Purdy AND116CR Gaaias red light emission Datasheet

AND116CR
Ultra Bright LED Lamps: Type 1
Weight: 0.35 g
Unit: mm
1
ø5.8 0.2
AND116CR
GaAIAs Red Light Emission
T-1 3/4 Package (5 mm)
ø5.0 0.2
11.15 –0.1
+0.4
• Double hetero structure die
• Peak wavelength (λp = 660 nm) high bright emission
• All plastic mold type, milky diffused lens
• Low drive current
• Solid state reliability, long life
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse drive
• High brightness for outdoor applications
• RoHS Compliant
17.5 1
(1)
2.5 max
7.65 0.2
Features
0.5
(2)
Maximum Ratings (T = 25°C)
2.54
0.5
Cathode Index
1
2
1. Anode
2. Cathode
Characteristics
Symbol
Rating
Unit
Forward Current
IF
50
mA
Reverse Voltage
VR
4
V
Power Dissipation
PD
125
mW
Operating Temperature Range
TOpr
-20 to 85
ºC
Storage Temperature Range
TStg
-30 to 100
ºC
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
VF
IF = 20mA
–
1.75
3.0
V
Reverse Current
IR
VR = 4 V
–
–
100
µA
Luminous Intensity
IV
IF = 20mA
56
130
–
mcd
Peak Emission Wavelength
IP
IF = 20mA
–
660
–
nm
Spectral Line Half Width
∆λ
IF = 20mA
–
25
–
nm
Dominant Wavelength
λd
IF = 20mA
–
640
–
nm
Full Viewing Angle
θ
IV = 1/2 Peak
–
60
–
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 3 sec. max
Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
6/14/07
AND116CR
GaAIAs Red Light Emission
Ultra Bright LED Lamps: Type 1
IF – VF
IV – VF
5
Ta = 25C
30
Relative Luminous Intensity IV
Forward Current IF (mA)
50
10
5
3
2
1
0.5
0.2
0.1
1
1.5
1.6
1.7
1.8
1.9
2.0
2.1
1
2
Forward Voltage VF (V)
5
10
20
50
Forward Current IF (mA)
IV – TC
Relative Luminous Intensity – Wavelength
3
1.0
Relative Luminous Intensity
Relative Luminous Intensity
IF = 20 mA
1
0.5
0.3
0.1
-20
0
20
40
6.0
Ta = 25C
0.8
0.6
0.4
0.2
0
600
80
620
640
660
680
700
720
Wavelength λ (nm)
Case Temperature TC (C)
Radiation Pattern
IF – Ta
20
10
0
10
20
30
30
40
40
50
50
60
60
70
70
80
80
Allowable Forward Current IF (mA)
80
60
40
20
90
90
0
0.2
0.4
0.6
0.8
0
0
20
40
60
80
Ambient Temperature Ta (C)
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
100
6/14/07
Similar pages