : CM02A-APC-1820
A set of Jack : CM02A-8DJ5P-D(01)
Body : CM02A-8DJ5P-D(01)-0
Contents
Straight Contact : CM02A-SPC-1820
Angle Contact : CM02A-SPC-1820
A soldering style is also available. P/N : CM02A-8DJ5P-D(02)(D4)
Applicable Cable : AWG16 max. conductor size.
φ 6.5mm - φ 7.2mm outside dia.
・CC-Link Jack
A set of Jack consists of 1 body and 4 angle contacts
Applicable Cable
P/N
Conductor Size
Outside Dia.
A set of plug : CM02A-8DJ5P-D(03)
AWG 18 - AWG 20
Body : CM02A-8DJ5P-D(03)-0
Contents
φ 7.2mm - φ 7.9mm
Angle Contact : CM02A-APC-1820
58
M12×1 Thread
φ21
φ23.6
A
A
(Contact No.1)
White
Red
(Contact No.4)
(Contact No.2)
Blue
Black
(Contact No.5)
(Contact No.3)
SectionA−A
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
4
CM02 Series
Unit:mm
○ “ T ”Tap
P/N : CM02-8D2TA5-CF
φ4.5
17
15
23.6
18.4
10.2
φ7.8
2.5
31.5
φ14
φ14
16.8
5.7
2.5
JAPAN
Jack
(Pin)
15
Plug
(Socket)
Plug
(Socket)
○ Terminating Resistor With Pin Contacts
・Terminated between No. 4 and No. 5 with resistor,
121 ohm,1/4 watt.
P/N : CM02B-8DER5P
M12×1 Thread
121Ω
φ15
1 NC
2 NC
3 NC
4
5
43
Wiring Diagram
○ Terminating Resistor With Socket Contacts
・Terminated between No. 4 and No. 5 with resistor,
121 ohm,1/4 watt.
P/N:CM02B-8DER5S
M12×1 Thread
121Ω
φ15
φ8.1
1 NC
2 NC
3 NC
4
5
40
Wiring Diagram
○ Receptacle with Plastic Shell and Pin Contacts, Type 1
P/N : CM02-8DR5P-CF
23
M12×1 Thread
17
2
φ1
3
3 Max.
(Panel Thickness)
M14×0.75 Thread
40
13.1 0
17
4
+0.1
+0.1
1
φ19.6
13.1
・P C B Contacts
・Rear-mount configuration
・Applicable wire size : AWG22 max.
Mounting Hole
○ Receptacle with Plastic Shell and Pin Contacts, Type 2
P/N : CM02-8DR5P-CF(D5)
・P C B Contacts
・Rear-mount configuration
・Applicable wire size : AWG22 max.
19.4
.6
19
17
(13)
17
4
+0.1
0
2
3
M12 1 Thread
M14 0.75 Thread
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
5
(2.7)
3 Max.
(Panel Thickness)
4
φ1
+0.1
13.1 0
φ
1
Mounting Hole
CM02 Series
Unit:mm
○ Receptacle with Plastic Shell and Pin Contacts
P/N : CM02-8DR5PD(D1)-FG
φ14
12.2
・P C B Contacts
・Rear-mount configuration
6
1
+0.1
0
+0.1
0
Board Thickness
1.6 ±0.2
Coding Pin
φ1.4
5.9
1.5
M12×1 Thread
9
No Printed Area
19.6
3.5
2.5
5-φ1
M14×0.75 Thread
5
φ1
23.4
2.5
17
17
φ8.3
12
3
5
2
4
1
Panel Mounting Hole
3 Max.(Panel Thickness)
2.5
φ1.6±
2.5
5°
4
Board Mounting Hole
○ Plug Receptacle with Metal Shell and Socket Contacts
P/N : CM02-8DPR5S-CF
15.8
4
3
1
4
3
21.9
φ20
1
2
φ13.7
・Applicable wire size : AWG22 max.
+0.1
15.1 0
M12×1 Thread
・Rear-mount configuration
2
φ16
+0.1
0
19
M16×1 Thread
Mounting Hole
○ Plug Insert Assembly with Socket Contacts for PCB Mount
3.
2
45
°
2.5
Coding Pin
φ1.4
2.5
°
45
φ1.6 ±0.1
φ10.5
5-φ1
2.5
φ8.1
3
1
4
5
・P C B Contacts
・No shell
2
3.5
2.5
P/N : CM02-8DP5SD(D1)-FG
3.2
10
15
Board Mounting Hole
○ Receptacle Cap
PVC Cap for Receptacle
P/N:CM01-CAP
Metal Cap for Receptacle
Metal Cap for Receptacle
P/N : CM01-R-CAP-CF
P/N:CM01-R-CAP(D1)
Non-Waterproof type
Waterproof type
Waterproof type
Material : PVC/Black
Material/Finish : Copper Alloy/Nickel Plating
Material/Finish:Aluminum Alloy/Anodic Coatings
18
φ14
φ14
φ16
φ11.5
13
13
100
.2
φ3
straight knurl
○ Plug Cap
φ14
Metal Cap for Plug
P/N : CM01-P-CAP-CF
Waterproof type
Material/Finish : Copper Alloy/Nickel Plating
8.7
14.3
◎ Specifications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specifications with our drawings would be highly appreciated.
http://www.ddknet.co.jp
6
Similar pages