10/100Base-TX Interface Module for NIC/HUB Applications ELECTRONICS INC. EPF8119S & EPF8119S-RC • Robust construction allows for toughest soldering processes • Guaranteed to operate with 8 mA DC bias at 70°C on Cable Side • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards • Wire Insulation Class : MW 80C • 1500 Vrms Isolation Electrical Parameters @ 25° C Insertion Loss (dB Max.) OCL @ 70°C Return Loss (dB Min.) Common Mode Rejection (dB Min.) 100 KHz, 0.1 Vrms 8 mA DC Bias 1-80 MHz @ 100 MHz 1-30 MHz 30-60 MHz 60-100 MHz 1-30 MHz 30-100 MHz 100-500 MHz Cable Side Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 350 µH -1/-1 -1.5/-1.5 -18/-18 -12/-12 -10/-10 -40/-40 -30/-30 -10/-10 • Crosstalk (dB Min.) Between Channels 1-10 MHz 10-100 MHz -40 -35 Impedance : 100 Ω Xmit / 100 Ω Rcv • Rise Time : 3.0 nS Max. • Package Schematic Transmit Channel .490 (12.45) .055 (1.40) .050 (1.27) .070 (1.78) PCA EPF8119S(-RC) Date Code .270 (6.86) .410 (10.41) Suggested Solder Pad Layout TD+ 1 16 TX+ CT 15 CT 2 TD- 3 14 TX1CT : 1CT Pin 1 I.D. Receive Channel .030 (.762) .350 (8.89) .010/.015 (.254/.381) .190 (4.83) RD+ 6 10 CT CT 7 .008/.012 (.203/.305) 0°-8° 11 RX+ RD- 8 1CT : 1CT 9 RX- .035 (.889) .016/.022 (.406/.559) .050 (1.27) .380 (9.65) Notes : 1. Lead Finish EPF8119S EPF8119S-RC SnPb Hot Tin Dip (Sn) † 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 245°C MSL = 4 (168 Hours, ≤30°C/60%RH) (72 Hours, ≤30°C/60%RH) 0.92 grams 0.92 grams 40 pieces/tube 650 pieces/13” reel 40 pieces/tube 650 pieces/13” reel (*EPF8119STR) (*EPF8119STR-RC) 4. Weight (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) † Lead Material : Matte Tin with Ni Barrier Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8119S & -RC Rev. A4 6/5/06 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com